New AMI BIOS tool for performing SSV2/3 and Dynamic SLIC Modification

Discussion in 'MDL Projects and Applications' started by andyp, Jan 7, 2009.

  1. andyp

    andyp SLIC Tools Author

    Aug 8, 2008
    1,673
    2,570
    60
    Removed them on my Maximus 2 Formula with no ill effects noticed (nor anything strange in RW reports or everest hardware dump)

    Andy
     
  2. JohnnyC

    JohnnyC MDL Novice

    May 12, 2007
    24
    0
    0
    Hi Andy,

    The new 1.39 version of your program successfully removed the Asus OEMX config lock!! We are lucky to have someone as knowledgable as you in this community!:)

    Cheers
    JohnnyC
     
  3. laidbacktokyo

    laidbacktokyo MDL Junior Member

    Aug 18, 2007
    77
    19
    0
    Andy-sensei,

    I'm really sorry to spend your precious time if the problem is a lo*der.

    Yes, now there are two OS installed on that desktop with the same boot >> 1st - Vista Ult x64 & 2nd - Win7 Ult x64 RC 7264 >> both activated by some patches.
    BTW, both of those RW-data files as provided were made under Vista, but visible results in both RW & Everest are same SLIC2.0 under Win7 as well.

    Do your mean that the 2203SLIC BIOS file is OK and the flashing procedure was OK many times,
    but every time when I start either Vista or Win7 I'm getting the wrong SLIC-data results (only SCIC?) by RW & Everest because of lo*der(s) with SLIC 2.0?

    And what shall I do now? :(
    Something like >> clean install of either Vista or Win7... OR both because of the same boot manager in use... then to install there RW & Everest and check SLIC?
    Or any other options: 1. to cure (because I'd prefer to try to install Win7 OEM Final w/o any lo*der(s) after Oct. 22)... or 2. just to check the real SLIC-info in BIOS?


    Please advise.


    THANKS A LOT!
     
  4. urie

    urie retired mod

    May 21, 2007
    8,999
    3,381
    300
    If you have modded your bios to slic 2.1 and have used loaders format machine start from scratch.
     
  5. andyp

    andyp SLIC Tools Author

    Aug 8, 2008
    1,673
    2,570
    60
    Loaders will overwrite the SLIC in BIOS, I strongly suspect thats the problem... the BIOS mod looks fine.

    I think you have to boot off CD into recovery console and use bootinst to rewrite bootldr, and mbr but I am not sure.

    I will ask busykid or 911medic to post.... they probably know better than I

    Andy
     
  6. andyp

    andyp SLIC Tools Author

    Aug 8, 2008
    1,673
    2,570
    60
    Have you actually flashed the modded BIOS??

    Andy
     
  7. JohnnyC

    JohnnyC MDL Novice

    May 12, 2007
    24
    0
    0
    yes!!!!! flashed with Asus AFLASH2 utility under DOS - RW Everything now no longer shows OEMX table but SLIC table and activation is successful! (IIRC - i think mod tool log said method 4 FYI).
     
  8. laidbacktokyo

    laidbacktokyo MDL Junior Member

    Aug 18, 2007
    77
    19
    0
    THANKS AGAIN! I'll be duly wating for any of your advice.
     
  9. laidbacktokyo

    laidbacktokyo MDL Junior Member

    Aug 18, 2007
    77
    19
    0
    Thanks for your attention to the matter. :)
    I undestand that to delete-create partition(s), format, clean install is the best solution by default, although it takes more time :D
     
  10. andyp

    andyp SLIC Tools Author

    Aug 8, 2008
    1,673
    2,570
    60
    Probably safest as this rewrites the MBR as well.

    Andy
     
  11. luky

    luky MDL Addicted

    Dec 21, 2008
    729
    33
    30
    andyp now that is no longer the current could be shown as a picture of the tools for Phoenix Bios modd ....
     
  12. andyp

    andyp SLIC Tools Author

    Aug 8, 2008
    1,673
    2,570
    60
    Hurrah!! Thanks for letting us know. :D

    Andy
     
  13. anonim1979

    anonim1979 MDL Novice

    Oct 12, 2009
    5
    0
    0