Tested again. Still with no luck. I cannot get the bios to load with the flashaid. The checksum program does not work because it uses FlashDrv.sys which does not read the biosbeader.ini. Anyway, I tried the ORIGINAL 1.13 package and it said the "BIOS data is not correct for this model".
In the phlash.ini file add this: [UI] Advanced=1 Then when you've started winphlash again, press the now available advanced button. At flags check only verify block after programming. Anything else should be unticked. Anything else should be unticked. There is also a program that you downloaded called FujFlashCk which will help with checksums
I have used the FujFlashCk to calculate check sum and put it in biosheader.ini but the flashaid program seems to ignore it. I search in some other forum that it only work in GABI interface. I cannot get into the advanced button. No matter what I have put in the new file path, it prompts 161 error. I tried 3 different versions already.
Lifebooks have always been a pain in my ass after modifying them....the mod is correct but there is something in fujitsu motherboards that makes it difficult to flash the bios.... Let me look into it but I am out of answers....
I have try all of the rom file you provided with the winphlash. None of the rom file seems valid (with 161 error). And winphlash wont do anything if I did not supply a good new bios file. I managed to get a valid one from gigabyte and the winphlash start and backup my bios. the backup file is 1072KB in size (so as the gigabyte one) so I doubt the rom you provided has something missed.
I just spent the last several minutes looking up information on how to flash your bios and there is nothing....call fujitsu support and see if they can help you....do not mention that you have a modified bios file for this will void any warranties which you may have....just tell them you need to update the bios with the 1.10 version to fix some known issues and it will not flash correctly.