to obtain the old card ID: 1. Boot into windows. 2. Now you can obtain exact ven, dev & subsys id's from device properties. to obtain the new card ID : -- мод прошился нормально, сообщений об ошибках не было ? Драйвера для новой карты есть ? если есть - дай ссылку драйвера нашел на сайте интела - там сразу для кучи карт (перебирать - нереально) найди ID новой карты - тогда заменю
Все прошилось отлично без ошибок драйверов к сожалению нет покупал на ebay карту пришла без диска, к сожалению способ воткнуть на гарячию тоже не срабатывает когда вставляю ноут зависает вытыкаю развисает и процесс загрузки идет дальше, сначала подумал карта негодная вынул из другого ноут бука вставил в свой такая же история, что можно еще сделать Вы моя последняя надежда иметь нетбук с нармальной сетевухой
в ставлял в нессколько ноутбуков но там bios выдает устройство не авторизированно выключите и извлеките
Whitelist есть в HP и Lenovo, пробуй в любой другой или в десктоп (заодно убедишься что карта рабочая. В моде я полностью пропатчил проверку - этот метод был уже проверен на пред.версии биоса) -- Try another laptop/Desktop. I have patched the whitelist check in my mod - this method has been tested for previous version of the bios for this netbook
да у нас на работе в основном lenovo да hp, дома у жены acer но его весь нужно разбирать чтоб добраться да слота, а в десктопе такой же pci express?
Наконец то получилось получить id новой карты правда пришлось разобрать нетбук жены Finally we got a new id card really have to disassemble the netbook wife PCI\VEN_8086&DEV_008A&SUBSYS_53058086&REV_00 PCI\VEN_8086&DEV_008A&SUBSYS_53058086 PCI\VEN_8086&DEV_008A&CC_028000 PCI\VEN_8086&DEV_008A&CC_0280 PCI\VEN_8086&DEV_008A&SUBSYS_53058086&REV_00\4&23C6FC68&0&00E1
serg008 Could you send instructions on making devices in the white list, and to turn off checking the white list for Phoenix BIOS has instructions for AMI has not found, do not know whether you need to disassemble the ROM file or not if yes then how and what to watch Hex file editor. Of course I would like in Russian, if not will deal in Russian and in English. Advance very grateful if the forum difficult to spread on the send [email protected]
Sorry, I have no an instructions Just open the bios with Phoenixtool (or Amitool), search the module in DUMP folder with whitelist, disassemble it (e.g. with "HDasm") and find the code where there is a check for the device in the list
Serg008, GPU is working fine, but i can only use the laptop through my hdtv. at 1024x768! If i try to use the laptop unconnected to the tv, all i get is a blank screen from boot-up, but i still get win7 sounds, i can't even access the bios unless i'm connected to the tv. Any advise on how cure this problem?
Connect to hdtv and check bios settings, try to uninstall the latest updates , run sp48079.exe again...
Thanks, but i have already checked my bios and everything seems ok, i applied the modded slic 2.1 bios file for my laptop, so i could get win7 activated. (using my tv) updates are from komm's updater, which dl's official and non-official updates. I'll backup my stuff and do a complete reinstall of win7 with sp1 untouched iso, and see if that helps. If it does i'll stick to what MS releases on WU.
Update to last post, i have reinstalled win7 sp1 and then applied the bios update. Then i switched the laptop back on, but still a blank screen. The only time the laptop screen has anything on it, is when it's connected to the tv, even when it restarts, so something is a miss somewhere in the bios. i will have to take it to PC World to get it repaired, as they still have the parts for my laptop.