Insert flash. Click P8H61-USB3-ASUS-0602_(command-FLASH)USB-STICK-DOS.exe reboot --> F8 choose USB drive
UNINT32 crashing while trying to open samsung np-n100 bios, pheonix new style bios. can you help on this Andy
HI,Andy sorry my eng killergd00 suggestion 1，在没有RW文件时，软件就自动修改 16D0A23E-C09C-407D-A14A-AD058FDD0CA1-XXX.ROM的ALASKAA M I跟SLIC一致； 1.when user mod bios w/o rw report,auto replace 16D0A23E-C09C-407D-A14A-AD058FDD0CA1-XXX.ROM module "ALASKA AMI" string consistent with the slic 2，在选用模块法修改时，如果不存在4C494E55-5849-5342-4554-544552212121-XXX.ROM时，就自动插入这个模块！ 2a.很多人并不会把自己的主板厂商设置为华硕，因为他的主板确实不是华硕的！ 这时候软件默认为超静二，容易造成黑屏。 2.when user select "module" method,if bios no "4C494E55-5849-5342-4554-544552212121-XXX.ROM" module,auto insert this module. 2a.Many people do not select their motherboard manufacturer "Asus" is set to, because his mobo is not Asus !This time the software defaults to the ssv2, likely to cause a brick 3，不要把修改方式默认为“超静法”，这个容易刷黑！除了可以用动态法的华硕、微星主板，现在软件都默认为超静二 建议其他主板都默认为模块法，如果搜索不到 4C494E55-5849-5342-4554-544552212121_XXX.ROM,软件就自己插入4C494E55-5849-5342-4554 -544552212121模块,这样即使没有SLIC，也不会黑屏！ 3.Do not modify the way the default is "ssv2", this is easy to brick! In addition to using the dynamic method of Asus, MSI board, now software default that "ssv2" Recommend other motherboards default "module" approach, if not search 4C494E55-5849-5342-4554-544552212121_XXX.ROM,Software on their own into the 4C494E55-5849-5342-4554-544552212121 module So even without SLIC, not brick! 这样的话，基本就不用人工干预了。 So, without human intervention rgds qtm
It crashed too. This is what I got when trying on 32bit XP:- View attachment 12399 The only time I heard the Phoenix tool successfully decompressed this BIOS is on the notebook itself, Dell Latitude E6520. I don't have this notebook though. I'm curious why I can't decompressed it on any of my computer.
Which one to use? Andyp, I am still trying to figure this out. Any help would be appreciated. I finally got my P8Z68 motherboard with the UEFI BIOS. I installed Windows 7 and ran the RW-Everything program to produce the ACPI report. I then used this report as input to run your program, version 1.91, and produce a modified BIOS. I have run your program using the following settings: 1. other, dynamic, and the RW report, 2. asus, dynamic, and the RW Report, 3. other, dynamic, using a dummy (empty) RW report, 4. asus, dynamic, and a dummy RW report, and a few other combinations. All of these executions finished successfully and produced a SLIC BIOS. All the results are different from each other and also different from a modified BIOS I downloaded from MDL earlier that supposedly worked. So my question (you can guess) is which one should I try to use? Is it possible that more than one of these modified BIOS files will work? What would be your recommended settings when I have a RW Report available?
Hi Andyp! Sorry my english. Thank you! I just finished the Mod Bios Slic 2.1 to my motherboard: ASUS P8P67 Pro. Bios ver: 2001.