Is there a newer SLP marker utility for "HP Probook 455 G1" ?? I ask this because I have a HP Probook 455 G1, that was delivered with Windows8 and i want to activate Windows 7 (Slic 2.1) I've done this in the past (on different HP computers) with nbdmifit. Downloaded the latest i could find. (NbDmiFit11D) When i run it it gives me the message "MPM is locked, escalate to 3LS to get SMB blob to unlock MPM" I then tried an earlier version of NbDmiFit but got an error message that my computer is not supported. Have anyone successfully got windows 7 activated on a "HP Probook 455 G1" (Bios mod or SLIC Marker utility) ?? Perhaps there is a newer Nbdmifit that i can't find
HP dv4 Not sure if this has been posted before but: Unlock win 7 slic on HP DV4 5xxx (may work on other platforms with BIOS F.34 - SP60266.exe) PCID: 068D100000245710000620100 tested on an HP ENVY dv4-5260nr
problem to find utility for hp435 ... telling me need to check csn for the utility ... and i cant find it i look for many thing ... can you help me ?
Flashed Lenovo B590 (20206) using Lenovo-B490-,-B590-(TP-H1-,-TP-H5-,-TP-H9).rar. Slic marker unlocked. Many thanks for the helpful tool!
@Tito Tito please can you push me to the right direction: When I used the SLP Marker File Update Utility for Thinkpad R500 (R500-TP-7Y) and the update was successfully must I also use a cert file within win7 for activation? In case of yes, what cert must I use in windows 7. I think I do not have the right cert file for lenovo. Many thanks
Hp CQ 45 - There is no OGNS in DSDT Hello Everyone, I replaced the motherboard for my Hp Cq45 laptop and started getting the invalid serial numbers in motherboard errors I downloaded the file located here NBDMIFIT Version 1.1D (credit goes to Overmaxx) Then I typed nbdmifit and get the message There is no OGNS in DSDT SHould I have to use a different version of NBDMIFIT ? Please let me know what to do next ? Regards Shanthi
Hello, First I'm sorry, I'm from Czech Republic and my English is not very good. My problem: I have a laptop HP625 (SUSE Linux ...) when I turn on the notebook appears: Product information not valid. The Following product information programmed into the system board is missing or invalid System board (OOA) - Product name Product Configuration ID Product Serial Number Product Sku Enter - continue ... If boot from HardDisk (Windows 8) do not work usb, sound and wifi. Other function are ok. The bios does not change anything if I change something and save, after system restart is always set back to default settings. I can not boot from anything other than the HardDisc. When I press F9 nothing happens (no change boot device). I updated the bios: 68DVA ver.F.21. That solution did not fix my problem. In another laptop I installed to the HardDisk FreeDos and put HardDisk back into the notebook and boot to FreeDos.And run NbDmifit.bat (11D) Display the information: JemnEx ... Can not terminate a permanent instance FreeCom System halted ... reboot or power off now, the information is replenished. Than I ran hpset152.exe: Press p to program mode Press 4 for HP625 I added the data... and hit enter: SLP is disable system board programmed sucessfully! Again, I ran a hpset152 and Press d to display mode: The data failed to complete. They are only empty. uuid 0x0000 ... Product Serial Number = ... SLP is disable I wanted to change to enable SLP. I ran hpbi103.exe read SLP: SLP value: Disabled I wrote then: hpbi103.exe write SLP ON: Asset utility ... Done. Again, I ran a hpset152 hpbi103.exe read SLP But the result is the same as before. SLP value: Disabled I really do not know how to solve this problem have some idea what to do next?
I downloaded the file: hp-650-655-eng-rar HP 620, 625 , 610, 615, 4510, 4515, 4520, 4525 , 4710 , 4715 , 4720 , 4725 run SLIC_ToolKit_V3.2 Dump OK ! ( HPQOEMSLIC-MPC_V2.1 ) and followed the instructions. But when I type: write slp on. (in freedos) Nothing will change. SLP stayed disable. Where can I download nbdmifit 1.10? I found many versions but not 1.10
HPBI103.EXE write slp on HPBI103.EXE read slp result: SLP: disable nbdmifit.bat result: JemnEx ... Can not terminate a permanent instance FreeCom System halted ... reboot or power off now, the information is replenished. Changes are not saved.