Ok as you requested I have reflashed with original download for HP this morning removed all loaders (agian) also decide to play devils advacate and deleted all partitions and reformated HDD and reinstalled windows. Should be golden now REQUEST REMOVED I FIGURED OUT IT I THINK I WAS SELECTING WRONG FILE. NOW ACTIVAED AND DOWNLOADING UPDATES. Thank you thank thank a thousand times thank you. Going to ADD bios to database
hey Oowner I searched the forums for you and found a link saying you may already have slic 2.1 did you verify that first? Its easy with Slic dump, see very first post it tells you how to do it. I also see that you do not have RW everything report the modders are gonna want that it is needed to mod your Bios. I think you like to download the BIOS may be bad came up 404 for me. I am NOT a modder I have tried mine and I can't get it to work but i have read about 30% of the topic. I know for sure you gonna need the above mentioned stuff
Thanks again imatrix, I think I have done a Bootable USB Flash Drive by your instructions, and now on the road to the usb flash for Crisis Pendrive Recovery, question 1. I do not understand where this " original bios " you mentioned should be found, and question 2. according to the instructions given by "Pen_Drive_Recovery" at procedure no. 3.)Remove your stick and reconect, copy in the stick the "MINIDOS.SYS"-"PHLASH16.EXE"so copy these two files only to usbstick, am I right?
you can just post whether the mod works for you or not regarding the incomplete SLIC, just post your request here and we will try.
in your case, floppy drive wont work since the bios size is already bigger than 1.38MB. i see you worry too much, you may be better off with a Daz Loader or Hazar RemoveWAT.
see, oh I am sorry, may be you are right, just worry what if system bios gone out, and remedy action not in place or not working, in this circumstance like to know what others will do? but anyway I will still take the odd anyway due to fact that win 7 is too attractive to miss. no, I have tried too many time on daz loader method and its not working for me, as i know this should be the different meaning, am i right? thks
finally, I have done both, the flash and the recovery usbstick, now ready to try! btw, after flashing, next would be activating win7, do I have to use loader7 to activate? many thks imatrix
there is no need loader anymore. make sure you remove any loader you have. yes you request, but pls provide a complete info.