Hi, I hope someone can help me, I have an hp probook 4525s,it will not boot up and black screen,it does power on,the cpu fan & hard drive spins & the cap locks LED is flashing continuously,I have concluded that the cpu & memory are good. Thanks
Manufacturer = Delll Bios = insyde Model = vostro 1200 Bios file name = V1200A09.FD I have query regarding recovery procedure. I have Andy's Phoenix_Mod_Tool_1.42 As you mentioned in the above post how to rename the Bios file using Andy's tool But when i open the Bios file using this tool i dont get info window with the right filename for recovery. Please Help me.
I have the similar problem with magnitude, I use andy's tool but I don't get info with the filename. Can you help me with the recovery file name for mine? Manufacturer: Acer Bios : Insyde/Phoenix Model : Aspire 4750G Bios filename : JE40122.ROM I can't post link to the bios download page yet global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.22_A_A.zip?acerid=634368983260216556&Step1=Notebook&Step2=Aspire&Step3=Aspire%204750G&OS=721&LC=en&BC=Acer&SC=AAP_1
I have seen advices that say the file should be named the first 4 chars of board name (ex 30B9) but here I see it should be whatever stated in Model
i just tried in compaq presario cq40-414tu model to recover the bad flash using usb floppy drive and usb flash drive using key combinatios win+b touch pad blink amper fan runs fast but nothig happen in usb flash drive ...?whypls help me to solve this problem..
For the Aspire 5720 (and also the 5315, 5320, 5715, 7320 and 7720; which are essentially the same machine), what worked for me consistently was burning the file ICL50HW.FD to a blank CD, and using that instead of a USB flash disk or an FDD. It would recognize none of my USB sticks, however, when I used a CD, it worked consistently. ("Consistently", because I had to recover numerous times, as I was working on a BIOS mod.)
-netebook acer emachine em 350(h2o inside bios) - bios BRICK after update - downloaded your tool at this address: hXXp://rghost.net/7590341 - downloaded bios file from this address: hXXp://support.gateway.com/us/en/emac/product/default.aspx - formatted USB key - put into USB files under the dos folder in the downloaded bios - start notebook and press FN-B result: fan 100%, blank screen... HELP me please, thanks for you patience
Hello, it's +1 bricked em350 flashed with 1.9 official bios hxxp://global-download.gateway.com/GDFiles/BIOS/BIOS/BIOS_eMachines_1.09_A_A.zip?acerid=634417321482349799&Step1=NETBOOK&Step2=NETBOOK&Step3=350&OS=ALL&LC=en&BC=EMACHINES&SC=PA_6E tried fn+Esc and USB stick FAT, FAT32 formated, NAV51D2.fd filename. Regards.
the link you posted (with http) return me 404 error , i have another question : i was trying to recover with the 1.9 bios on the usb , is correct? up:tried your method , fan still maxed but he dont beep or do nothing , please you can write complete procedure? , how to set up pen drive? thanks in advance !
I just wanted to report a sucessfully recovery on my Acer Aspire Timeline 5810TZG-414G32MN using JM41X64.fd as filename and FN+Esc Key-Kombo. Details can be found at "Insyde-bios-mod-requests" Thread (i can't link to) using: "p=440484&viewfull=1#post440484" or on "page 680 post #6795" and following.
it's hard, but it's work: hxxp://forums.mydigitallife.net/threads/27029-Help-with-a-Insyde-H2O-BIOS-(eMachines-350-Netbook)/page4?highlight=em350
Acer Travelmate 8371 not working??? Please help me if you can guys. I tried to set up the Acer bio protection thing but I cancelled it. Now it won't let me into the bios nor will it let me finish the system wizard (just loops something on the taskbar, nothing happens) so now I am locked out of the bios asking for a password that I never set. So I updated the bios from v1.28 to the modified version for Vista but it did not remove the bios password. So now I am trying to follow these steps. I am trying to do this on an Acer TravelMate 8371 Using 16GB USB file, formatted to FAT32, renamed the bios to JM31X64.fd as per the instructions from those tools. I tried both Fn + Esc and Winkey + B key but nothing happens. Can anyone give me any help? Thanks a lot.