alright i got it loaded finally now i get an error message "the bios in this system is not fully acpi compliant. please contact your system vendor for an updated bios." technical information: ***stop: 0X000000A5 (0X00000011, 0X00000007, 0XFFD0D010, 0X01000E)
All we did was change out the slic...I dont think the tool adjusted the SLIC checksum. I just see they are different in the bios. tool mod = 0 cksm original = B8 chksm Should have done manually, but the tool is safer, I thought.... Do you have a recovery???
It is not winflash but in BIOS SETTINGS when you reboot the machine...if you are using winflash, go to advanced settings and change the settings.
My opinion is to turn it over to yen, for another mod. I have a feeling that the flash is not flashing the entire bios. The bios is likely in a protected area of the bios. I think maybe adjusting the flash parameters may be in order..You can add the /FORCE parameter to the DOS flash. I will look at the winflash ini..