I have done with my CQ42-281TX with hacked HPBQ116.exe from "Prospective buyer of HP Mini 311 - BIOS mod possible?" thread to enable SLIC 2.1 on my machine. Sorry I don't have enough post count to create a link for you guys but it's in Windows 7 forum.
I'm looking for the same kind of EEPROM editing tool for HP ML110 G6 (Proliant servers). Above mentioned tool for notebooks, of course, cannot be applied to ML110. Any helps would be appreciated!!!!
Read the post about HP carefully and you'll find big collection there. You have to find the right one there
Hi, anmg. Thank you for your comment. I downloaded all the files of HP post and tried, however, unfortunately, almost all the file was not applicable to Proliant ML110 G6. (1) Trying history Below is the list of "not" applicable files. 2710p.EXE 6515B.EXE 6531s.EXE 6910p.EXE amtsupp.exe CpqAmt.exe DV1000.EXE DV1300.exe DV2000.EXE DV5000.EXE dv5100 .EXE DV6000.EXE F500F700.EXE FIND.EXE HP500.EXE HP520.EXE HP541.EXE HPBC242.exe HPBC254.exe HPBC259.exe HPBC266.EXE HPBC280.EXE HPBF185.EXE HPBF190.EXE HPBFL202.EXE HPBI108.EXE HPBI113.EXE HPBI123.EXE HPBQ114.EXE HPBQ116.EXE HPBQ120.EXE HPBQ131.EXE HPBQ193.EXE HPBW044.EXE HPBW054.EXE HPBW060.EXE HPBW380.EXE HPSET143.EXE IDEN.EXE NC24006400.EXE NXNC.EXE RSET8168.EXE TX1000.EXE ZE2200.EXE HPBFL204.EXE HPBFO100.EXE HPBI124.EXE HPBQ135.EXE HPSET146.EXE HPBC228.exe HPBI103.EXE HPBI130.EXE HPBFL211.EXE HPBFO200.EXE HPBQ138.EXE HPBW065.EXE HPSET14A.EXE (2) B1800.exe B1800.exe is active. The info is as follows: Product Name: ProLiant ML110 G6 Serial Number: CNG033S3PJ UUID:00112233-4455-6677-8899-AABBCDDEEFF Asset Tag: No Asset Tag Warranty: CRB-Foxhollow (3) HPBI103.exe It works, but cannot read SLP (errorcode 0x86) (4) Meinfo.exe It works. Intel(R) MEInfo Version: 6.0.40.1214 Copyright(C) 2005 - 2010, Intel Corporation. All rights reserved. Ignition firmware is detected on the system. FW Status Register: 0xEA110205 FW Status Register1: 0x000B001F Ignition FW Status(FAD_IDX): Using Data from Factory Default Image Ignition FW Status(BOOT_IMAGE): FW booted from Runtime Image Ignition FW Status(EVENT_LOG): Event Log is empty Ignition FW Status(ICC_STS): Clock programming successful Ignition FW Status(CF): Processor feature configuration successful Ignition FW Status(SWC): SWC application successful Ignition FW Progress: Intel(R) ME is sleeping Factory Default Partition Data is validated and healthy. Runtime Partition Data is validated and healthy. Factory Default Partition Code is validated and healthy. Runtime Partition Code is validated and healthy. Ignition Runtime Image FW version: 6.0.20.1185 Ignition Factory Default Image FW Version: 6.0.20.1185 (5) B2800.exe cannot read TYPE 0, but Type1 and Type2 are readable. UUID = "0x00 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa 0xbb 0xcc 0xdd 0xee 0xff 0x00 " Type 1 location 27 is HP Type 1 location 30 is ProLiant ML110 G6 Type 1 location 48 is Type 1 location 56 is CNG033S3PJ Type 2 location 15 is Wistron Corporation Type 2 location 35 is ProLiant ML110 G6 Type 2 location 53 is Type 2 location 61 is 0123456789
Hi. I try Intel DH55HC with oa2intel.exe DELL pubkey marker pgsign. The Windows marker file is out of day. Where I can find this files. Thanks.
It was possible to do this procedure on an Optiplex 780 without having to use DOS at all! It has a EFI BIOS and lets you change the asset tag in setup I set it to PASS:12/31 and rebooted - then used Ctrl+C as it tried to boot into PXE then got the message 'Manufacturer setup Alt+F' etc. Now its DELLB10K_V2.1 !!!!! awesome.. thanks all