Remove whitelist check / add ID's to break hardware restrictions mod requests.

i've already try to remove the whithelist protection in a dumped bios ot this machine with no success, sorry i can't do it.

regards

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

Thanks for the VERY fast response AND fix!

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

have you test the bios mod?

 

i have an error with winphlash64 "Image file %s is either not valid or is damaged. Plataform Signature not found in the interdaface. Error code -103"

i have win7 x64.

Thanks.

 

something you omit to say, you are using X64 platform, it seems that winphlash64 doesnt work with these x61 machines, in this case i must develop a DOS or CD flashing solution (will take a while), or you can boot from a XP cdrom like Bart PE

let me know, you prefer to wait for DOS or CD flashing solution, or you build a Bart PE XP cdrom

 

ok in installed your mod bios, dont work again, but the problem is different, now the wwan light turn on in windows but turn off beacuse now dont recognizes the sim, the software sierra wireless watcher says "no sim inserted."

now i try it with the original wwan card and inform you.

 

ok, with the original lenovo card work perfect with te sim card.

now i try install the non lenovo card but the pin 20 active.

 

You need to login to view this posts content.

 

ok, with the pin 20 free, dont appear in windows, i tri again with the pin 20 censored, and work fine for 5 second, after the radio power off

i see changes, before when i turned on the radio, the wwan led flashin on of withoun led on always for these seconds. now when i turn on the radio, rhe led is always on for 3-5 seconds, and after the led flashing on/off for 3-5 seconds and the radio turn off .

Thanks.

i need try for the hardware id, but i don't have the tools for work in the bios.

if anybody want try add theses changes:
urrent original card (mc8775): SWMUXBUS\SW_NET_0_VID_1199&PID_6813
-Card to be added (mc8790v): SWMUXBUS\SW_NET_0_VID_1199&PID_683c

 

ok i make a bios with the hardware mod, but not work too.

 

thx TTAV134 but still does not work something is missing....

 

i've not figure out to remove whitelist protection on this bios, sorry

 

Maybe because it is ibm thinkpad card.

 

You need to login to view this posts content.