You have to get into bios by pressing F1 or F10 and change the boot order to USB Hard Drive. All Presarios and Pavilions have that function.
OK I dont know. I just ran the uninstaller for a few of the different emu loaders I was playing with and did a reboot now slic dump is back to showing 0.0 for SLIC version and of course windows when back to not acticated. See above slic dump image for what I currently see. Any Ideas? Thanks, MrChris
dell 8600 a08 Root System Description Pointer: 0x000FDF00 52 53 44 20 50 54 52 20 42 44 45 4C 4C 20 20 00RSD PTR BDELL . 00 00 FF 3F ...? Signature"RSD PTR " Checksum0x42 (66) OEM ID"DELL " Revision0x00 (0) - ACPI 1.0 RSDT Address0x3FFF0000 Root System Description Table: 0x3FFF0000 52 53 44 54 28 00 00 00 01 C8 44 45 4C 4C 20 20RSDT(.....DELL 43 50 69 20 52 20 20 00 1E 06 D5 27 41 53 4C 20CPi R ....'ASL 61 00 00 00 00 04 FF 3F a......? Signature"RSDT" Length0x00000028 (40) Revision0x01 (1) Checksum0xC8 (200) OEM ID"DELL " OEM Table ID"CPi R " OEM Revision0x27D5061E (668272158) Creator ID"ASL " Creator Revision0x00000061 (97) Entry00x3FFF0400 Fixed ACPI Description Table: 0x3FFF0400 46 41 43 50 74 00 00 00 01 80 44 45 4C 4C 20 20FACPt.....DELL 43 50 69 20 52 20 20 00 1E 06 D5 27 41 53 4C 20CPi R ....'ASL 61 00 00 00 00 F8 FF 3F 00 0C FF 3F 00 00 09 00a......?...?.... B2 00 00 00 70 71 97 80 00 08 00 00 00 00 00 00....pq.......... 04 08 00 00 00 00 00 00 20 08 00 00 08 08 00 00........ ....... 28 08 00 00 00 00 00 00 04 02 01 04 08 00 00 00(............... 32 00 32 00 00 00 00 00 01 03 00 00 00 00 00 002.2............. 35 02 00 00 5... Signature"FACP" Length0x00000074 (116) Revision0x01 (1) Checksum0x80 (128) OEM ID"DELL " OEM Table ID"CPi R " OEM Revision0x27D5061E (668272158) Creator ID"ASL " Creator Revision0x00000061 (97) Firmware Control0x3FFFF800 - FACS DSDT Address0x3FFF0C00 - DSDT Interrupt Mode0x00 (0) - Dual PIC PM Profile0x00 (0) SCI Interrupt0x0009 (9) SMI Port0x000000B2 (178) ACPI Enable0x70 (112) ACPI Disable0x71 (113) S4 Request0x97 (151) PSTATE_CNT0x80 (128) PM1a_EVT_BLK0x00000800 (2048) PM1b_EVT_BLK0x00000000 (0) - Not supported PM1a_CNT_BLK0x00000804 (2052) PM1b_CNT_BLK0x00000000 (0) - Not supported PM2_CNT_BLK0x00000820 (2080) PM_TMR_BLK0x00000808 (2056) GPE0_BLK0x00000828 (2088) GPE1_BLK0x00000000 (0) - Not supported PM1_EVT_LEN0x04 (4) PM1_CNT_LEN0x02 (2) PM2_CNT_LEN0x01 (1) PM_TMR_LEN0x04 (4) GPE0_BLK_LEN0x08 (8) GPE1_BLK_LEN0x00 (0) GPE1_BASE0x00 (0) CST_CNT0x00 (0) P_LVL2_LAT0x0032 (50) P_LVL3_LAT0x0032 (50) FLUSH_SIZE0x0000 (0) FLUSH_STRIDE0x0000 (0) DUTY_OFFSET0x01 (1) DUTY_WIDTH0x03 (3) DAY_ALRM0x00 (0) - Day alarm not supported MON_ALRM0x00 (0) - Month alarm not supported CENTURY0x00 (0) - Century alarm not supported IAPC_Boot_Arch0x00 0x00 Reserved0x00 (0) Flags0x00000235 WBINVD1 - WBINVD instruction fully supported WBINVD_Flush0 - WBINVD instruction not for sleep states (Don't care if WBINVD=1) PROC_C11 - C1 power state: all processors P_LVL2_UP0 - C2 power state: UP system only PWR_BUTTON1 - Power button not support or handled by ASL code SLP_BUTTON1 - Sleep button not support or handled by ASL code FIX_RTC0 - Fixed register support RTC wake RTC_S40 - RTC wakeup support: S1, S2, S3 TMR_VAL_EXT0 - 24bit PM Timer DCK_CAP1 - Docking supported Firmware ACPI Control Structure: 0x3FFFF800 46 41 43 53 40 00 00 00 FF 00 00 00 00 00 00 00FACS@........... 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00................ SignatureFACS Length0x00000040 (64) Hardware Signature0x000000FF (255) Waking Vector0x00000000 (0) Global Lock0x00000000 (0) Flags0x00000001 S4BIOS1 Reserved0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Reserved0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Reserved0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Differentiated System Description Table: 0x3FFF0C00 Signature"DSDT" Length0x00002C70 (11376) Revision0x01 (1) Checksum0x50 (80) OEM ID"INT430" OEM Table ID"SYSFexxx" OEM Revision0x00001001 (4097) Creator ID"MSFT" Creator Revision0x0100000E (16777230)
I know it needs to be on a clean install. I was using HAZARS 1.5 to simply install the cert and key not the loader (but I think I might have on accident). without reinstalling the whole os. what is the easiest way to remove all loaders? I only played with 2. and I ran the uninstaller for both of them. I had just a few minutes ago installed the second loader for the first time on accident. My bad.
Can you please post a SLIC 2.1 Bios for this notebook? notebook hp compaq nc6320 last bios f.0E please help me to find it s 3 days im not sleeping for find it i try to do it but im not able thank uuu