CMD Admin: Mount: Dism /mount-wim /wimfile:X:\install.wim /index:1 /mountdir:Y:\ Unmount: Dism /unmount-wim /mountdir:Y:\ /discard or /commit
thanks , but i know this cmd is work on windows 7 and windows 8 , but if i use in windows 10.wim it said format not support ..... so i dont know how to do the windows 10.wim in dism , has any other command ?
Get the win10 ADK and make sure to at least download the tools. Install it and it should give you a deployment tools shortcut in your start menu. Run that as admin by right clicking it and selecting the admin option. All win10 servicing should work fine using those tools, even on win7.
i already download windows 10 adk but still same , i found the command : This command is work for it ..... (if i use this command it cant be un-mount the wim file) DISM /Apply-Image /ImageFile:X:\install.wim /Index:1 /ApplyDir:Y:\MOUNT but this command wont work ......(this command work for windows 7 and windows 8 also can unmount the wim file) DISM /Mount-Wim /WimFile:X:\install.wim /Index:1 /MountDir:Y:\ so i dont know what the problem for the command ???
you have to use the deployment tools command prompt shortcut that I mentioned. Having them installed does not make you use them.
i already use it .... cos i also have mount windows 8 in my system ..... it working fine and no problem ..... just windows 10 only got the problem ...
i 100% i use is windows 10 adk .... is not a windows 8 adk .... cos i change my system to windows 10 and use the windows 10 adk , is it need convert to install.esd ?? the iso i download from official website .....
Hello, folks! I am really getting enthusiastic about Windows 10 (integrating into a lot of new computers). I used to do a lot of customizing and slipstreaming on WinXP with nlite and recently I discovered that they have a "new" tool to do 'kind of' the same type of thing for windows 10: NTLITE. I am having wonderful flashbacks of countless hours of work saved (not wasted re-doing the same steps over and over again in new integrated machines) Now, my main doubt that I think you guys can maybe help me here: I did use "WHDownloader" to get the latest Windows 10 update files (Windows10.0-KBnnnnnnn-x64.cab or .msu). I have now: Windows10-x64\Baseline\WU.Satisfy\Windows10.0-KB3074678-x64 Windows10-x64\Baseline\WU.Satisfy\Windows10.0-KB3074686-x64 Windows10-x64\Baseline\Windows10.0-KB3081449-x64 Windows10-x64\Baseline\Windows10.0-KB3081452-x64 Windows10-x64\Security\Windows10.0-KB3087916-x64 and also: Windows10-x64 OLD\Baseline\Windows10.0-KB3081441-x64 Windows10-x64 OLD\Baseline\Windows10.0-KB3081444-x64 On NTLITE all I have to do is to point to an "update" folder and it will read and discover all update files inside the folder and subfolders; in the final process it will automatically load and mount the .wim images, integrate all updates on the list (from oldest to the newest). My question is: Should I integrate the "OLD" 1441 and 1444 as well? (put them on the same folder to be discovered and integrated) Thank you! Any information is quite appreciated.
When I integrated my N LTSB yesterday, I used MSMG Toolkit from the projects forum, Then I did the following. 1. Extract the Toolkit, Then Extract the ISO into the DVD Folder. 2. Right click run toolkit as Admin, Then mount the Source from DVD. 3. Move update(s) KB3081449 (.cab) and KB3081452 (.cab) into the Updates/w10/Custom Folder. 4. Integrate the updates using the Integrate selection, Then choosing Hot fix's/Custom fix's 5. Delete the two KB updates from the Custom folder, Then Re-Add KB3081448 (.cab) into the Custom folder. Now Integrated the last update. 6. Now Apply-Source, Once the image has been saved go to Target and choose Make ISO. Enjoy Note: Keep in mind though when I install Win10 I disconnect my cable modem (i'm still connected to my router though). You cant just unplug the network cable since Enterprise versions need a active network to activate even when using MTK 2.6 BETA 1. Once my Windows is configured to my liking I totally Disable the Windows Update Service then i turn back on the Cable Modem. All my future updates to Windows are done using the dism /online command.
Hello guys, please what concrete tools do you use for sniffing the network traffic of W10 WU? What is the procedure? Can you suggest any approach to reveal traffic for W10 Mobile (connected to LAN via WiFi)? Is the promiscuite mode of NIC needed for that, since traffic will not analysed on the Windows 10 Mobile device directly? Thanks...
Thank You! Thank you, abbodi, big thumbs up for you and all your hard work! (your lists on WHD makes thing really easy for us folks)! Can I possibly ask what is the "WU.Satisfy" supposed to do? I should integrate them as well, right? edit: I can't download the Windows10.0-KB3081448-x64 msu file in any way, shape or form: directly from here --> download windowsupdate com...windows10.0-kb3081448-x64_791bde45376041ecf6791fb2e594d8ca9beab48a.msu or using --> WHDownloader tool or from here --> http ms-vnext net/UpdateArchive/ If anyone could share the file via some other server (like MEGA) it would be greatly appreciated. WHDownloader says: Code: Initializing download... done! Downloading (Baseline) - Cumulative update: August 27, 2015 (KB3081448) (1 of 1)... but it does come to a timeout without downloading anything. It really looks like MS server is blocking me.
Very well explained, thank you! WOW! That really works! Thank you again for your generosity, abbodi! Biiiiiig thumbs up for you!