anon is down entirely Will update the OP when i got time, MEGA is the only trustworthy mirror atm. Fixed all links at the OP!
Is some thing with the last two monthly version 26100 dl from UUPDump with clean and untouch script all dl no error then used w11boot and upgradefix 6.0 like all other time recomended option 1 and A and after put the iso on usb with latest rufus also untouch, now I can boot from usb but at the the end when I shall press any key to boot from usb it just blinking and dont act when I push any key on the keyboard just like the keyboard is freesed.I include my specs but guess its not that there is the problem because it only happend with the last two monthly version. ps. I can mount the iso and run setup exe and install keep all files and settings, also I can make clean install by keep nothing both way works,but prefer the way with rufus.
Option 1 and A are not options to mix, use either option 1 OR option 2a and 2b. And IoT Enteprise 2024 LTSC doesn't even need any fix, it doesn't enforce the windows 11 system requirements at all by default.
I know I push option 1 like all time and in end of script and this [ A ] Add 22621 autorun.dll to boot.wim and my boot problem exist only the last two month for both IoT Enteprise 2024 LTSC and Enterprise+IoT- pro-work-edu tested them all and same boot problem in the end like my keyboard freese. keyboard works for other thing. going to make a 22621 August version Enterprise disk and test for a boot problem or not. guess the setting is correct because it have all time been working just until now.
Now you know that for all 24H2 IoT editions (normal and ltsc) the check is not done so no fix. Apologies for the misunderstanding about the a but many people mix those two mentioned options or mix rufus skip requirement options with mine. Twice per month I create 24H2 ISOs (2024 LTSC and Home...pro...education...pro-education...upt to enterprise and all boot fine.
Just remember my pcs system/board is quite old 18 + year, so does that means that I run the fix script as it stay recomended and not check any other options.or should I not run the fix tool for the 24H2 iso at all and just put it on my usb with Rufus as I normal do (I never use the option skip requirement all is unticked only use MBR or GPT? thanks for take time replying when you have time hopefully before I make a new disk.
Your CPU supports: EM64T, MMX, SSE, SSE2, SSE3, SSE4.1, SSE4.2, SSSE3, XD It should install fine on that system, i have 2 intel i3 M380 laptops on which 24H2 installs fine, lemme check with the updated IoT Enterprise 2024 LTSC. The stage your install hangs on has nothing to do with the hardware requirements, only cpu/chipset block (both can't be fixed/circumvented) could cause that.
from june-july-and now august I havent been able to boot it from usb so I had to run it from the mounted and make an upgrade or clean install which bot way works with out any problems and if they start blocking legacy chipsets I guess I couldnt do that upgrade by run the setup from the mounted iso?
Rufus does have a replacement bootsector that's used by default. Maybe try without using that special boot sector.
@Carlos can you guide me to how to set rufus up to do that? also I will try the way what Enthousiast sugest but last I tried that it complain that not enough place on an empty fat32 empty disk, I give it a go again once more.
I will also try the way you suggest on formated fat32 usb disk. otherwise if no luck I just make an inplace upgrade with or not keeping all files and setting. I return if need more help not I just dont want giving up.BTW. Guessing its RUFUS give me that problem so I Might go back a rufus version or two when come to that.I want to do the best and easy way to do booting from usb.
You can toggle the Rufus MBR with Alt+A, however, I don't know if it will make a difference in this case.
thanks I TRY, BTW, couldnt extrat the iso image to 16 gb usb using both winrar and 7zip other way I dont know about, also tried mount the iso and copy all to usb but all way it says not enough place on the disk and its full formated fat 32, I try go a few rufus version back and see because I guess its rufus make the problem BUT i,m not expert at all.
resume update Win_11_Boot_And_Upgrade_FiX_KiT_v6.0 my settings on my 18 years old pc iso in iso folder run cmd as admin keeping recomending settings and only press at last the A and 0 for start process used after RUFUS only change to MBR and dont tjek any other setting and press start [ 1 ] {*} AIO 1 : UFWS + setup.cfg (2022/2025) [ 2 ] { } AIO 2a: boot.wim Registry + winsetup.dll [ 3 ] { } AIO 2b: Current OS Registry =================================== Extras =================================== [ 6 ] {*} Replace ISO appraiserres.dll [ 7 ] {*} Integrate Diskpart & Apply Image script [ 8 ] {*} Add the generic EI.CFG file [ 9 ] {*} Optimize boot.wim [ A ] {*} Add 22621 Autorun.dll to 26100 (And higher) Boot.wim (Only use this option when the ISO is already updated!) ============================================================================== ====================== W10UI v10.53r ======================= [1] Target (x64): "O:" [2] Updates: "C:\Users\HP\Desktop\W10UI_10.53r" [3] DISM: "Windows NT 10.0 ADK" [4] Enable .NET 3.5: YES [5] Cleanup System Image: YES [6] Reset Image Base: YES [7] Update WinRE.wim: YES [8] install.wim selected indexes: ALL (2) ============================================================ Change a menu option, press 0 to start the process, or 9 to exitpress 0 and start hope its this is correct setting and its also like that with 17763 ltsc but havent tjek reset base on that Seems it now works as it should. Thanks for all your advice. BTW. I never change anything in script by open cmd from the fix tool from uup dump or w10ui and guess its the right way to go if I have understand it right.
Has anyone used flyby before? When I tried it, it says Windows Server when booting off it even though a used a regular ISO