I got the floppy disc drive. I can't get it to do anything. Power light comes on, but nothing else. Does this mean my BIOS chip is fried? It won't turn on, no lights.
You do not give any remarks or links. It is difficult to understand how to help you. Give a link to the original firmware file of your laptop, and a link to a fatal file.
So, when you use the utilities from Var2-4 the BIOS flashed successfully without any errors? Are there any changes in the RWE report after flashing a modified BIOS? Can you provide RWE report for modified bios ?
Hi serg008, I don't want to seem like I'm causing a problem but the user guide for this unit states that once bios has been updated it is not possible to downgrade the bios to a lower version. If I do manage to downgrade the bios to 1.06, will we still be able to go back to 1.07. Thank you for your time and help sadsack
Serg008, I got the floppy disc. But I've not had any luck with getting it to even attempt to power on. Think it's dead? The chip itself? Or should I just keep reflashing the floppy? No lights, no indication of any life.
Got real excited, was presented with following error message "The specified BIOS data file is corrupt or is a format that cannot be used by this program. Please specify the correct BIOS data file for this model". Bummer. Anything you can do to help would be appreciated. There were two .exe files, the one labeled SLIC produced the error while the other was indeed the machines BIOS. Many thanks!
Is this a generic fix for this error message or is it specific to this BIOS? I get this same error message when flashing my Lifebook T2010. Thanks!
Try this: Fujitsu_Lifebook_T2010_FUJITSU_SLIC_DYNAMIC.rar mediafire.com/?5i888fs9fnw9l4b Please post results.
OK, flashed BIOS actually using using the original mod you posted and hex editing the .exe in the temp folder, installed a SLIC 2.1 compliant Windows 7 Ultimate, never entered a key, System reports back as Windows is activated. Am I golden or did I just get a boot loader which will invariably stop working? How do I check that SLIC 2.1 is loaded and working?? Thanks for all your help! TA