The exact error message is "WIRELESS MODULE NOT SUPPORTED, THE SYSTEM HAS DETECTED A WIRELESS MODULE INSTALLED IN THE SYSTEM IS NOT SUPPORTED, SYSTEM HALTED. PLEASE REMOVE DEVICE AND RESTART. WLAN MODULE ID (702)." I rechecked the IDs and the new one I want to add is PCI\VEN_8086&DEV_422C&SUBSYS_13018086&REV_35 thank you in advance for any suggestions
hello, could you please tell is it possible to remove whitelist check or just add or change id of the wifi card to this model of laptop : compaq pessario CQ62-209wm, there is insyde bios bin file from HP's site(f.15) and i've got the old bios (f.6) via directly reading W25Q16 on programmer made by myself. sorry for my bad english
These bios are using VEN DEV and SUBSYS as criteria, concerning changing the ID of the card, exept for an hold model (INTEL 2200BG ) i dont know if somebody figures out to do that. good luck.
sorry I'm stuck, i don't see what i can doing more, and also i dont understand the relationship between the wlan card and this error message "System configuration Data Write Error"
Whitelist Hi TTAV123, In the original bios update were there any mini pci wireless cards in the whitelist? If you could tell me which card or cards are suitable I could try to get one. Sorry to take up so much of your time. Regards.
Code: seg000:5F53 test_WLAN proc near ; CODE XREF: seg000:5F4Fj seg000:5F53 push bx seg000:5F54 mov dh, 2 seg000:5F56 mov dl, 0 seg000:5F58 mov bx, 230h seg000:5F5B call far ptr 0F000h:4CB4h seg000:5F60 pop bx seg000:5F61 cmp eax, 38731260h ; VEN_1260&DEV_3873 Intersil PRISM2 11Mbps Wireless LAN PCI seg000:5F67 jz short loc_5F73 seg000:5F69 cmp eax, 12168Ch ; VEN_168C&DEV_0012 ATHEROS AR5001X MINI PCI WIRELESS seg000:5F6F jz short loc_5F78 seg000:5F71 jmp short loc_5F7D seg000:5F73 ; --------------------------------------------------------------------------- seg000:5F73 seg000:5F73 loc_5F73: ; CODE XREF: test_WLAN+14j seg000:5F73 mov ax, 9601h seg000:5F76 jmp short locret_5F82 seg000:5F78 ; --------------------------------------------------------------------------- seg000:5F78 seg000:5F78 loc_5F78: ; CODE XREF: test_WLAN+1Cj seg000:5F78 mov ax, 9602h seg000:5F7B jmp short locret_5F82 seg000:5F7D ; --------------------------------------------------------------------------- seg000:5F7D seg000:5F7D loc_5F7D: ; CODE XREF: test_WLAN+1Ej seg000:5F7D mov ax, 9600h ; replace 9600h by 9601h seg000:5F80 jmp short $+2 seg000:5F82 seg000:5F82 locret_5F82: ; CODE XREF: test_WLAN+23j seg000:5F82 ; test_WLAN+28j seg000:5F82 retn seg000:5F82 test_WLAN endp seg000:5F82 that's all i've found
Hi TTAV134, Do you think adding my card to the whitelist in the original bios update would be worth a try? Regards.
i dont think so,it is not a whitelist but a decision tree, and i already patched it with no result, i'm sorry i must stop investigations on this bios i have a to do list in late.
going deeply in the code I've notice that there is 2 separates whitelists, i made a patch to append these 2 lists. Sent you a PM with the link.
Hi, I just got a lenovo x120e. It seems to be using a different bios than the one posted on the ibm driver page. My pc uses 1.08 vs 1.04 from ibm page. So, I was wondering any one could tell me how to dump my current Bios so you guys would be able to mod that instead, I'm just not sure if there will be compatibility issue differences between the 1.04 and 1.08 bios. Manufacturer : Lenovo Motherboard Model : Thinkpad X120e (Machine type: 0596) -CTO Current Bios Revision : 1.08 Bios Type : Phoenix Bios Bios Download link for 1.04 1.04 Bios The card I intend to use is the Intel 6300 This one from amazon: Intel 633 Oops: Forgot to post pci-id Intended Future Card: pci\ven_8086&dev_422b&subsys_11018086 Current Card: lenovo 1x1 something something PCI\VEN_10EC&DEV_8176&SUBSYS_819510EC&REV_01 PCI\VEN_10EC&DEV_8176&SUBSYS_819510EC PCI\VEN_10EC&DEV_8176&CC_028000 PCI\VEN_10EC&DEV_8176&CC_0280