I am not sure if I am doing this properly or not it pops up red I went in and loaded MP but it didn't exactly do to much It is pluged into a 3.0 and I've tried a few ports
Btw does the retail Microsoft 10 usb Thumb Drive has a Microsoft windows10.ico file to show in explorer when inserted in a installed windows PC?
If you're already flashing it, keep the drive plugged in, as quite a few of the MP flash tools will act as if it has frozen and show no progress for a while. If you remove the drive during the flash process you may as well throw the USB drive away (kinda' like shutting down a PC in the middle of a BIOS flash). I do have the .bin + flash tool that will work for this
I couldent really get it too do anything if you could link my too a workingflash tool that would be greate but so far no luck
I'm getting the following error. I am using a USB 3.0 port. Edit: Got it to work. I had to select the burner and firmware files in settings as they were defaulted to the wrong directory. Thanks again for your help! How did you determine which version of Phison MPALL to use?
Woooo! Congrats and glad I could help! I determined which version of MPALL to use by good ole trial and error. I believe the version I and others suggested is the first version to support the PS2251-07. Newer versions would probably work too.
That tool should work for your device as well. Only difference being when you are in settings, change the controller dropdown from PS2251-07 to PS2251-03.
Hello, I'm new. I've found this thread to repair KDI-MSFT USB Device. Followed the instruction quoted but I got error: "CT 0x1042". How to resolve? Tnx
Look guys.. Go buy cheap 2.0 or 3.0 High speed 8GB or 16GB USB Stick and download Windows 10 Media Creator.. you are done.. Why bother all these hassle all this post.. AS today I can get for $5.00 to $15 bucks for Flash drive..
It works for me , I use v5.03.0A-DL07 for it. Thank you and other peoples in this thread, have a nice day.
Hi i was trying to remove this write protection for a very long time i have microsoft usb with 1607 on it and this is how my usb presents in chipgenius : Description: [D:]Urządzenie pamięci masowej USB(KDI-MSFT Windows 10) Device Type: Mass Storage Device Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port Current Speed: High Speed Max Current: 300mA USB Device ID: VID = 0951 PID = 16AA Serial Number: 001A92053F4DB131D274C1C9 Device Vendor: KDI-MSFT Device Name: Windows 10 Device Revision: 0110 Manufacturer: KDI-MSFT Product Model: Windows 10 Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-07(PS2307) - F/W 08.01.50 [2017-01-17] Flash ID code: AD3A18030050 - Hynix [TLC] Any tutorial and files to reflash newer version onto this usb greatly appreciated !
Im ultra happy it worked and can finally use MCT on the usb made for that exact reason which is to install windows from !
You're welcome as it was my research into the issue and solution that he and apparently you used to fix it. But it's good that apparently you don't need to use MPALL at all if I am reading this correctly. Not sure why you guys had issues with my instructions when someone else with the same exact chipset got it to work but whatevs.
I could be wrong but i think that using this usb means its compatibile as a device because other usb's sometimes are storage ones and not the ones that you can boot from . I can already tell the difference in how my system works after using mct on this usb and fresh installing latest version . I just think this usb is compatibile as a device to install windows from not like some usb's which are designed to store data rather than boot from. Thats just how it looks and feels for me and its so much better with this usb compared to all sandisks and kingsotns ive used in the past . Just my 2 cents !