USB 3/XHCI driver stack for Windows 7

Discussion in 'Windows 7' started by daniel_k, Jun 21, 2020.

  1. datamdl

    datamdl MDL Novice

    Feb 11, 2013
    2
    1
    0
    Thanks daniel_k,
    Maybe this kernel debugger output is helpfull:

    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre

    LAST_CONTROL_TRANSFER: from 8274ef65 to 8279839d

    STACK_TEXT:
    WARNING: Stack unwind information not available. Following frames may be wrong.
    8078b970 8274ef65 85503b7c 8d228bd0 8078b990 UsbHub3!Microsoft_USBD_Compat_Version+0xe8bd
    8078b980 8274eedf 80849cb8 85503ac8 8078b9e8 UsbHub3+0x1f65
    8078b990 819fe543 85503ac8 80849cb8 00000000 UsbHub3+0x1edf
    8078b9e8 819fe17d 84e058b8 80849cb8 80849db8 nt!KeSetProfileIrql+0x11fec
    8078ba54 819f3801 0000000f 80849cb8 8274eec9 nt!KeSetProfileIrql+0x11c26
    8078bad4 81a080fc 8080ac30 00000007 8080ac30 nt!KeSetProfileIrql+0x72aa
    8078bb5c 81a0c369 0080ac30 843eea00 843ee728 nt!TmInitSystem+0x368a
    8078bc3c 817da761 8078bc90 81857582 8080ac30 nt!TmInitSystem+0x78f7
    8078bc44 81857582 8080ac30 491d8eed 00000000 nt!PsSetLegoNotifyRoutine+0x311
    8078bc90 816f4981 817da754 8080ac30 00000000 nt!RtlAnsiStringToUnicodeString+0x258
    00000000 00000000 00000000 00000000 00000000 nt!KeInitializeTimerEx+0x3c9


    FOLLOWUP_IP:
    UsbHub3!Microsoft_USBD_Compat_Version+e8bd
    8279839d a3e0c40400 mov dword ptr ds:[0004C4E0h],eax
     
  2. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    Here is the list of XHCI controllers connected to CPU

    [AMD.NTamd64]
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_10DE&CC_0C0330 ; Nvidia USB-C
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_13ED ; Ariel Type A
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_13EE ; Ariel Type C
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145C ; Family 17h
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145F ; Zeppelin
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_148C ; Starship
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_149C ; Matisse
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15D4 ; FireFligh
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15D5 ; FireFligh
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E0 ; Raven
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E1 ; Raven
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E5 ; Raven2
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_1639 ; Renoir

    Mine is a Matisse CPU so I edited INF like this:

    [Generic.Install.NT]
    CopyFiles=Generic.CopyFiles
    AddProperty=Generic.AddProperty
    ExcludeID=PCI\VEN_1B73&DEV_1000&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1400&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1009&REV_00
    ExcludeID=PCI\VEN_1022&DEV_149C&CC_0C0330

    Integrated New XHCI driver and still stuck at "Setup is Preparing your Computer for first use"
     
  3. daniel_k

    daniel_k MDL Member

    Jan 21, 2019
    157
    242
    10
    @RobrPatty

    Got a better idea.

    Edit the sections below and add only the device ID of the XHCI controller connected to the chipset.
    Replace 0000 with the actual ID.
    Code:
    ;
    ; ---------------------- xHCI Controllers ----------------------
    ;
    [Generic.NTx86.6.0]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_0000
    
    [GenericHub.NTx86.6.0]
    %UsbHub3.RootHubDeviceDesc%=GenericHub.Install, USB\ROOT_HUB30
    %UsbHub3.Usb30HubDesc%=GenericHub.Install, USB\USB30_HUB
    %UsbHub3.Usb20HubDesc%=GenericHub.Install, USB\USB20_HUB
    
    [Generic.NTamd64.6.0]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_0000
    
    [GenericHub.NTamd64.6.0]
    %UsbHub3.RootHubDeviceDesc%=GenericHub.Install, USB\ROOT_HUB30
    %UsbHub3.Usb30HubDesc%=GenericHub.Install, USB\USB30_HUB
    %UsbHub3.Usb20HubDesc%=GenericHub.Install, USB\USB20_HUB
    
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    I don't know what you mean. Don't have Matisse chipset.
     
  5. daniel_k

    daniel_k MDL Member

    Jan 21, 2019
    157
    242
    10
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  6. daniel_k

    daniel_k MDL Member

    Jan 21, 2019
    157
    242
    10
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    #147 RobrPatty, May 18, 2021
    Last edited: May 18, 2021
    Got it with the help of Flash boot

    Activated.png

    More drivers.png CPU-Z.png Drvers.png
     
  8. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
  9. ExtremelyFancyUsername

    ExtremelyFancyUsername MDL Junior Member

    Oct 17, 2018
    94
    22
    0
    Why are you running WS2008R2 on Ryzen anyways?
     
  10. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    It is a special version of Server 2008 R2. Made by and compiled by the 4 friendly horsemen.
     
  11. canonkong

    canonkong MDL Novice

    Jun 26, 2020
    6
    15
    0
    #151 canonkong, May 19, 2021
    Last edited by a moderator: May 21, 2021
    ASUS AMD platforms can not use the win8 port driver with General ID like PCI\CC_0C0330,PCI\VEN_1022&CC_0C0330,or it will freeze on insalling or boot system, even use ExcludeID also can not work.
    The only way is use win8 port driver and not to detected or drive the xhci controllers from CPU.
    So win8 port driver need to edit the ID as this:
    Code:
    [Generic.NTamd64]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_148C1022&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_876B1043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_87CB1043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_88081043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43B9
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BA
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BB
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D0
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D1
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D2
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D3
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D4
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D5
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D6
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D7
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D8
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D9
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DA
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DB
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DD
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DE
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DF
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EE
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EF
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B73&DEV_1100
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_8086&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B21&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B6F&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1033&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1912&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_104C&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1106&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_10DE&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1002&CC_0C0330
    %ACPI\PNP0D10.DeviceDesc%=Generic.Install,ACPI\PNP0D10
    
    For the xhci controllers from CPU, I recommend to use AMD Radeon USB 3.1 drivers v1.0.0.13, it also can work as a universal driver.
    The inf edit as this:
    Code:
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E1
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E0
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_15E5
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145C
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_145F
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_1639
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_148C
    %AMDXHCI.DeviceDesc% = AMDXHCI, PCI\VEN_1022&DEV_149C&SUBSYS_87C01043&REV_00
    
     
  12. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    #152 RobrPatty, May 19, 2021
    Last edited by a moderator: May 21, 2021
    tried this canonkong and did not work. Will try again and post results. Again this did not work. Here is my edited .inf

    Code:
    ;
    ; usbxhci.inf / usbhub3.inf
    ;
    ; Copyright (c) Microsoft Corporation. All rights reserved.
    ;
    
    [Version]
    signature="$Windows NT$"
    Class=USB
    ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    Provider=%Msft%
    DriverVer=05/01/2018,6.2.9200.22453
    CatalogFile=USBXHCI.cat
    
    [SourceDisksNames]
    1="Generic USB xHCI Host Controller"
    
    [SourceDisksFiles]
    usbxhci.sys  = 1
    ucx01000.sys = 1
    usbhub3.sys  = 1
    usbd8.sys = 1
    
    [ControlFlags]
    BasicDriverOk = *
    ExcludeFromSelect = *
    
    [DestinationDirs]
    DefaultDestDir    = 12
    USBXHCI.Copyfiles = 12
    
    [Manufacturer]
    %Generic.Mfg%=Generic,NTx86.6.0,NTamd64.6.0,NTx86.6.2,NTamd64.6.2
    %GenericHub.Mfg%=GenericHub,NTx86.6.0,NTamd64.6.0,NTx86.6.2,NTamd64.6.2
    
    ;
    ; ---------------------- xHCI Controllers ----------------------
    ;
    [Generic.NTx86.6.0]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\CC_0C0330
    %ACPI\PNP0D10.DeviceDesc%=Generic.Install,ACPI\PNP0D10
    
    [GenericHub.NTx86.6.0]
    %UsbHub3.RootHubDeviceDesc%=GenericHub.Install, USB\ROOT_HUB30
    %UsbHub3.Usb30HubDesc%=GenericHub.Install, USB\USB30_HUB
    %UsbHub3.Usb20HubDesc%=GenericHub.Install, USB\USB20_HUB
    
    [Generic.NTamd64]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_148C1022&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_876B1043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_87CB1043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_88081043&REV_00
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43B9
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BA
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BB
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D0
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D1
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D2
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D3
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D4
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D5
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D6
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D7
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D8
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D9
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DA
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DB
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DD
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DE
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DF
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EC
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EE
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EF
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B73&DEV_1100
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_8086&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B21&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1B6F&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1033&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1912&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_104C&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1106&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_10DE&CC_0C0330
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\VEN_1002&CC_0C0330
    %ACPI\PNP0D10.DeviceDesc%=Generic.Install,ACPI\PNP0D10
    
    [Generic.NTx86.6.2]
    [GenericHub.NTx86.6.2]
    [Generic.NTamd64.6.2]
    [GenericHub.NTamd64.6.2]
    [Generic]
    [GenericHub]
    
    [Generic.Install.NT]
    CopyFiles=Generic.CopyFiles
    AddProperty=Generic.AddProperty
    ExcludeID=PCI\VEN_1B73&DEV_1000&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1400&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1009&REV_00
    ExcludeID=PCI\VEN_1022&DEV_149C&CC_0C0330
    
    ;
    ; FeatureScore values between 0x00-0x7F are reserved. Values 0x81-0xFE are for OEMs.
    ;
    FeatureScore=80
    
    [Generic.Install.NT.HW]
    AddReg=Generic_AddReg.HW, PciD3ColdSupported.RegHW
    
    [Generic_AddReg.HW]
    HKR, Interrupt Management,, 0x00000010
    HKR, Interrupt Management\MessageSignaledInterruptProperties,, 0x00000010
    HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported, 0x00010001, 1
    
    [PciD3ColdSupported.RegHW]
    HKR,e5b3b5ac-9725-4f78-963f-03dfb1d828c7,D3ColdSupported,0x10001,1
    
    [Generic.Install.NT.Services]
    AddService=USBXHCI, 2, Generic.AddService
    AddService=UCX01000,,  UCX.AddService
    
    [Generic.AddService]
    DisplayName   = %PCI\CC_0C0330.DeviceDesc%
    ServiceType   = 1
    StartType     = 3
    ErrorControl  = 1
    ServiceBinary = %12%\USBXHCI.SYS
    AddReg        = USBXHCI.AddReg
    
    [USBXHCI.AddReg]
    HKR,, BootFlags,  0x00010001, 4 ; CM_SERVICE_USB3_DISK_BOOT_LOAD
    
    [Generic.CopyFiles]
    UCX01000.SYS
    USBXHCI.SYS
    
    [Generic.AddProperty]
    ; DEVPKEY_Device_DebuggerSafe, DEVPROP_TYPE_UINT32
    {540b947e-8b40-45bc-a8a2-6a0b894cbda2},12,7,,1
    
    [UCX.AddService]
    DisplayName    = "USB Controller Extension"
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\ucx01000.sys
    LoadOrderGroup = Base
    AddReg         = UCX.AddService.AddReg
    
    [UCX.AddService.AddReg]
    HKLM,System\CurrentControlSet\Control\Wdf\Kmdf\Ucx\Versions\1\1,Service,,ucx01000
    HKR,, BootFlags,  0x00010001, 4 ;CM_SERVICE_USB3_DISK_BOOT_LOAD
    
    ;
    [GenericHub.Install.NT]
    CopyFiles=GenericHub.CopyFiles
    AddPowerSetting=USB3.PO1, USB3.PO2
    FeatureScore=0
    
    [GenericHub.Install.NT.Services]
    AddService=USBHUB3, 2, GenericHub.AddService
    
    [GenericHub.AddService]
    DisplayName    = %UsbHub3.SVCDESC%
    ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
    StartType      = 3               ; SERVICE_DEMAND_START
    ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\UsbHub3.sys
    LoadOrderGroup = Base
    AddReg         = ServiceHub_AddReg
    
    [GenericHub.Install.NT.WMI]
    ; Set access permissions for UI WMI GUIDs
    WMIInterface = {4E623B20-CB14-11D1-B331-00A0C959BBD2},,WMIGuidSecurity_AllRights
    WMIInterface = {9C179357-DC7A-4f41-B66B-323B9DDCB5B1},,WMIGuidSecurity_AllReadAdminFul
    WMIInterface = {AD0379E4-72DB-42ed-BA6E-67570479070D},,WMIGuidSecurity_AllReadAdminFul
    WMIInterface = {66C1AA3C-499F-49a0-A9A5-61E2359F6407},,WMIGuidSecurity_AllReadAdminFul
    
    [ServiceHub_AddReg]
    HKR,               , BootFlags,  0x00010001, 4 ; CM_SERVICE_USB3_DISK_BOOT_LOAD
    HKR, Parameters\Wdf, LogPages,   0x00010001, 3 ; KMDF IFR size
    HKR, Parameters,     LogPages,   0x00010001, 3 ; Driver IFR size
    ;
    ; Create a dummy usbhub services key because UxD relies on it.
    ;
    HKLM, SYSTEM\CurrentControlSet\Services\usbhub,,0x00000010
    
    [GenericHub.CopyFiles]
    USBHUB3.SYS
    usbd8.sys
    
    [USB3.PO1]
    SubGroup = %GUID_POWER_USB_SUBGROUP%
    Setting = %GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY%, %USB3LPMPolicyName%, %USB3LPMPolicyDescription%, ,1
    Value= 0, %ValueOff%, %ValueOffDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x0
    Value= 1, %ValueMinimumPowerSavings%, %ValueMinimumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x1
    Value= 2, %ValueModeratePowerSavings%, %ValueModeratePowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x2
    Value= 3, %ValueMaximumPowerSavings%, %ValueMaximumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x3
    
    Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2
    Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 2
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 2
    
    
    [USB3.PO2]
    SubGroup = %GUID_POWER_USB_SUBGROUP%
    Setting = %GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT%, %SelectiveSuspendTimeoutName%, %SelectiveSuspendTimeoutDescription%, ,1
    ValueRange = 1, 100000, 1, %Milisecond%
    
    Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2000
    Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 2000
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 2000
    
    ;
    ; --------------------------- Strings --------------------------
    ;
    [Strings.0405]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Obecný hostitelský řadič USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Hostitelský řadič USB kompatibilní s rozhraním xHCI"
    ACPI\PNP0D10.DeviceDesc="Hostitelský řadič USB kompatibilní s rozhraním xHCI"
    GenericHub.Mfg = "(Standardní rozbočovače USB)"
    UsbHub3.RootHubDeviceDesc = "Kořenový rozbočovač USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Obecný rozbočovač USB SuperSpeed"
    UsbHub3.Usb20HubDesc = "Obecný rozbočovač USB"
    UsbHub3.SVCDESC = "Rozbočovač SuperSpeed"
    
    USB3LPMPolicyName = "Správa napájení odkazů USB 3"
    USB3LPMPolicyDescription = "Určuje zásady správy napájení, které se používají pro odkazy USB 3 při jejich nečinnosti. "
    ValueOff="Vypnuto"
    ValueOffDesc="Nepovolovat stavy U1 U2"
    ValueMinimumPowerSavings = "Minimální úspora energie"
    ValueModeratePowerSavings = "Střední úspora energie"
    ValueMaximumPowerSavings = "Maximální úspora energie"
    ValueMinimumPowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí konzervativní hodnoty pro časové limity z důvodu optimalizace výkonu."
    ValueModeratePowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí optimální hodnoty pro časové limity z důvodu vyvážení spotřeby energie a výkonu."
    ValueMaximumPowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí agresivní hodnoty pro časové limity z důvodu optimalizace spotřeby energie."
    SelectiveSuspendTimeoutName = "Časový limit volitelného pozastavení rozbočovače"
    SelectiveSuspendTimeoutDescription = "Tato hodnota bude použita jako časové limity nečinnosti pro všechny rozbočovače USB."
    Milisecond = "Milisekunda"
    
    [Strings.0406]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generisk USB xHCI-værtscontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel værtscontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel værtscontroller"
    GenericHub.Mfg = "(Standard USB HUB'er)"
    UsbHub3.RootHubDeviceDesc = "USB-rodhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generisk SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generisk USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"
    
    USB3LPMPolicyName = "Strømstyring for USB 3-link"
    USB3LPMPolicyDescription = "Angiver den strømstyringspolitik, der skal bruges for USB 3-links, når de er ledige "
    ValueOff="Fra"
    ValueOffDesc="Aktivér ikke U1 U2-tilstandene"
    ValueMinimumPowerSavings = "Minimum strømbesparelser"
    ValueModeratePowerSavings = "Moderate strømbesparelser"
    ValueMaximumPowerSavings = "Maksimale strømbesparelser"
    ValueMinimumPowerSavingsDesc = "Aktivér U1 U2-tilstandene, men vælg konservative timeoutværdier for at optimere til ydelsen"
    ValueModeratePowerSavingsDesc = "Aktivér U1 U2-tilstandene, og vælg optimale timeoutværdier for at justere mellem strømbesparelse og ydelse"
    ValueMaximumPowerSavingsDesc = "Aktivér U1 U2-tilstandene, og vælg aggressive timeoutværdier for at optimere til strømbesparelse"
    SelectiveSuspendTimeoutName = "Timeout for selektiv hub-afbrydelse"
    SelectiveSuspendTimeoutDescription = "Denne værdi bruges som timoutværdierne for inaktivitet for alle USB-hubs"
    Milisecond = "Millisekund"
    
    [Strings.0407]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generischer USB-xHCI-Hostcontroller"
    PCI\CC_0C0330.DeviceDesc="USB-xHCI-kompatibler Hostcontroller"
    ACPI\PNP0D10.DeviceDesc="USB-xHCI-kompatibler Hostcontroller"
    GenericHub.Mfg = "(Standardmäßige USB-HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB-Root-Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generischer Hochgeschwindigkeits-USB-Hub (SuperSpeed)"
    UsbHub3.Usb20HubDesc = "Generischer USB-Hub"
    UsbHub3.SVCDESC = "Hochgeschwindigkeits-Hub (SuperSpeed)"
    
    USB3LPMPolicyName = "Energieverwaltung für USB 3.0-Verbindungen"
    USB3LPMPolicyDescription = "Gibt die Energieverwaltungsrichtlinie an, die für USB 3.0-Verbindungen im Leerlauf verwendet werden soll. "
    ValueOff="Aus"
    ValueOffDesc="Status U1 und U2 nicht aktivieren"
    ValueMinimumPowerSavings = "Minimale Energieeinsparungen"
    ValueModeratePowerSavings = "Mittlere Energieeinsparungen"
    ValueMaximumPowerSavings = "Maximale Energieeinsparungen"
    ValueMinimumPowerSavingsDesc = "Status U1 und U2 aktivieren, aber zum Optimieren der Leistung konservative Timeoutwerte verwenden."
    ValueModeratePowerSavingsDesc = "Status U1 und U2 aktivieren und zum Ausgleich zwischen Energiebedarf und Leistung optimale Timeoutwerte verwenden."
    ValueMaximumPowerSavingsDesc = "Status U1 und U2 aktivieren und zum Optimieren des Energiebedarfs aggressive Timeoutwerte verwenden."
    SelectiveSuspendTimeoutName = "Zeitlimit für selektives Energiesparen bei Hubs"
    SelectiveSuspendTimeoutDescription = "Dieser Wert dient als Leerlaufzeitlimit für alle UBS-Hubs."
    Milisecond = "Millisekunde"
    
    [Strings.0408]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Γενικός κεντρικός ελεγκτής USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Κεντρικός ελεγκτής συμβατός με USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Κεντρικός ελεγκτής συμβατός με USB xHCI"
    GenericHub.Mfg = "(Τυπικοί διανομείς USB)"
    UsbHub3.RootHubDeviceDesc = "Ριζικός διανομέας USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Γενικός διανομέας SuperSpeed USB"
    UsbHub3.Usb20HubDesc = "Γενικός διανομέας USB"
    UsbHub3.SVCDESC = "Διανομέας SuperSpeed"
    
    USB3LPMPolicyName = "Διαχείριση ενέργειας σύνδεσης USB 3"
    USB3LPMPolicyDescription = "Καθορίζει την πολιτική διαχείρισης ενέργειας για χρήση με τις συνδέσεις USB 3, όταν είναι αδρανείς "
    ValueOff="Απενεργοποίηση"
    ValueOffDesc="Να μην ενεργοποιηθούν οι καταστάσεις U1 U2"
    ValueMinimumPowerSavings = "Ελάχιστη εξοικονόμηση ενέργειας"
    ValueModeratePowerSavings = "Μέτρια εξοικονόμηση ενέργειας"
    ValueMaximumPowerSavings = "Μέγιστη εξοικονόμηση ενέργειας"
    ValueMinimumPowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2, ωστόσο να επιλεγούν συντηρητικές τιμές χρονικού ορίου για τη βελτιστοποίηση των επιδόσεων"
    ValueModeratePowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2 και να επιλεγούν οι βέλτιστες τιμές χρονικού ορίου για την εξισορρόπηση χρήσης ενέργειας και επιδόσεων"
    ValueMaximumPowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2 και να επιλεγούν δυναμικές τιμές χρονικού ορίου για τη βελτιστοποίηση της χρήσης ενέργειας"
    SelectiveSuspendTimeoutName = "Χρονικό όριο επιλεκτικής αναστολής διανομέα"
    SelectiveSuspendTimeoutDescription = "Αυτή η τιμή θα χρησιμοποιηθεί ως το χρονικό όριο αδράνειας για όλους τους διανομείς USB"
    Milisecond = "Χιλιοστό του δευτερολέπτου"
    
    [Strings.0409]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generic USB xHCI Host Controller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Compliant Host Controller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Compliant Host Controller"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"
    
    USB3LPMPolicyName = "USB 3 Link Power Mangement"
    USB3LPMPolicyDescription = "Specifies the power management policy to use for USB 3 links when they are idle "
    ValueOff="Off"
    ValueOffDesc="Do not enable the U1 U2 states"
    ValueMinimumPowerSavings = "Minimum power savings"
    ValueModeratePowerSavings = "Moderate power savings"
    ValueMaximumPowerSavings = "Maximum power savings"
    ValueMinimumPowerSavingsDesc = "Enable the U1 U2 states but choose conservative timeout values to optimize for peformance"
    ValueModeratePowerSavingsDesc = "Enable the U1 U2 states and choose optimal timeout values to balance power and peformance"
    ValueMaximumPowerSavingsDesc = "Enable the U1 U2 states and choose aggressive timeout values to optimize for power"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "This value will be used as idle timeouts for all USB hubs"
    Milisecond = "Milisecond"
    
    [Strings.0C0A]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Controladora de host USB genérico xHCI"
    PCI\CC_0C0330.DeviceDesc="Controladora de host USB genérico compatible con xHCI"
    ACPI\PNP0D10.DeviceDesc="Controladora de host USB genérico compatible con xHCI"
    GenericHub.Mfg = "(Concentradores USB estándar)"
    UsbHub3.RootHubDeviceDesc = "Concentrador raíz USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrador USB genérico de velocidad extra"
    UsbHub3.Usb20HubDesc = "Concentrador USB genérico"
    UsbHub3.SVCDESC = "Concentrador de velocidad extra"
    
    USB3LPMPolicyName = "Vínculo USB 3 para administración de energía"
    USB3LPMPolicyDescription = "Especifica la directiva de administración de energía que se usa para vínculos USB 3 cuando están inactivos "
    ValueOff="Desactivada"
    ValueOffDesc="No habilitar los estados U1 U2"
    ValueMinimumPowerSavings = "Ahorro mínimo de energía"
    ValueModeratePowerSavings = "Ahorro moderado de energía"
    ValueMaximumPowerSavings = "Máximo ahorro de energía"
    ValueMinimumPowerSavingsDesc = "Habilita los estados U1 U2 pero elige valores conservadores de tiempo de espera para optimizar el rendimiento"
    ValueModeratePowerSavingsDesc = "Habilita los estados U1 U2 y elige valores de tiempo de espera óptimos para equilibrar la energía y el rendimiento"
    ValueMaximumPowerSavingsDesc = "Habilita los estados U1 U2 y elige valores de tiempo de espera agresivos para optimizar la energía"
    SelectiveSuspendTimeoutName = "Tiempo de espera de suspensión selectiva de concentrador"
    SelectiveSuspendTimeoutDescription = "Este valor se usará como tiempos de espera de inactividad para todos los concentradores USB"
    Milisecond = "Milisegundo"
    
    [Strings.040B]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Yleinen USB xHCI -isäntäohjain"
    PCI\CC_0C0330.DeviceDesc="USB xHCI -yhteensopiva isäntäohjain"
    ACPI\PNP0D10.DeviceDesc="USB xHCI -yhteensopiva isäntäohjain"
    GenericHub.Mfg = "(USB-vakiokeskittimet)"
    UsbHub3.RootHubDeviceDesc = "USB-pääkeskitin (xHCI)"
    UsbHub3.Usb30HubDesc = "Yleinen SuperSpeed USB -keskitin"
    UsbHub3.Usb20HubDesc = "Yleinen USB-keskitin"
    UsbHub3.SVCDESC = "SuperSpeed-keskitin"
    
    USB3LPMPolicyName = "USB 3 -linkkien virranhallinta"
    USB3LPMPolicyDescription = "Määrittää USB 3 -linkkien käyttämän virranhallinnan, kun ne ovat käyttämättöminä "
    ValueOff="Ei käytössä"
    ValueOffDesc="Älä ota käyttöön U1- ja U2-tiloja"
    ValueMinimumPowerSavings = "Pienin virransäästö"
    ValueModeratePowerSavings = "Kohtuullinen virransäästö"
    ValueMaximumPowerSavings = "Suurin virransäästö"
    ValueMinimumPowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat, mutta valitse kohtuulliset aikakatkaisuarvot suorituskykyyn panostamista varten"
    ValueModeratePowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat ja valitse parhaat mahdolliset aikakatkaisuarvot virrankäytön ja suorituskykyyn tasapainottamista varten"
    ValueMaximumPowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat ja valitse aggressiiviset aikakatkaisuarvot virrankäyttöön panostamista varten"
    SelectiveSuspendTimeoutName = "Keskittimen valikoiva keskeytyksen aikakatkaisu"
    SelectiveSuspendTimeoutDescription = "Tätä arvoa käytetään käyttämättömyyden aikakatkaisuarvona kaikissa USB-keskittimissä"
    Milisecond = "millisekuntia"
    
    [Strings.040C]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Contrôleur d’hôte xHCI USB générique"
    PCI\CC_0C0330.DeviceDesc="Contrôleur d’hôte compatible xHCI USB"
    ACPI\PNP0D10.DeviceDesc="Contrôleur d’hôte compatible xHCI USB"
    GenericHub.Mfg = "(HUB USB standard)"
    UsbHub3.RootHubDeviceDesc = "Concentrateur USB racine (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrateur USB SuperSpeed générique"
    UsbHub3.Usb20HubDesc = "Concentrateur USB générique"
    UsbHub3.SVCDESC = "Concentrateur SuperSpeed"
    
    USB3LPMPolicyName = "Gestion de l’alimentation des liaisons USB 3"
    USB3LPMPolicyDescription = "Spécifie la stratégie de gestion de l’alimentation à utiliser pour les liaisons USB 3 lorsqu’elles sont inactives "
    ValueOff="Désactivé"
    ValueOffDesc="Ne pas activer les états U1 U2"
    ValueMinimumPowerSavings = "Économie d’énergie minimale"
    ValueModeratePowerSavings = "Économie d’énergie modérée"
    ValueMaximumPowerSavings = "Économie d’énergie maximale"
    ValueMinimumPowerSavingsDesc = "Activer les états U1 U2 mais choisir des valeurs de délai d’expiration classiques pour optimiser les performances"
    ValueModeratePowerSavingsDesc = "Activer les états U1 U2 et choisir des valeurs de délai d’expiration optimales pour équilibrer l’alimentation et les performances"
    ValueMaximumPowerSavingsDesc = "Activer les états U1 U2 et choisir des valeurs de délai d’expiration maximales pour optimiser l’alimentation"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "Cette valeur sera utilisée comme délai d’inactivité pour tous les concentrateurs USB"
    Milisecond = "Milliseconde"
    
    [Strings.040E]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Általános USB xHCI állomásvezérlő"
    PCI\CC_0C0330.DeviceDesc="xHCI-kompatibilis USB-állomásvezérlő"
    ACPI\PNP0D10.DeviceDesc="xHCI-kompatibilis USB-állomásvezérlő"
    GenericHub.Mfg = "(Szabványos USB-hubok)"
    UsbHub3.RootHubDeviceDesc = "USB-gyökérhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Általános SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Általános USB hub"
    UsbHub3.SVCDESC = "SuperSpeed hub"
    
    USB3LPMPolicyName = "USB 3 típusú kapcsolat energiagazdálkodása"
    USB3LPMPolicyDescription = "Az USB 3 típusú tétlen kapcsolatokhoz használandó energiagazdálkodási házirendet adja meg. "
    ValueOff="Kikapcsolva"
    ValueOffDesc="Ne legyen engedélyezve az U1 és az U2 állapot"
    ValueMinimumPowerSavings = "Minimális energiamegtakarítás"
    ValueModeratePowerSavings = "Mérsékelt energiamegtakarítás"
    ValueMaximumPowerSavings = "Maximális energiamegtakarítás"
    ValueMinimumPowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, de mérsékelt időtúllépési értékek megadása a teljesítményre való optimalizálás végett."
    ValueModeratePowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, és optimális időtúllépési értékek megadása az energiatakarékosság és a teljesítmény kiegyensúlyozottsága végett."
    ValueMaximumPowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, de agresszív időtúllépési értékek megadása az energiatakarékosságra való optimalizálás végett."
    SelectiveSuspendTimeoutName = "Hub szelektív felfüggesztésének időkorlátja"
    SelectiveSuspendTimeoutDescription = "Minden USB-hubra ez az üresjárati időkorlát vonatkozik"
    Milisecond = "Ezredmásodperc"
    
    [Strings.0410]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Controller host USB xHCI generico"
    PCI\CC_0C0330.DeviceDesc="Controller host USB conforme a xHCI"
    ACPI\PNP0D10.DeviceDesc="Controller host USB conforme a xHCI"
    GenericHub.Mfg = "(HUB USB standard)"
    UsbHub3.RootHubDeviceDesc = "Hub radice USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Hub USB SuperSpeed generico"
    UsbHub3.Usb20HubDesc = "Hub USB generico"
    UsbHub3.SVCDESC = "Hub SuperSpeed"
    
    USB3LPMPolicyName = "Risparmio energia collegamenti USB 3"
    USB3LPMPolicyDescription = "Specifica i criteri di risparmio energia da applicare per i collegamenti USB 3 inattivi "
    ValueOff="Disattivato"
    ValueOffDesc="Non abilitare gli stati U1e U2"
    ValueMinimumPowerSavings = "Risparmio energia minimo"
    ValueModeratePowerSavings = "Risparmio energia moderato"
    ValueMaximumPowerSavings = "Risparmio energia massimo"
    ValueMinimumPowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout prudenti per ottimizzare le prestazioni"
    ValueModeratePowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout ottimali per equilibrare risparmio energia e prestazioni"
    ValueMaximumPowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout aggressivi per ottimizzare il risparmio energia"
    SelectiveSuspendTimeoutName = "Timeout sospensione selettiva hub"
    SelectiveSuspendTimeoutDescription = "Questo valore verrà utilizzato come timeout di inattività per tutti gli hub USB"
    Milisecond = "Millisecondi"
    
    [Strings.0411]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "汎用 USB xHCI ホスト コントローラー"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 対応ホスト コントローラー"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 対応ホスト コントローラー"
    GenericHub.Mfg = "(標準 USB ハブ)"
    UsbHub3.RootHubDeviceDesc = "USB ルート ハブ (xHCI)"
    UsbHub3.Usb30HubDesc = "汎用 SuperSpeed USB ハブ"
    UsbHub3.Usb20HubDesc = "汎用 USB ハブ"
    UsbHub3.SVCDESC = "SuperSpeed ハブ"
    
    USB3LPMPolicyName = "USB 3 リンク電源管理"
    USB3LPMPolicyDescription = "USB 3 リンクがアイドルのときに使用する電源管理ポリシーを指定します "
    ValueOff="オフ"
    ValueOffDesc="U1 U2 状態を無効にします"
    ValueMinimumPowerSavings = "最小限の省電力"
    ValueModeratePowerSavings = "適切な省電力"
    ValueMaximumPowerSavings = "最大限の省電力"
    ValueMinimumPowerSavingsDesc = "U1 U2 状態を有効にしますが、パフォーマンスを最大にするために消極的なタイムアウト値を選択します"
    ValueModeratePowerSavingsDesc = "U1 U2 状態を有効にし、電力とパフォーマンスのバランスを取るために最適なタイムアウト値を選択します"
    ValueMaximumPowerSavingsDesc = "U1 U2 状態を有効にし、電力を最大効率にするために積極的なタイムアウト値を選択します"
    SelectiveSuspendTimeoutName = "ハブのセレクティブ サスペンドのタイムアウト"
    SelectiveSuspendTimeoutDescription = "この値はすべての USB ハブのアイドル タイムアウトとして使用されます"
    Milisecond = "ミリ秒"
    
    [Strings.0412]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "일반 USB xHCI 호스트 컨트롤러"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 규격 호스트 컨트롤러"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 규격 호스트 컨트롤러"
    GenericHub.Mfg = "(표준 USB 허브)"
    UsbHub3.RootHubDeviceDesc = "USB 루트 허브(xHCI)"
    UsbHub3.Usb30HubDesc = "일반 SuperSpeed USB 허브"
    UsbHub3.Usb20HubDesc = "일반 USB 허브"
    UsbHub3.SVCDESC = "SuperSpeed 허브"
    
    USB3LPMPolicyName = "USB 3 연결 전원 관리"
    USB3LPMPolicyDescription = "USB 3 연결이 유휴 상태일 때 사용할 전원 관리 정책을 지정합니다."
    ValueOff="끄기"
    ValueOffDesc="U1 U2 상태를 사용하지 않습니다."
    ValueMinimumPowerSavings = "최소 절전"
    ValueModeratePowerSavings = "보통 수준의 절전"
    ValueMaximumPowerSavings = "최대 절전"
    ValueMinimumPowerSavingsDesc = "U1 U2 상태를 사용하지만 성능 최적화를 위한 무난한 시간 제한 값을 선택합니다."
    ValueModeratePowerSavingsDesc = "U1 U2 상태를 사용하고 전원과 성능 간 균형을 맞추기 위한 최적의 시간 제한 값을 선택합니다."
    ValueMaximumPowerSavingsDesc = "U1 U2 상태를 사용하고 전원 최적화를 위한 공격적인 시간 제한 값을 선택합니다."
    SelectiveSuspendTimeoutName = "허브 선택적 일시 중단 제한 시간"
    SelectiveSuspendTimeoutDescription = "이 값은 모든 USB 허브에 대한 유휴 제한 시간으로 사용됩니다."
    Milisecond = "밀리초"
    
    [Strings.0414]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generisk USB xHCI-vertskontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel vertskontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel vertskontroller"
    GenericHub.Mfg = "(Standard USB-huber)"
    UsbHub3.RootHubDeviceDesc = "USB-rothub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generisk SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generisk USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"
    
    USB3LPMPolicyName = "Strømstyring for USB 3-kobling"
    USB3LPMPolicyDescription = "Angir strømstyringspolicyen som skal brukes for USB 3-koblinger når de er inaktive "
    ValueOff="Av"
    ValueOffDesc="Ikke aktiver U1- og U2-tilstanden"
    ValueMinimumPowerSavings = "Minimale strømsparinger"
    ValueModeratePowerSavings = "Moderate strømsparinger"
    ValueMaximumPowerSavings = "Maksimale strømsparinger"
    ValueMinimumPowerSavingsDesc = "Aktiver U1- og U2-tilstanden, men velg konservative tidsavbruddsverdier for å optimalisere for ytelse"
    ValueModeratePowerSavingsDesc = "Aktiver U1- og U2-tilstanden, og velg optimale tidsavbruddsverdier for å balansere strøm og ytelse"
    ValueMaximumPowerSavingsDesc = "Aktiver U1- og U2-tilstanden, og velg aggressive tidsavbruddsverdier for å optimalisere for ytelse"
    SelectiveSuspendTimeoutName = "Utsatt tidsavbrudd for valgt hub"
    SelectiveSuspendTimeoutDescription = "Denne verdien brukes som inaktive tidsavbrudd for alle USB-huber"
    Milisecond = "Millisekund"
    
    [Strings.0413]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generieke USB xHCI-hostcontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-compatibele hostcontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-compatibele hostcontroller"
    GenericHub.Mfg = "(Standaard USB-HUB's)"
    UsbHub3.RootHubDeviceDesc = "USB-hoofdhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generieke SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generieke USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"
    
    USB3LPMPolicyName = "Energiebeheer voor USB 3-koppelingen"
    USB3LPMPolicyDescription = "Hiermee wordt het energiebeheerbeleid opgegeven dat moet worden gebruikt voor USB 3-koppelingen wanneer deze inactief zijn "
    ValueOff="Uit"
    ValueOffDesc="De U1 U2-statussen niet inschakelen"
    ValueMinimumPowerSavings = "Minimale energiebesparing"
    ValueModeratePowerSavings = "Normale energiebesparing"
    ValueMaximumPowerSavings = "Maximale energiebesparing"
    ValueMinimumPowerSavingsDesc = "Schakel de U1 U2-statussen in, maar kies conservatieve time-outwaarden om de prestaties te optimaliseren"
    ValueModeratePowerSavingsDesc = "Schakel de U1 U2-statussen in en kies optimale time-outwaarden voor een goede balans tussen energie en prestaties"
    ValueMaximumPowerSavingsDesc = "Schakel de U1 U2-statussen in en kies agressieve time-outwaarden voor een optimaal energiegebruik"
    SelectiveSuspendTimeoutName = "Hub Selectieve onderbrekingstime-out"
    SelectiveSuspendTimeoutDescription = "Deze waarde wordt gebruikt als  inactieve time-outs voor alle USB-hubs"
    Milisecond = "Milliseconde"
    
    [Strings.0415]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Rodzajowy kontroler hosta USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Kontroler hosta zgodny z USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Kontroler hosta zgodny z USB xHCI"
    GenericHub.Mfg = "(Standardowe koncentratory USB)"
    UsbHub3.RootHubDeviceDesc = "Główny koncentrator USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Rodzajowy koncentrator USB SuperSpeed"
    UsbHub3.Usb20HubDesc = "Rodzajowy koncentrator USB"
    UsbHub3.SVCDESC = "Koncentrator SuperSpeed"
    
    USB3LPMPolicyName = "Zarządzanie energią dla połączeń USB 3"
    USB3LPMPolicyDescription = "Określa zasady zarządzania energią w przypadku bezczynnych połączeń USB 3 "
    ValueOff="Wyłącz"
    ValueOffDesc="Nie włączaj stanu U1 i U2"
    ValueMinimumPowerSavings = "Minimalny poziom oszczędzania energii"
    ValueModeratePowerSavings = "Średni poziom oszczędzania energii"
    ValueMaximumPowerSavings = "Maksymalny poziom oszczędzania energii"
    ValueMinimumPowerSavingsDesc = "Włącz stan U1 i U2, ale wybierz zachowawcze wartości limitu czasu w celu optymalizacji pod kątem wydajności"
    ValueModeratePowerSavingsDesc = "Włącz stan U1 i U2 oraz wybierz optymalne wartości limitu czasu w celu zrównoważenia wydajności i oszczędności energii"
    ValueMaximumPowerSavingsDesc = "Włącz stan U1 i U2 oraz wybierz agresywne wartości limitu czasu w celu optymalizacji pod kątem oszczędności energii"
    SelectiveSuspendTimeoutName = "Limit czasu selektywnego wstrzymywania koncentratora"
    SelectiveSuspendTimeoutDescription = "Ta wartość będzie używana jako limit czasu bezczynności dla wszystkich koncentratorów USB"
    Milisecond = "Milisekunda"
    
    [Strings.0416]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Controlador Host USB xHCI Genérico"
    PCI\CC_0C0330.DeviceDesc="Controlador Host Compatível com USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Controlador Host Compatível com USB xHCI"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"
    
    USB3LPMPolicyName = "Gerenciamento de Energia de Conexão do USB 3"
    USB3LPMPolicyDescription = "Especifica a política de gerenciamento de energia a ser usada para conexões USB 3, quando estão ociosas "
    ValueOff="Desativada"
    ValueOffDesc="Não habilitar os estados U1 U2"
    ValueMinimumPowerSavings = "Economia de energia mínima"
    ValueModeratePowerSavings = "Economia de energia moderada"
    ValueMaximumPowerSavings = "Economia de energia máxima"
    ValueMinimumPowerSavingsDesc = "Habilite os estados U1 U2, mas escolha valores conservadores de tempo limite para otimizar o desempenho"
    ValueModeratePowerSavingsDesc = "Habilite os estados U1 U2, mas escolha valores ótimos de tempo limite para equilibrar energia e desempenho"
    ValueMaximumPowerSavingsDesc = "Habilite os estados U1 U2 e escolha valores agressivos de tempo limite para otimizar a energia"
    SelectiveSuspendTimeoutName = "Tempo Limite de Suspensão Seletiva do Hub"
    SelectiveSuspendTimeoutDescription = "Este valor será usado como tempo limite ocioso para todos os hubs USB"
    Milisecond = "Milissegundo"
    
    [Strings.0816]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Controlador Anfitrião USB xHCI Genérico"
    PCI\CC_0C0330.DeviceDesc="Controlador Anfitrião Compatível Com USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Controlador Anfitrião Compatível Com USB xHCI"
    GenericHub.Mfg = "(Concentradores USB Padrão)"
    UsbHub3.RootHubDeviceDesc = "Concentrador Raiz USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrador USB SuperSpeed Genérico"
    UsbHub3.Usb20HubDesc = "Concentrador USB Genérico"
    UsbHub3.SVCDESC = "Concentrador SuperSpeed"
    
    USB3LPMPolicyName = "Gestão de Energia de Ligações USB 3"
    USB3LPMPolicyDescription = "Especifica a política de gestão de energia a utilizar para ligações USB 3 quando estão inativas "
    ValueOff="Desligado"
    ValueOffDesc="Não ativar os estados U1 U2"
    ValueMinimumPowerSavings = "Poupança de energia mínima"
    ValueModeratePowerSavings = "Poupança de energia moderada"
    ValueMaximumPowerSavings = "Poupança de energia máxima"
    ValueMinimumPowerSavingsDesc = "Ativar os estados U1 U2, mas escolher valores de tempo limite conservadores para otimização do desempenho"
    ValueModeratePowerSavingsDesc = "Ativar os estados U1 U2 e escolher valores de tempo limite ideais para equilíbrio entre energia e desempenho"
    ValueMaximumPowerSavingsDesc = "Ativar os estados U1 U2 e escolher valores de tempo limite agressivos para otimização da energia"
    SelectiveSuspendTimeoutName = "Tempo Limite da Suspensão Seletiva do Concentrador"
    SelectiveSuspendTimeoutDescription = "Este valor será utilizado como tempos limite inativos para todos os concentradores USB"
    Milisecond = "Milissegundo"
    
    [Strings.0419]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Универсальный хост-контроллер USB xHCI"
    PCI\CC_0C0330.DeviceDesc="xHCI-совместимый хост-контроллер USB"
    ACPI\PNP0D10.DeviceDesc="xHCI-совместимый хост-контроллер USB"
    GenericHub.Mfg = "(Стандартные USB-концентраторы)"
    UsbHub3.RootHubDeviceDesc = "Корневой USB-концентратор (xHCI)"
    UsbHub3.Usb30HubDesc = "Универсальный USB-концентратор SuperSpeed"
    UsbHub3.Usb20HubDesc = "Универсальный USB-концентратор"
    UsbHub3.SVCDESC = "Концентратор SuperSpeed"
    
    USB3LPMPolicyName = "Управления питанием канала USB 3"
    USB3LPMPolicyDescription = "Задает политику управления питанием, которую нужно применять для каналов USB 3, когда они не используются "
    ValueOff="Откл."
    ValueOffDesc="Не включать состояния U1 U2"
    ValueMinimumPowerSavings = "Минимальное энергосбережение"
    ValueModeratePowerSavings = "Умеренное энергосбережение"
    ValueMaximumPowerSavings = "Максимальное энергосбережение"
    ValueMinimumPowerSavingsDesc = "Включить состояния U1 U2, но выбрать консервативные значения времени ожидания для оптимизации производительности"
    ValueModeratePowerSavingsDesc = "Включить состояния U1 U2 и выбрать оптимальные значения времени ожидания для балансировки питания и производительности"
    ValueMaximumPowerSavingsDesc = "Включить состояния U1 U2 и выбрать агрессивные значения времени ожидания для оптимизации питания"
    SelectiveSuspendTimeoutName = "Время ожидания выборочной приостановки концентратора"
    SelectiveSuspendTimeoutDescription = "Это значение будет использоваться в качестве времени ожидания простоев для всех USB-концентраторов"
    Milisecond = "Миллисекунда"
    
    [Strings.041D]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generic USB xHCI-värdstyrenhet"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel värdstyrenhet"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel värdstyrenhet"
    GenericHub.Mfg = "(USB-standardnav)"
    UsbHub3.RootHubDeviceDesc = "USB-rotnav (xHCI)"
    UsbHub3.Usb30HubDesc = "Generiskt SuperSpeed USB-nav"
    UsbHub3.Usb20HubDesc = "Allmänt USB-nav"
    UsbHub3.SVCDESC = "SuperSpeed-nav"
    
    USB3LPMPolicyName = "Energisparfunktioner för USB 3-länkar"
    USB3LPMPolicyDescription = "Anger energisparprincipen som ska användas för USB 3-länkar när de är inaktiva "
    ValueOff="Av"
    ValueOffDesc="Aktivera inte tillstånden U1 och U2"
    ValueMinimumPowerSavings = "Minimalt energisparläge"
    ValueModeratePowerSavings = "Måttligt energisparläge"
    ValueMaximumPowerSavings = "Maximalt energisparläge"
    ValueMinimumPowerSavingsDesc = "Aktivera tillstånden U1 och U2 men välj konservativa timeoutvärden för att optimera prestanda"
    ValueModeratePowerSavingsDesc = "Aktivera tillstånden U1 och U2 och välj optimala timeoutvärden för att balansera strömförbrukning och prestanda"
    ValueMaximumPowerSavingsDesc = "Aktivera tillstånden U1 och U2 och välj aggressiva timeoutvärden för att få minimal strömförbrukning"
    SelectiveSuspendTimeoutName = "Tidsgräns för selektiv paus för nav"
    SelectiveSuspendTimeoutDescription = "Det här värdet används som timeout för inaktivitet för alla USB-nav"
    Milisecond = "Millisekund"
    
    [Strings.041F]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Genel USB xHCI Ana Bilgisayar Denetleyicisi"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Uyumlu Ana Bilgisayar Denetleyicisi"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Uyumlu Ana Bilgisayar Denetleyicisi"
    GenericHub.Mfg = "(Standart USB HUB'ları)"
    UsbHub3.RootHubDeviceDesc = "USB Kök Hub'ı (xHCI)"
    UsbHub3.Usb30HubDesc = "Genel Süper Hızlı USB Hub'ı"
    UsbHub3.Usb20HubDesc = "Genel USB Hub"
    UsbHub3.SVCDESC = "Süper Hızlı Hub"
    
    USB3LPMPolicyName = "USB 3 Bağlantısı Güç Yönetimi"
    USB3LPMPolicyDescription = "Boşta kalan USB 3 bağlantıları için kullanılacak güç yönetimi ilkesini belirtir "
    ValueOff="Kapalı"
    ValueOffDesc="U1 U2 durumlarını etkinleştirme"
    ValueMinimumPowerSavings = "En az güç tasarrufu"
    ValueModeratePowerSavings = "Orta derece güç ayarları"
    ValueMaximumPowerSavings = "En fazla güç tasarrufu"
    ValueMinimumPowerSavingsDesc = "U1 U2 durumlarını etkinleştir ancak performansı en iyi duruma getirmek için ölçülü zaman aşımı değerleri seç"
    ValueModeratePowerSavingsDesc = "U1 U2 durumlarını etkinleştir ve güçle performansı dengelemek için en uygun zaman aşımı değerlerini seç"
    ValueMaximumPowerSavingsDesc = "U1 U2 durumlarını etkinleştir ve gücü en iyi duruma getirmek için sert zaman aşımı değerleri seç"
    SelectiveSuspendTimeoutName = "Hub Seçmeli Askıya Alma Zaman Aşımı"
    SelectiveSuspendTimeoutDescription = "Bu değer tüm USB hub'ları için boşta kalma zaman aşımı olarak kullanılacak"
    Milisecond = "Milisaniye"
    
    [Strings.0804]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "通用 USB xHCI 主机控制器"
    PCI\CC_0C0330.DeviceDesc="符合 USB xHCI 的主机控制器"
    ACPI\PNP0D10.DeviceDesc="符合 USB xHCI 的主机控制器"
    GenericHub.Mfg = "(标准 USB 集线器)"
    UsbHub3.RootHubDeviceDesc = "USB 根集线器(xHCI)"
    UsbHub3.Usb30HubDesc = "通用 SuperSpeed USB 集线器"
    UsbHub3.Usb20HubDesc = "通用 USB 集线器"
    UsbHub3.SVCDESC = "SuperSpeed 集线器"
    
    USB3LPMPolicyName = "USB 3 链路电源管理"
    USB3LPMPolicyDescription = "指定在 USB 3 链路处于空闲状态时使用的电源管理策略 "
    ValueOff="关闭"
    ValueOffDesc="不启用 U1 U2 状态"
    ValueMinimumPowerSavings = "最小能耗节省量"
    ValueModeratePowerSavings = "中等能耗节省量"
    ValueMaximumPowerSavings = "最大能耗节省量"
    ValueMinimumPowerSavingsDesc = "启用 U1 U2 状态,但选择保守超时值以优化性能"
    ValueModeratePowerSavingsDesc = "启用 U1 U2 状态,并选择最佳超时值以平衡能耗和性能"
    ValueMaximumPowerSavingsDesc = "启用 U1 U2 状态,并选择积极超时值以优化能耗"
    SelectiveSuspendTimeoutName = "集线器选择性挂起超时"
    SelectiveSuspendTimeoutDescription = "该值将用作所有 USB 集线器的空闲超时"
    Milisecond = "毫秒"
    
    [Strings.0C04]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "泛型 USB xHCI 主機控制器"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 相容的主機控制器"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 相容的主機控制器"
    GenericHub.Mfg = "(標準的 USB 集線器)"
    UsbHub3.RootHubDeviceDesc = "USB 根集線器 (xHCI)"
    UsbHub3.Usb30HubDesc = "泛型 SuperSpeed USB 集線器"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed 集線器"
    
    USB3LPMPolicyName = "USB 3 連結電源管理"
    USB3LPMPolicyDescription = "指定當 USB 3 連結閒置時要為其使用的電源管理原則"
    ValueOff="關閉"
    ValueOffDesc="不要啟用 U1 U2 狀態"
    ValueMinimumPowerSavings = "低度省電"
    ValueModeratePowerSavings = "中度省電"
    ValueMaximumPowerSavings = "高度省電"
    ValueMinimumPowerSavingsDesc = "啟用 U1 U2 狀態,但選擇保守性逾時值以最佳化效能"
    ValueModeratePowerSavingsDesc = "啟用 U1 U2 狀態並選擇最佳化的逾時值以平衡電源與效率"
    ValueMaximumPowerSavingsDesc = "啟用 U1 U2 狀態並選擇積極性逾時值以最佳化電源使用"
    SelectiveSuspendTimeoutName = "集線器選擇性暫停逾時"
    SelectiveSuspendTimeoutDescription = "此值將用來作為所有 USB 集線器的閒置逾時"
    Milisecond = "毫秒"
    
    [Strings]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"
    
    ;Localizable
    Generic.Mfg = "Generic USB xHCI Host Controller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Compliant Host Controller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Compliant Host Controller"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"
    
    USB3LPMPolicyName = "USB 3 Link Power Mangement"
    USB3LPMPolicyDescription = "Specifies the power management policy to use for USB 3 links when they are idle "
    ValueOff="Off"
    ValueOffDesc="Do not enable the U1 U2 states"
    ValueMinimumPowerSavings = "Minimum power savings"
    ValueModeratePowerSavings = "Moderate power savings"
    ValueMaximumPowerSavings = "Maximum power savings"
    ValueMinimumPowerSavingsDesc = "Enable the U1 U2 states but choose conservative timeout values to optimize for peformance"
    ValueModeratePowerSavingsDesc = "Enable the U1 U2 states and choose optimal timeout values to balance power and peformance"
    ValueMaximumPowerSavingsDesc = "Enable the U1 U2 states and choose aggressive timeout values to optimize for power"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "This value will be used as idle timeouts for all USB hubs"
    
     
  13. canonkong

    canonkong MDL Novice

    Jun 26, 2020
    6
    15
    0
    Not need this line :ExcludeID=PCI\VEN_1022&DEV_149C&CC_0C0330
    Delete it first.
     
  14. canonkong

    canonkong MDL Novice

    Jun 26, 2020
    6
    15
    0
    Also can not include any “PCI\CC_0C0330” words.
    So delete them:
    [Generic.NTx86.6.0]
    %PCI\CC_0C0330.DeviceDesc%=Generic.Install,PCI\CC_0C0330
     
  15. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    So this is what the .INF should look like:

    ;
    ; usbxhci.inf / usbhub3.inf
    ;
    ; Copyright (c) Microsoft Corporation. All rights reserved.
    ;

    [Version]
    signature="$Windows NT$"
    Class=USB
    ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    Provider=%Msft%
    DriverVer=05/01/2018,6.2.9200.22453
    CatalogFile=USBXHCI.cat

    [SourceDisksNames]
    1="Generic USB xHCI Host Controller"

    [SourceDisksFiles]
    usbxhci.sys = 1
    ucx01000.sys = 1
    usbhub3.sys = 1
    usbd8.sys = 1

    [ControlFlags]
    BasicDriverOk = *
    ExcludeFromSelect = *

    [DestinationDirs]
    DefaultDestDir = 12
    USBXHCI.Copyfiles = 12

    [Manufacturer]
    %Generic.Mfg%=Generic,NTx86.6.0,NTamd64.6.0,NTx86.6.2,NTamd64.6.2
    %GenericHub.Mfg%=GenericHub,NTx86.6.0,NTamd64.6.0,NTx86.6.2,NTamd64.6.2

    ;
    ; ---------------------- xHCI Controllers ----------------------
    ;
    [Generic.NTx86.6.0]
    %DeviceDesc%=Generic.Install
    %ACPI\PNP0D10.DeviceDesc%=Generic.Install,ACPI\PNP0D10

    [GenericHub.NTx86.6.0]
    %UsbHub3.RootHubDeviceDesc%=GenericHub.Install, USB\ROOT_HUB30
    %UsbHub3.Usb30HubDesc%=GenericHub.Install, USB\USB30_HUB
    %UsbHub3.Usb20HubDesc%=GenericHub.Install, USB\USB20_HUB

    [Generic.NTamd64]
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_148C1022&REV_00
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_876B1043&REV_00
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_87CB1043&REV_00
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_149C&SUBSYS_88081043&REV_00
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43B9
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BA
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BB
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43BC
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D0
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D1
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D2
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D3
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D4
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D5
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D6
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D7
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D8
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43D9
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DA
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DB
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DC
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DD
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DE
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43DF
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EC
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EE
    %DeviceDesc%=Generic.Install,PCI\VEN_1022&DEV_43EF
    %DeviceDesc%=Generic.Install,PCI\VEN_1B73&DEV_1100
    %DeviceDesc%=Generic.Install,PCI\VEN_8086&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1B21&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1B6F&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1033&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1912&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_104C&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1106&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_10DE&CC_0C0330
    %DeviceDesc%=Generic.Install,PCI\VEN_1002&CC_0C0330
    %ACPI\PNP0D10.DeviceDesc%=Generic.Install,ACPI\PNP0D10

    [Generic.NTx86.6.2]
    [GenericHub.NTx86.6.2]
    [Generic.NTamd64.6.2]
    [GenericHub.NTamd64.6.2]
    [Generic]
    [GenericHub]

    [Generic.Install.NT]
    CopyFiles=Generic.CopyFiles
    AddProperty=Generic.AddProperty
    ExcludeID=PCI\VEN_1B73&DEV_1000&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1400&CC_0C0330
    ExcludeID=PCI\VEN_1B73&DEV_1009&REV_00

    ;
    ; FeatureScore values between 0x00-0x7F are reserved. Values 0x81-0xFE are for OEMs.
    ;
    FeatureScore=80

    [Generic.Install.NT.HW]
    AddReg=Generic_AddReg.HW, PciD3ColdSupported.RegHW

    [Generic_AddReg.HW]
    HKR, Interrupt Management,, 0x00000010
    HKR, Interrupt Management\MessageSignaledInterruptProperties,, 0x00000010
    HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported, 0x00010001, 1

    [PciD3ColdSupported.RegHW]
    HKR,e5b3b5ac-9725-4f78-963f-03dfb1d828c7,D3ColdSupported,0x10001,1

    [Generic.Install.NT.Services]
    AddService=USBXHCI, 2, Generic.AddService
    AddService=UCX01000,, UCX.AddService

    [Generic.AddService]
    DisplayName = %PCI\CC_0C0330.DeviceDesc%
    ServiceType = 1
    StartType = 3
    ErrorControl = 1
    ServiceBinary = %12%\USBXHCI.SYS
    AddReg = USBXHCI.AddReg

    [USBXHCI.AddReg]
    HKR,, BootFlags, 0x00010001, 4 ; CM_SERVICE_USB3_DISK_BOOT_LOAD

    [Generic.CopyFiles]
    UCX01000.SYS
    USBXHCI.SYS

    [Generic.AddProperty]
    ; DEVPKEY_Device_DebuggerSafe, DEVPROP_TYPE_UINT32
    {540b947e-8b40-45bc-a8a2-6a0b894cbda2},12,7,,1

    [UCX.AddService]
    DisplayName = "USB Controller Extension"
    ServiceType = 1 ; SERVICE_KERNEL_DRIVER
    StartType = 3 ; SERVICE_DEMAND_START
    ErrorControl = 1 ; SERVICE_ERROR_NORMAL
    ServiceBinary = %12%\ucx01000.sys
    LoadOrderGroup = Base
    AddReg = UCX.AddService.AddReg

    [UCX.AddService.AddReg]
    HKLM,System\CurrentControlSet\Control\Wdf\Kmdf\Ucx\Versions\1\1,Service,,ucx01000
    HKR,, BootFlags, 0x00010001, 4 ;CM_SERVICE_USB3_DISK_BOOT_LOAD

    ;
    [GenericHub.Install.NT]
    CopyFiles=GenericHub.CopyFiles
    AddPowerSetting=USB3.PO1, USB3.PO2
    FeatureScore=0

    [GenericHub.Install.NT.Services]
    AddService=USBHUB3, 2, GenericHub.AddService

    [GenericHub.AddService]
    DisplayName = %UsbHub3.SVCDESC%
    ServiceType = 1 ; SERVICE_KERNEL_DRIVER
    StartType = 3 ; SERVICE_DEMAND_START
    ErrorControl = 1 ; SERVICE_ERROR_NORMAL
    ServiceBinary = %12%\UsbHub3.sys
    LoadOrderGroup = Base
    AddReg = ServiceHub_AddReg

    [GenericHub.Install.NT.WMI]
    ; Set access permissions for UI WMI GUIDs
    WMIInterface = {4E623B20-CB14-11D1-B331-00A0C959BBD2},,WMIGuidSecurity_AllRights
    WMIInterface = {9C179357-DC7A-4f41-B66B-323B9DDCB5B1},,WMIGuidSecurity_AllReadAdminFul
    WMIInterface = {AD0379E4-72DB-42ed-BA6E-67570479070D},,WMIGuidSecurity_AllReadAdminFul
    WMIInterface = {66C1AA3C-499F-49a0-A9A5-61E2359F6407},,WMIGuidSecurity_AllReadAdminFul

    [ServiceHub_AddReg]
    HKR, , BootFlags, 0x00010001, 4 ; CM_SERVICE_USB3_DISK_BOOT_LOAD
    HKR, Parameters\Wdf, LogPages, 0x00010001, 3 ; KMDF IFR size
    HKR, Parameters, LogPages, 0x00010001, 3 ; Driver IFR size
    ;
    ; Create a dummy usbhub services key because UxD relies on it.
    ;
    HKLM, SYSTEM\CurrentControlSet\Services\usbhub,,0x00000010

    [GenericHub.CopyFiles]
    USBHUB3.SYS
    usbd8.sys

    [USB3.PO1]
    SubGroup = %GUID_POWER_USB_SUBGROUP%
    Setting = %GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY%, %USB3LPMPolicyName%, %USB3LPMPolicyDescription%, ,1
    Value= 0, %ValueOff%, %ValueOffDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x0
    Value= 1, %ValueMinimumPowerSavings%, %ValueMinimumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x1
    Value= 2, %ValueModeratePowerSavings%, %ValueModeratePowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x2
    Value= 3, %ValueMaximumPowerSavings%, %ValueMaximumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x3

    Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2
    Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 2
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 2


    [USB3.PO2]
    SubGroup = %GUID_POWER_USB_SUBGROUP%
    Setting = %GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT%, %SelectiveSuspendTimeoutName%, %SelectiveSuspendTimeoutDescription%, ,1
    ValueRange = 1, 100000, 1, %Milisecond%

    Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2000
    Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 2000
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2000
    Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 2000

    ;
    ; --------------------------- Strings --------------------------
    ;
    [Strings.0405]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Obecný hostitelský řadič USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Hostitelský řadič USB kompatibilní s rozhraním xHCI"
    ACPI\PNP0D10.DeviceDesc="Hostitelský řadič USB kompatibilní s rozhraním xHCI"
    GenericHub.Mfg = "(Standardní rozbočovače USB)"
    UsbHub3.RootHubDeviceDesc = "Kořenový rozbočovač USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Obecný rozbočovač USB SuperSpeed"
    UsbHub3.Usb20HubDesc = "Obecný rozbočovač USB"
    UsbHub3.SVCDESC = "Rozbočovač SuperSpeed"

    USB3LPMPolicyName = "Správa napájení odkazů USB 3"
    USB3LPMPolicyDescription = "Určuje zásady správy napájení, které se používají pro odkazy USB 3 při jejich nečinnosti. "
    ValueOff="Vypnuto"
    ValueOffDesc="Nepovolovat stavy U1 U2"
    ValueMinimumPowerSavings = "Minimální úspora energie"
    ValueModeratePowerSavings = "Střední úspora energie"
    ValueMaximumPowerSavings = "Maximální úspora energie"
    ValueMinimumPowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí konzervativní hodnoty pro časové limity z důvodu optimalizace výkonu."
    ValueModeratePowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí optimální hodnoty pro časové limity z důvodu vyvážení spotřeby energie a výkonu."
    ValueMaximumPowerSavingsDesc = "Povolí stavy U1 U2, ale zvolí agresivní hodnoty pro časové limity z důvodu optimalizace spotřeby energie."
    SelectiveSuspendTimeoutName = "Časový limit volitelného pozastavení rozbočovače"
    SelectiveSuspendTimeoutDescription = "Tato hodnota bude použita jako časové limity nečinnosti pro všechny rozbočovače USB."
    Milisecond = "Milisekunda"

    [Strings.0406]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generisk USB xHCI-værtscontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel værtscontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel værtscontroller"
    GenericHub.Mfg = "(Standard USB HUB'er)"
    UsbHub3.RootHubDeviceDesc = "USB-rodhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generisk SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generisk USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"

    USB3LPMPolicyName = "Strømstyring for USB 3-link"
    USB3LPMPolicyDescription = "Angiver den strømstyringspolitik, der skal bruges for USB 3-links, når de er ledige "
    ValueOff="Fra"
    ValueOffDesc="Aktivér ikke U1 U2-tilstandene"
    ValueMinimumPowerSavings = "Minimum strømbesparelser"
    ValueModeratePowerSavings = "Moderate strømbesparelser"
    ValueMaximumPowerSavings = "Maksimale strømbesparelser"
    ValueMinimumPowerSavingsDesc = "Aktivér U1 U2-tilstandene, men vælg konservative timeoutværdier for at optimere til ydelsen"
    ValueModeratePowerSavingsDesc = "Aktivér U1 U2-tilstandene, og vælg optimale timeoutværdier for at justere mellem strømbesparelse og ydelse"
    ValueMaximumPowerSavingsDesc = "Aktivér U1 U2-tilstandene, og vælg aggressive timeoutværdier for at optimere til strømbesparelse"
    SelectiveSuspendTimeoutName = "Timeout for selektiv hub-afbrydelse"
    SelectiveSuspendTimeoutDescription = "Denne værdi bruges som timoutværdierne for inaktivitet for alle USB-hubs"
    Milisecond = "Millisekund"

    [Strings.0407]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generischer USB-xHCI-Hostcontroller"
    PCI\CC_0C0330.DeviceDesc="USB-xHCI-kompatibler Hostcontroller"
    ACPI\PNP0D10.DeviceDesc="USB-xHCI-kompatibler Hostcontroller"
    GenericHub.Mfg = "(Standardmäßige USB-HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB-Root-Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generischer Hochgeschwindigkeits-USB-Hub (SuperSpeed)"
    UsbHub3.Usb20HubDesc = "Generischer USB-Hub"
    UsbHub3.SVCDESC = "Hochgeschwindigkeits-Hub (SuperSpeed)"

    USB3LPMPolicyName = "Energieverwaltung für USB 3.0-Verbindungen"
    USB3LPMPolicyDescription = "Gibt die Energieverwaltungsrichtlinie an, die für USB 3.0-Verbindungen im Leerlauf verwendet werden soll. "
    ValueOff="Aus"
    ValueOffDesc="Status U1 und U2 nicht aktivieren"
    ValueMinimumPowerSavings = "Minimale Energieeinsparungen"
    ValueModeratePowerSavings = "Mittlere Energieeinsparungen"
    ValueMaximumPowerSavings = "Maximale Energieeinsparungen"
    ValueMinimumPowerSavingsDesc = "Status U1 und U2 aktivieren, aber zum Optimieren der Leistung konservative Timeoutwerte verwenden."
    ValueModeratePowerSavingsDesc = "Status U1 und U2 aktivieren und zum Ausgleich zwischen Energiebedarf und Leistung optimale Timeoutwerte verwenden."
    ValueMaximumPowerSavingsDesc = "Status U1 und U2 aktivieren und zum Optimieren des Energiebedarfs aggressive Timeoutwerte verwenden."
    SelectiveSuspendTimeoutName = "Zeitlimit für selektives Energiesparen bei Hubs"
    SelectiveSuspendTimeoutDescription = "Dieser Wert dient als Leerlaufzeitlimit für alle UBS-Hubs."
    Milisecond = "Millisekunde"

    [Strings.0408]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Γενικός κεντρικός ελεγκτής USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Κεντρικός ελεγκτής συμβατός με USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Κεντρικός ελεγκτής συμβατός με USB xHCI"
    GenericHub.Mfg = "(Τυπικοί διανομείς USB)"
    UsbHub3.RootHubDeviceDesc = "Ριζικός διανομέας USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Γενικός διανομέας SuperSpeed USB"
    UsbHub3.Usb20HubDesc = "Γενικός διανομέας USB"
    UsbHub3.SVCDESC = "Διανομέας SuperSpeed"

    USB3LPMPolicyName = "Διαχείριση ενέργειας σύνδεσης USB 3"
    USB3LPMPolicyDescription = "Καθορίζει την πολιτική διαχείρισης ενέργειας για χρήση με τις συνδέσεις USB 3, όταν είναι αδρανείς "
    ValueOff="Απενεργοποίηση"
    ValueOffDesc="Να μην ενεργοποιηθούν οι καταστάσεις U1 U2"
    ValueMinimumPowerSavings = "Ελάχιστη εξοικονόμηση ενέργειας"
    ValueModeratePowerSavings = "Μέτρια εξοικονόμηση ενέργειας"
    ValueMaximumPowerSavings = "Μέγιστη εξοικονόμηση ενέργειας"
    ValueMinimumPowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2, ωστόσο να επιλεγούν συντηρητικές τιμές χρονικού ορίου για τη βελτιστοποίηση των επιδόσεων"
    ValueModeratePowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2 και να επιλεγούν οι βέλτιστες τιμές χρονικού ορίου για την εξισορρόπηση χρήσης ενέργειας και επιδόσεων"
    ValueMaximumPowerSavingsDesc = "Να ενεργοποιηθούν οι καταστάσεις U1 U2 και να επιλεγούν δυναμικές τιμές χρονικού ορίου για τη βελτιστοποίηση της χρήσης ενέργειας"
    SelectiveSuspendTimeoutName = "Χρονικό όριο επιλεκτικής αναστολής διανομέα"
    SelectiveSuspendTimeoutDescription = "Αυτή η τιμή θα χρησιμοποιηθεί ως το χρονικό όριο αδράνειας για όλους τους διανομείς USB"
    Milisecond = "Χιλιοστό του δευτερολέπτου"

    [Strings.0409]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generic USB xHCI Host Controller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Compliant Host Controller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Compliant Host Controller"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"

    USB3LPMPolicyName = "USB 3 Link Power Mangement"
    USB3LPMPolicyDescription = "Specifies the power management policy to use for USB 3 links when they are idle "
    ValueOff="Off"
    ValueOffDesc="Do not enable the U1 U2 states"
    ValueMinimumPowerSavings = "Minimum power savings"
    ValueModeratePowerSavings = "Moderate power savings"
    ValueMaximumPowerSavings = "Maximum power savings"
    ValueMinimumPowerSavingsDesc = "Enable the U1 U2 states but choose conservative timeout values to optimize for peformance"
    ValueModeratePowerSavingsDesc = "Enable the U1 U2 states and choose optimal timeout values to balance power and peformance"
    ValueMaximumPowerSavingsDesc = "Enable the U1 U2 states and choose aggressive timeout values to optimize for power"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "This value will be used as idle timeouts for all USB hubs"
    Milisecond = "Milisecond"

    [Strings.0C0A]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Controladora de host USB genérico xHCI"
    PCI\CC_0C0330.DeviceDesc="Controladora de host USB genérico compatible con xHCI"
    ACPI\PNP0D10.DeviceDesc="Controladora de host USB genérico compatible con xHCI"
    GenericHub.Mfg = "(Concentradores USB estándar)"
    UsbHub3.RootHubDeviceDesc = "Concentrador raíz USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrador USB genérico de velocidad extra"
    UsbHub3.Usb20HubDesc = "Concentrador USB genérico"
    UsbHub3.SVCDESC = "Concentrador de velocidad extra"

    USB3LPMPolicyName = "Vínculo USB 3 para administración de energía"
    USB3LPMPolicyDescription = "Especifica la directiva de administración de energía que se usa para vínculos USB 3 cuando están inactivos "
    ValueOff="Desactivada"
    ValueOffDesc="No habilitar los estados U1 U2"
    ValueMinimumPowerSavings = "Ahorro mínimo de energía"
    ValueModeratePowerSavings = "Ahorro moderado de energía"
    ValueMaximumPowerSavings = "Máximo ahorro de energía"
    ValueMinimumPowerSavingsDesc = "Habilita los estados U1 U2 pero elige valores conservadores de tiempo de espera para optimizar el rendimiento"
    ValueModeratePowerSavingsDesc = "Habilita los estados U1 U2 y elige valores de tiempo de espera óptimos para equilibrar la energía y el rendimiento"
    ValueMaximumPowerSavingsDesc = "Habilita los estados U1 U2 y elige valores de tiempo de espera agresivos para optimizar la energía"
    SelectiveSuspendTimeoutName = "Tiempo de espera de suspensión selectiva de concentrador"
    SelectiveSuspendTimeoutDescription = "Este valor se usará como tiempos de espera de inactividad para todos los concentradores USB"
    Milisecond = "Milisegundo"

    [Strings.040B]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Yleinen USB xHCI -isäntäohjain"
    PCI\CC_0C0330.DeviceDesc="USB xHCI -yhteensopiva isäntäohjain"
    ACPI\PNP0D10.DeviceDesc="USB xHCI -yhteensopiva isäntäohjain"
    GenericHub.Mfg = "(USB-vakiokeskittimet)"
    UsbHub3.RootHubDeviceDesc = "USB-pääkeskitin (xHCI)"
    UsbHub3.Usb30HubDesc = "Yleinen SuperSpeed USB -keskitin"
    UsbHub3.Usb20HubDesc = "Yleinen USB-keskitin"
    UsbHub3.SVCDESC = "SuperSpeed-keskitin"

    USB3LPMPolicyName = "USB 3 -linkkien virranhallinta"
    USB3LPMPolicyDescription = "Määrittää USB 3 -linkkien käyttämän virranhallinnan, kun ne ovat käyttämättöminä "
    ValueOff="Ei käytössä"
    ValueOffDesc="Älä ota käyttöön U1- ja U2-tiloja"
    ValueMinimumPowerSavings = "Pienin virransäästö"
    ValueModeratePowerSavings = "Kohtuullinen virransäästö"
    ValueMaximumPowerSavings = "Suurin virransäästö"
    ValueMinimumPowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat, mutta valitse kohtuulliset aikakatkaisuarvot suorituskykyyn panostamista varten"
    ValueModeratePowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat ja valitse parhaat mahdolliset aikakatkaisuarvot virrankäytön ja suorituskykyyn tasapainottamista varten"
    ValueMaximumPowerSavingsDesc = "Ota käyttöön U1- ja U2-tilat ja valitse aggressiiviset aikakatkaisuarvot virrankäyttöön panostamista varten"
    SelectiveSuspendTimeoutName = "Keskittimen valikoiva keskeytyksen aikakatkaisu"
    SelectiveSuspendTimeoutDescription = "Tätä arvoa käytetään käyttämättömyyden aikakatkaisuarvona kaikissa USB-keskittimissä"
    Milisecond = "millisekuntia"

    [Strings.040C]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Contrôleur d’hôte xHCI USB générique"
    PCI\CC_0C0330.DeviceDesc="Contrôleur d’hôte compatible xHCI USB"
    ACPI\PNP0D10.DeviceDesc="Contrôleur d’hôte compatible xHCI USB"
    GenericHub.Mfg = "(HUB USB standard)"
    UsbHub3.RootHubDeviceDesc = "Concentrateur USB racine (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrateur USB SuperSpeed générique"
    UsbHub3.Usb20HubDesc = "Concentrateur USB générique"
    UsbHub3.SVCDESC = "Concentrateur SuperSpeed"

    USB3LPMPolicyName = "Gestion de l’alimentation des liaisons USB 3"
    USB3LPMPolicyDescription = "Spécifie la stratégie de gestion de l’alimentation à utiliser pour les liaisons USB 3 lorsqu’elles sont inactives "
    ValueOff="Désactivé"
    ValueOffDesc="Ne pas activer les états U1 U2"
    ValueMinimumPowerSavings = "Économie d’énergie minimale"
    ValueModeratePowerSavings = "Économie d’énergie modérée"
    ValueMaximumPowerSavings = "Économie d’énergie maximale"
    ValueMinimumPowerSavingsDesc = "Activer les états U1 U2 mais choisir des valeurs de délai d’expiration classiques pour optimiser les performances"
    ValueModeratePowerSavingsDesc = "Activer les états U1 U2 et choisir des valeurs de délai d’expiration optimales pour équilibrer l’alimentation et les performances"
    ValueMaximumPowerSavingsDesc = "Activer les états U1 U2 et choisir des valeurs de délai d’expiration maximales pour optimiser l’alimentation"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "Cette valeur sera utilisée comme délai d’inactivité pour tous les concentrateurs USB"
    Milisecond = "Milliseconde"

    [Strings.040E]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Általános USB xHCI állomásvezérlő"
    PCI\CC_0C0330.DeviceDesc="xHCI-kompatibilis USB-állomásvezérlő"
    ACPI\PNP0D10.DeviceDesc="xHCI-kompatibilis USB-állomásvezérlő"
    GenericHub.Mfg = "(Szabványos USB-hubok)"
    UsbHub3.RootHubDeviceDesc = "USB-gyökérhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Általános SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Általános USB hub"
    UsbHub3.SVCDESC = "SuperSpeed hub"

    USB3LPMPolicyName = "USB 3 típusú kapcsolat energiagazdálkodása"
    USB3LPMPolicyDescription = "Az USB 3 típusú tétlen kapcsolatokhoz használandó energiagazdálkodási házirendet adja meg. "
    ValueOff="Kikapcsolva"
    ValueOffDesc="Ne legyen engedélyezve az U1 és az U2 állapot"
    ValueMinimumPowerSavings = "Minimális energiamegtakarítás"
    ValueModeratePowerSavings = "Mérsékelt energiamegtakarítás"
    ValueMaximumPowerSavings = "Maximális energiamegtakarítás"
    ValueMinimumPowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, de mérsékelt időtúllépési értékek megadása a teljesítményre való optimalizálás végett."
    ValueModeratePowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, és optimális időtúllépési értékek megadása az energiatakarékosság és a teljesítmény kiegyensúlyozottsága végett."
    ValueMaximumPowerSavingsDesc = "Az U1 és az U2 állapot engedélyezése, de agresszív időtúllépési értékek megadása az energiatakarékosságra való optimalizálás végett."
    SelectiveSuspendTimeoutName = "Hub szelektív felfüggesztésének időkorlátja"
    SelectiveSuspendTimeoutDescription = "Minden USB-hubra ez az üresjárati időkorlát vonatkozik"
    Milisecond = "Ezredmásodperc"

    [Strings.0410]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Controller host USB xHCI generico"
    PCI\CC_0C0330.DeviceDesc="Controller host USB conforme a xHCI"
    ACPI\PNP0D10.DeviceDesc="Controller host USB conforme a xHCI"
    GenericHub.Mfg = "(HUB USB standard)"
    UsbHub3.RootHubDeviceDesc = "Hub radice USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Hub USB SuperSpeed generico"
    UsbHub3.Usb20HubDesc = "Hub USB generico"
    UsbHub3.SVCDESC = "Hub SuperSpeed"

    USB3LPMPolicyName = "Risparmio energia collegamenti USB 3"
    USB3LPMPolicyDescription = "Specifica i criteri di risparmio energia da applicare per i collegamenti USB 3 inattivi "
    ValueOff="Disattivato"
    ValueOffDesc="Non abilitare gli stati U1e U2"
    ValueMinimumPowerSavings = "Risparmio energia minimo"
    ValueModeratePowerSavings = "Risparmio energia moderato"
    ValueMaximumPowerSavings = "Risparmio energia massimo"
    ValueMinimumPowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout prudenti per ottimizzare le prestazioni"
    ValueModeratePowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout ottimali per equilibrare risparmio energia e prestazioni"
    ValueMaximumPowerSavingsDesc = "Abilita gli stati U1 e U2. Scegli valori di timeout aggressivi per ottimizzare il risparmio energia"
    SelectiveSuspendTimeoutName = "Timeout sospensione selettiva hub"
    SelectiveSuspendTimeoutDescription = "Questo valore verrà utilizzato come timeout di inattività per tutti gli hub USB"
    Milisecond = "Millisecondi"

    [Strings.0411]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "汎用 USB xHCI ホスト コントローラー"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 対応ホスト コントローラー"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 対応ホスト コントローラー"
    GenericHub.Mfg = "(標準 USB ハブ)"
    UsbHub3.RootHubDeviceDesc = "USB ルート ハブ (xHCI)"
    UsbHub3.Usb30HubDesc = "汎用 SuperSpeed USB ハブ"
    UsbHub3.Usb20HubDesc = "汎用 USB ハブ"
    UsbHub3.SVCDESC = "SuperSpeed ハブ"

    USB3LPMPolicyName = "USB 3 リンク電源管理"
    USB3LPMPolicyDescription = "USB 3 リンクがアイドルのときに使用する電源管理ポリシーを指定します "
    ValueOff="オフ"
    ValueOffDesc="U1 U2 状態を無効にします"
    ValueMinimumPowerSavings = "最小限の省電力"
    ValueModeratePowerSavings = "適切な省電力"
    ValueMaximumPowerSavings = "最大限の省電力"
    ValueMinimumPowerSavingsDesc = "U1 U2 状態を有効にしますが、パフォーマンスを最大にするために消極的なタイムアウト値を選択します"
    ValueModeratePowerSavingsDesc = "U1 U2 状態を有効にし、電力とパフォーマンスのバランスを取るために最適なタイムアウト値を選択します"
    ValueMaximumPowerSavingsDesc = "U1 U2 状態を有効にし、電力を最大効率にするために積極的なタイムアウト値を選択します"
    SelectiveSuspendTimeoutName = "ハブのセレクティブ サスペンドのタイムアウト"
    SelectiveSuspendTimeoutDescription = "この値はすべての USB ハブのアイドル タイムアウトとして使用されます"
    Milisecond = "ミリ秒"

    [Strings.0412]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "일반 USB xHCI 호스트 컨트롤러"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 규격 호스트 컨트롤러"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 규격 호스트 컨트롤러"
    GenericHub.Mfg = "(표준 USB 허브)"
    UsbHub3.RootHubDeviceDesc = "USB 루트 허브(xHCI)"
    UsbHub3.Usb30HubDesc = "일반 SuperSpeed USB 허브"
    UsbHub3.Usb20HubDesc = "일반 USB 허브"
    UsbHub3.SVCDESC = "SuperSpeed 허브"

    USB3LPMPolicyName = "USB 3 연결 전원 관리"
    USB3LPMPolicyDescription = "USB 3 연결이 유휴 상태일 때 사용할 전원 관리 정책을 지정합니다."
    ValueOff="끄기"
    ValueOffDesc="U1 U2 상태를 사용하지 않습니다."
    ValueMinimumPowerSavings = "최소 절전"
    ValueModeratePowerSavings = "보통 수준의 절전"
    ValueMaximumPowerSavings = "최대 절전"
    ValueMinimumPowerSavingsDesc = "U1 U2 상태를 사용하지만 성능 최적화를 위한 무난한 시간 제한 값을 선택합니다."
    ValueModeratePowerSavingsDesc = "U1 U2 상태를 사용하고 전원과 성능 간 균형을 맞추기 위한 최적의 시간 제한 값을 선택합니다."
    ValueMaximumPowerSavingsDesc = "U1 U2 상태를 사용하고 전원 최적화를 위한 공격적인 시간 제한 값을 선택합니다."
    SelectiveSuspendTimeoutName = "허브 선택적 일시 중단 제한 시간"
    SelectiveSuspendTimeoutDescription = "이 값은 모든 USB 허브에 대한 유휴 제한 시간으로 사용됩니다."
    Milisecond = "밀리초"

    [Strings.0414]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generisk USB xHCI-vertskontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel vertskontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel vertskontroller"
    GenericHub.Mfg = "(Standard USB-huber)"
    UsbHub3.RootHubDeviceDesc = "USB-rothub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generisk SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generisk USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"

    USB3LPMPolicyName = "Strømstyring for USB 3-kobling"
    USB3LPMPolicyDescription = "Angir strømstyringspolicyen som skal brukes for USB 3-koblinger når de er inaktive "
    ValueOff="Av"
    ValueOffDesc="Ikke aktiver U1- og U2-tilstanden"
    ValueMinimumPowerSavings = "Minimale strømsparinger"
    ValueModeratePowerSavings = "Moderate strømsparinger"
    ValueMaximumPowerSavings = "Maksimale strømsparinger"
    ValueMinimumPowerSavingsDesc = "Aktiver U1- og U2-tilstanden, men velg konservative tidsavbruddsverdier for å optimalisere for ytelse"
    ValueModeratePowerSavingsDesc = "Aktiver U1- og U2-tilstanden, og velg optimale tidsavbruddsverdier for å balansere strøm og ytelse"
    ValueMaximumPowerSavingsDesc = "Aktiver U1- og U2-tilstanden, og velg aggressive tidsavbruddsverdier for å optimalisere for ytelse"
    SelectiveSuspendTimeoutName = "Utsatt tidsavbrudd for valgt hub"
    SelectiveSuspendTimeoutDescription = "Denne verdien brukes som inaktive tidsavbrudd for alle USB-huber"
    Milisecond = "Millisekund"

    [Strings.0413]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generieke USB xHCI-hostcontroller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-compatibele hostcontroller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-compatibele hostcontroller"
    GenericHub.Mfg = "(Standaard USB-HUB's)"
    UsbHub3.RootHubDeviceDesc = "USB-hoofdhub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generieke SuperSpeed USB-hub"
    UsbHub3.Usb20HubDesc = "Generieke USB-hub"
    UsbHub3.SVCDESC = "SuperSpeed-hub"

    USB3LPMPolicyName = "Energiebeheer voor USB 3-koppelingen"
    USB3LPMPolicyDescription = "Hiermee wordt het energiebeheerbeleid opgegeven dat moet worden gebruikt voor USB 3-koppelingen wanneer deze inactief zijn "
    ValueOff="Uit"
    ValueOffDesc="De U1 U2-statussen niet inschakelen"
    ValueMinimumPowerSavings = "Minimale energiebesparing"
    ValueModeratePowerSavings = "Normale energiebesparing"
    ValueMaximumPowerSavings = "Maximale energiebesparing"
    ValueMinimumPowerSavingsDesc = "Schakel de U1 U2-statussen in, maar kies conservatieve time-outwaarden om de prestaties te optimaliseren"
    ValueModeratePowerSavingsDesc = "Schakel de U1 U2-statussen in en kies optimale time-outwaarden voor een goede balans tussen energie en prestaties"
    ValueMaximumPowerSavingsDesc = "Schakel de U1 U2-statussen in en kies agressieve time-outwaarden voor een optimaal energiegebruik"
    SelectiveSuspendTimeoutName = "Hub Selectieve onderbrekingstime-out"
    SelectiveSuspendTimeoutDescription = "Deze waarde wordt gebruikt als inactieve time-outs voor alle USB-hubs"
    Milisecond = "Milliseconde"

    [Strings.0415]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Rodzajowy kontroler hosta USB xHCI"
    PCI\CC_0C0330.DeviceDesc="Kontroler hosta zgodny z USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Kontroler hosta zgodny z USB xHCI"
    GenericHub.Mfg = "(Standardowe koncentratory USB)"
    UsbHub3.RootHubDeviceDesc = "Główny koncentrator USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Rodzajowy koncentrator USB SuperSpeed"
    UsbHub3.Usb20HubDesc = "Rodzajowy koncentrator USB"
    UsbHub3.SVCDESC = "Koncentrator SuperSpeed"

    USB3LPMPolicyName = "Zarządzanie energią dla połączeń USB 3"
    USB3LPMPolicyDescription = "Określa zasady zarządzania energią w przypadku bezczynnych połączeń USB 3 "
    ValueOff="Wyłącz"
    ValueOffDesc="Nie włączaj stanu U1 i U2"
    ValueMinimumPowerSavings = "Minimalny poziom oszczędzania energii"
    ValueModeratePowerSavings = "Średni poziom oszczędzania energii"
    ValueMaximumPowerSavings = "Maksymalny poziom oszczędzania energii"
    ValueMinimumPowerSavingsDesc = "Włącz stan U1 i U2, ale wybierz zachowawcze wartości limitu czasu w celu optymalizacji pod kątem wydajności"
    ValueModeratePowerSavingsDesc = "Włącz stan U1 i U2 oraz wybierz optymalne wartości limitu czasu w celu zrównoważenia wydajności i oszczędności energii"
    ValueMaximumPowerSavingsDesc = "Włącz stan U1 i U2 oraz wybierz agresywne wartości limitu czasu w celu optymalizacji pod kątem oszczędności energii"
    SelectiveSuspendTimeoutName = "Limit czasu selektywnego wstrzymywania koncentratora"
    SelectiveSuspendTimeoutDescription = "Ta wartość będzie używana jako limit czasu bezczynności dla wszystkich koncentratorów USB"
    Milisecond = "Milisekunda"

    [Strings.0416]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Controlador Host USB xHCI Genérico"
    PCI\CC_0C0330.DeviceDesc="Controlador Host Compatível com USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Controlador Host Compatível com USB xHCI"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"

    USB3LPMPolicyName = "Gerenciamento de Energia de Conexão do USB 3"
    USB3LPMPolicyDescription = "Especifica a política de gerenciamento de energia a ser usada para conexões USB 3, quando estão ociosas "
    ValueOff="Desativada"
    ValueOffDesc="Não habilitar os estados U1 U2"
    ValueMinimumPowerSavings = "Economia de energia mínima"
    ValueModeratePowerSavings = "Economia de energia moderada"
    ValueMaximumPowerSavings = "Economia de energia máxima"
    ValueMinimumPowerSavingsDesc = "Habilite os estados U1 U2, mas escolha valores conservadores de tempo limite para otimizar o desempenho"
    ValueModeratePowerSavingsDesc = "Habilite os estados U1 U2, mas escolha valores ótimos de tempo limite para equilibrar energia e desempenho"
    ValueMaximumPowerSavingsDesc = "Habilite os estados U1 U2 e escolha valores agressivos de tempo limite para otimizar a energia"
    SelectiveSuspendTimeoutName = "Tempo Limite de Suspensão Seletiva do Hub"
    SelectiveSuspendTimeoutDescription = "Este valor será usado como tempo limite ocioso para todos os hubs USB"
    Milisecond = "Milissegundo"

    [Strings.0816]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Controlador Anfitrião USB xHCI Genérico"
    PCI\CC_0C0330.DeviceDesc="Controlador Anfitrião Compatível Com USB xHCI"
    ACPI\PNP0D10.DeviceDesc="Controlador Anfitrião Compatível Com USB xHCI"
    GenericHub.Mfg = "(Concentradores USB Padrão)"
    UsbHub3.RootHubDeviceDesc = "Concentrador Raiz USB (xHCI)"
    UsbHub3.Usb30HubDesc = "Concentrador USB SuperSpeed Genérico"
    UsbHub3.Usb20HubDesc = "Concentrador USB Genérico"
    UsbHub3.SVCDESC = "Concentrador SuperSpeed"

    USB3LPMPolicyName = "Gestão de Energia de Ligações USB 3"
    USB3LPMPolicyDescription = "Especifica a política de gestão de energia a utilizar para ligações USB 3 quando estão inativas "
    ValueOff="Desligado"
    ValueOffDesc="Não ativar os estados U1 U2"
    ValueMinimumPowerSavings = "Poupança de energia mínima"
    ValueModeratePowerSavings = "Poupança de energia moderada"
    ValueMaximumPowerSavings = "Poupança de energia máxima"
    ValueMinimumPowerSavingsDesc = "Ativar os estados U1 U2, mas escolher valores de tempo limite conservadores para otimização do desempenho"
    ValueModeratePowerSavingsDesc = "Ativar os estados U1 U2 e escolher valores de tempo limite ideais para equilíbrio entre energia e desempenho"
    ValueMaximumPowerSavingsDesc = "Ativar os estados U1 U2 e escolher valores de tempo limite agressivos para otimização da energia"
    SelectiveSuspendTimeoutName = "Tempo Limite da Suspensão Seletiva do Concentrador"
    SelectiveSuspendTimeoutDescription = "Este valor será utilizado como tempos limite inativos para todos os concentradores USB"
    Milisecond = "Milissegundo"

    [Strings.0419]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Универсальный хост-контроллер USB xHCI"
    PCI\CC_0C0330.DeviceDesc="xHCI-совместимый хост-контроллер USB"
    ACPI\PNP0D10.DeviceDesc="xHCI-совместимый хост-контроллер USB"
    GenericHub.Mfg = "(Стандартные USB-концентраторы)"
    UsbHub3.RootHubDeviceDesc = "Корневой USB-концентратор (xHCI)"
    UsbHub3.Usb30HubDesc = "Универсальный USB-концентратор SuperSpeed"
    UsbHub3.Usb20HubDesc = "Универсальный USB-концентратор"
    UsbHub3.SVCDESC = "Концентратор SuperSpeed"

    USB3LPMPolicyName = "Управления питанием канала USB 3"
    USB3LPMPolicyDescription = "Задает политику управления питанием, которую нужно применять для каналов USB 3, когда они не используются "
    ValueOff="Откл."
    ValueOffDesc="Не включать состояния U1 U2"
    ValueMinimumPowerSavings = "Минимальное энергосбережение"
    ValueModeratePowerSavings = "Умеренное энергосбережение"
    ValueMaximumPowerSavings = "Максимальное энергосбережение"
    ValueMinimumPowerSavingsDesc = "Включить состояния U1 U2, но выбрать консервативные значения времени ожидания для оптимизации производительности"
    ValueModeratePowerSavingsDesc = "Включить состояния U1 U2 и выбрать оптимальные значения времени ожидания для балансировки питания и производительности"
    ValueMaximumPowerSavingsDesc = "Включить состояния U1 U2 и выбрать агрессивные значения времени ожидания для оптимизации питания"
    SelectiveSuspendTimeoutName = "Время ожидания выборочной приостановки концентратора"
    SelectiveSuspendTimeoutDescription = "Это значение будет использоваться в качестве времени ожидания простоев для всех USB-концентраторов"
    Milisecond = "Миллисекунда"

    [Strings.041D]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generic USB xHCI-värdstyrenhet"
    PCI\CC_0C0330.DeviceDesc="USB xHCI-kompatibel värdstyrenhet"
    ACPI\PNP0D10.DeviceDesc="USB xHCI-kompatibel värdstyrenhet"
    GenericHub.Mfg = "(USB-standardnav)"
    UsbHub3.RootHubDeviceDesc = "USB-rotnav (xHCI)"
    UsbHub3.Usb30HubDesc = "Generiskt SuperSpeed USB-nav"
    UsbHub3.Usb20HubDesc = "Allmänt USB-nav"
    UsbHub3.SVCDESC = "SuperSpeed-nav"

    USB3LPMPolicyName = "Energisparfunktioner för USB 3-länkar"
    USB3LPMPolicyDescription = "Anger energisparprincipen som ska användas för USB 3-länkar när de är inaktiva "
    ValueOff="Av"
    ValueOffDesc="Aktivera inte tillstånden U1 och U2"
    ValueMinimumPowerSavings = "Minimalt energisparläge"
    ValueModeratePowerSavings = "Måttligt energisparläge"
    ValueMaximumPowerSavings = "Maximalt energisparläge"
    ValueMinimumPowerSavingsDesc = "Aktivera tillstånden U1 och U2 men välj konservativa timeoutvärden för att optimera prestanda"
    ValueModeratePowerSavingsDesc = "Aktivera tillstånden U1 och U2 och välj optimala timeoutvärden för att balansera strömförbrukning och prestanda"
    ValueMaximumPowerSavingsDesc = "Aktivera tillstånden U1 och U2 och välj aggressiva timeoutvärden för att få minimal strömförbrukning"
    SelectiveSuspendTimeoutName = "Tidsgräns för selektiv paus för nav"
    SelectiveSuspendTimeoutDescription = "Det här värdet används som timeout för inaktivitet för alla USB-nav"
    Milisecond = "Millisekund"

    [Strings.041F]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Genel USB xHCI Ana Bilgisayar Denetleyicisi"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Uyumlu Ana Bilgisayar Denetleyicisi"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Uyumlu Ana Bilgisayar Denetleyicisi"
    GenericHub.Mfg = "(Standart USB HUB'ları)"
    UsbHub3.RootHubDeviceDesc = "USB Kök Hub'ı (xHCI)"
    UsbHub3.Usb30HubDesc = "Genel Süper Hızlı USB Hub'ı"
    UsbHub3.Usb20HubDesc = "Genel USB Hub"
    UsbHub3.SVCDESC = "Süper Hızlı Hub"

    USB3LPMPolicyName = "USB 3 Bağlantısı Güç Yönetimi"
    USB3LPMPolicyDescription = "Boşta kalan USB 3 bağlantıları için kullanılacak güç yönetimi ilkesini belirtir "
    ValueOff="Kapalı"
    ValueOffDesc="U1 U2 durumlarını etkinleştirme"
    ValueMinimumPowerSavings = "En az güç tasarrufu"
    ValueModeratePowerSavings = "Orta derece güç ayarları"
    ValueMaximumPowerSavings = "En fazla güç tasarrufu"
    ValueMinimumPowerSavingsDesc = "U1 U2 durumlarını etkinleştir ancak performansı en iyi duruma getirmek için ölçülü zaman aşımı değerleri seç"
    ValueModeratePowerSavingsDesc = "U1 U2 durumlarını etkinleştir ve güçle performansı dengelemek için en uygun zaman aşımı değerlerini seç"
    ValueMaximumPowerSavingsDesc = "U1 U2 durumlarını etkinleştir ve gücü en iyi duruma getirmek için sert zaman aşımı değerleri seç"
    SelectiveSuspendTimeoutName = "Hub Seçmeli Askıya Alma Zaman Aşımı"
    SelectiveSuspendTimeoutDescription = "Bu değer tüm USB hub'ları için boşta kalma zaman aşımı olarak kullanılacak"
    Milisecond = "Milisaniye"

    [Strings.0804]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "通用 USB xHCI 主机控制器"
    PCI\CC_0C0330.DeviceDesc="符合 USB xHCI 的主机控制器"
    ACPI\PNP0D10.DeviceDesc="符合 USB xHCI 的主机控制器"
    GenericHub.Mfg = "(标准 USB 集线器)"
    UsbHub3.RootHubDeviceDesc = "USB 根集线器(xHCI)"
    UsbHub3.Usb30HubDesc = "通用 SuperSpeed USB 集线器"
    UsbHub3.Usb20HubDesc = "通用 USB 集线器"
    UsbHub3.SVCDESC = "SuperSpeed 集线器"

    USB3LPMPolicyName = "USB 3 链路电源管理"
    USB3LPMPolicyDescription = "指定在 USB 3 链路处于空闲状态时使用的电源管理策略 "
    ValueOff="关闭"
    ValueOffDesc="不启用 U1 U2 状态"
    ValueMinimumPowerSavings = "最小能耗节省量"
    ValueModeratePowerSavings = "中等能耗节省量"
    ValueMaximumPowerSavings = "最大能耗节省量"
    ValueMinimumPowerSavingsDesc = "启用 U1 U2 状态,但选择保守超时值以优化性能"
    ValueModeratePowerSavingsDesc = "启用 U1 U2 状态,并选择最佳超时值以平衡能耗和性能"
    ValueMaximumPowerSavingsDesc = "启用 U1 U2 状态,并选择积极超时值以优化能耗"
    SelectiveSuspendTimeoutName = "集线器选择性挂起超时"
    SelectiveSuspendTimeoutDescription = "该值将用作所有 USB 集线器的空闲超时"
    Milisecond = "毫秒"

    [Strings.0C04]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "泛型 USB xHCI 主機控制器"
    PCI\CC_0C0330.DeviceDesc="USB xHCI 相容的主機控制器"
    ACPI\PNP0D10.DeviceDesc="USB xHCI 相容的主機控制器"
    GenericHub.Mfg = "(標準的 USB 集線器)"
    UsbHub3.RootHubDeviceDesc = "USB 根集線器 (xHCI)"
    UsbHub3.Usb30HubDesc = "泛型 SuperSpeed USB 集線器"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed 集線器"

    USB3LPMPolicyName = "USB 3 連結電源管理"
    USB3LPMPolicyDescription = "指定當 USB 3 連結閒置時要為其使用的電源管理原則"
    ValueOff="關閉"
    ValueOffDesc="不要啟用 U1 U2 狀態"
    ValueMinimumPowerSavings = "低度省電"
    ValueModeratePowerSavings = "中度省電"
    ValueMaximumPowerSavings = "高度省電"
    ValueMinimumPowerSavingsDesc = "啟用 U1 U2 狀態,但選擇保守性逾時值以最佳化效能"
    ValueModeratePowerSavingsDesc = "啟用 U1 U2 狀態並選擇最佳化的逾時值以平衡電源與效率"
    ValueMaximumPowerSavingsDesc = "啟用 U1 U2 狀態並選擇積極性逾時值以最佳化電源使用"
    SelectiveSuspendTimeoutName = "集線器選擇性暫停逾時"
    SelectiveSuspendTimeoutDescription = "此值將用來作為所有 USB 集線器的閒置逾時"
    Milisecond = "毫秒"

    [Strings]
    ;Non-Localizable
    Msft = "Microsoft"
    GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"
    GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"
    GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"
    AC = 0
    DC = 1
    FLG_ADDREG_TYPE_DWORD = 0x00010001
    GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"
    GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"
    GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"

    ;Localizable
    Generic.Mfg = "Generic USB xHCI Host Controller"
    PCI\CC_0C0330.DeviceDesc="USB xHCI Compliant Host Controller"
    ACPI\PNP0D10.DeviceDesc="USB xHCI Compliant Host Controller"
    GenericHub.Mfg = "(Standard USB HUBs)"
    UsbHub3.RootHubDeviceDesc = "USB Root Hub (xHCI)"
    UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"
    UsbHub3.Usb20HubDesc = "Generic USB Hub"
    UsbHub3.SVCDESC = "SuperSpeed Hub"

    USB3LPMPolicyName = "USB 3 Link Power Mangement"
    USB3LPMPolicyDescription = "Specifies the power management policy to use for USB 3 links when they are idle "
    ValueOff="Off"
    ValueOffDesc="Do not enable the U1 U2 states"
    ValueMinimumPowerSavings = "Minimum power savings"
    ValueModeratePowerSavings = "Moderate power savings"
    ValueMaximumPowerSavings = "Maximum power savings"
    ValueMinimumPowerSavingsDesc = "Enable the U1 U2 states but choose conservative timeout values to optimize for peformance"
    ValueModeratePowerSavingsDesc = "Enable the U1 U2 states and choose optimal timeout values to balance power and peformance"
    ValueMaximumPowerSavingsDesc = "Enable the U1 U2 states and choose aggressive timeout values to optimize for power"
    SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"
    SelectiveSuspendTimeoutDescription = "This value will be used as idle timeouts for all USB hubs"
    Milisecond = "Milisecond"
     
  16. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    #156 RobrPatty, May 21, 2021
    Last edited: May 21, 2021
    Your above post #151 shows "PCI\CC_0C0330" words in modded code.
     
  17. canonkong

    canonkong MDL Novice

    Jun 26, 2020
    6
    15
    0
    PCI\CC_0C0330 and PCI\VEN_xxxx&CC_0C0330 are not the same.
    PCI\CC_0C0330 means all usb xhci devices.
    PCI\VEN_xxxx&CC_0C0330 means a manufacturer’s all usb xhci devices.
     
  18. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    So is my .INF in post #155 good?
     
  19. RobrPatty

    RobrPatty MDL Addicted

    Jul 23, 2009
    661
    216
    30
    Then why post "Also can not include any “PCI\CC_0C0330” words.
    So delete them:"
     
  20. canonkong

    canonkong MDL Novice

    Jun 26, 2020
    6
    15
    0
    It is ok now.