Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

if this works on my dell inspirion 5577 certainly you've won a grateful follower

 

Took me 9 hours to get it fully complete without any problems.
I still have the same problem i had though. BSOD right at "Starting Windows" Screen saying: Bios not fully ACPI compliant.
I've tried everything, followed all instructions correctly. Just cannot make it work :/
My motherboard model is :
ASUSTeK COMPUTER INC.
Model GL553VD (U3E1).
If someone could help me accomplish this, you'll definetely make my day.
Have a nice day people.

 

Are you getting a stop error code with this BSOD?

 

Yes, I posted a thread below and you can see my updated posts as well.
Shortly:
Finally got the usb and stuff to work,
But I wasn’t able to make a partition big enough (I could like 8gb), so I saved my really important stuff and proceded in the installation after formatting everything. After the install it says: “Windows need to restart to continue the installation”, it restarts and again on the Starting Windows screen half animation I get the BSOD ACPI not fully compliant.
Run the safe mode with cmd and it scans some drivers, reaches windows\system32\drivers\ahcix64s.sys and then BSOD again. Any suggestions? My laptop has no operating system now and I can’t do much.

 

Atak_Snajpera

Thank you very much for the tool ...... and sorry for the way that some people here are talking to you .


Theres definately a problem with the tool somewhere . Sometimes i run it and it works quickly , it makes an iso and a little screen apears that says the job is done .

Other times it gets to a point where it says the job is finished in the log but it doesnt make the iso and the little job finished screen doesnt apear even after waiting all night .

I've got an HPZBook17 with 8 cores at 3.5 GHZ and 32 G of RAM . Its Haswell ......... wich isnt in the thread title ...... but ...... i cant get win 7 on it because i've been told it doesnt have the right drivers in it / in the boot.wim and this tool puts them in the boot.wim ?

If it isnt already possible please can you make it possible to deselect some of the things it puts in like VC , NETFramework and the WUA patch ?

If any members want to point out mistakes i make please can they try to do it without shouting at me . Thanks .

 

Haswell should be no problem for w7, as long as you integrate the USB3.x drivers into boot.wim (both indices to be sure), if you want to boot from an USB3 port (when booted from dvd or usb2 ports it should install without any driver integration) W7 should install normally.

 

Thank you .


Atak_Snajpera

There are errors in the DISM log ...... and after that in the Windows 7 Image Updater log ---- >

dism.log

Code:

2018-08-31 16:00:34, Info                  CSI    00000002 Shim considered [l:320{160}]"\??\E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\pkgmgr.exe" : got STATUS_SUCCESS
2018-08-31 16:00:34, Info                  CBS    Failed to find a matching version for servicing stack: E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\ [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2018-08-31 16:00:34, Info                  CBS    Failed to find servicing stack directory in online store. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2018-08-31 16:00:34, Info                  CBS    Must be doing offline servicing, using stack version from: E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\cbscore.dll


2018-08-31 16:03:22, Info                  CSI    00000002 Shim considered [l:320{160}]"\??\E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\pkgmgr.exe" : got STATUS_SUCCESS
2018-08-31 16:03:22, Info                  CBS    Failed to find a matching version for servicing stack: E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\ [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2018-08-31 16:03:22, Info                  CBS    Failed to find servicing stack directory in online store. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2018-08-31 16:03:22, Info                  CBS    Must be doing offline servicing, using stack version from: E:\Win7\Windows_7_Image_Updater\Mount\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\cbscore.dll


2018-08-31 16:09:36, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 "WIM open failed." - CWimImageInfoCollection::Initialize(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimageinfocollection.cpp:77 - CWimImageInfoCollection::CreateWimImageInfoCollection(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 TID=1188 Failed to create the image info collection. - CWimManager::GetImageInfoCollection(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 TID=1188 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2625 - CWimManager::InternalOpGetImageByIndex(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 TID=1188 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4020 - CWimManager::InternalCmdMount(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 TID=1188 "Error executing command" - CWimManager::InternalExecuteCmd(hr:0x80070003)
2018-08-31 16:09:36, Error                 DISM   DISM WIM Provider: PID=1192 TID=1188 onecore\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2201 - CWimManager::ExecuteCmdLine(hr:0x80070003)
2018-08-31 16:09:36, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.

Windows_7_Image_Updater log.txt

Code:

----------------[ DECOMPRESSING winre.wim ]----------------
[2018-08-31 16:09:36]
[2018-08-31 16:09:36] [ERROR] Can't open "E:\Win7\Windows_7_Image_Updater\Mount\windows\system32\recovery\winre.wim" read-only: No such file or directory
[2018-08-31 16:09:36] ERROR: Exiting with error code 47:
[2018-08-31 16:09:36]        Failed to open a file.

----------------[ install.wim -> Windows 7 Enterprise N -> winre.wim -> Windows Recovery Environment ]----------------
[2018-08-31 16:09:36]
[2018-08-31 16:09:36] Deployment Image Servicing and Management tool
[2018-08-31 16:09:36] Version: 10.0.16299.15
[2018-08-31 16:09:36]
[2018-08-31 16:09:36]
[2018-08-31 16:09:36] Error: 3
[2018-08-31 16:09:36]
[2018-08-31 16:09:36] The system cannot find the path specified.

 

Bingo!! Now have a happier healthier life!!

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

This is what i used ---- > en_windows_7_enterprise_n_with_sp1_x64_dvd_u_677704.iso . It was downloaded from a link on this forum .

I dont know how to open the install wim to look if the winre.wim is in the recovery folder ?

 

You can open install.wim or install.esd using 7zip.

 

yes thats the ones i found and used.But USB3.1 is refusing to integrate.But thats not a problem(until there are only 3.1 ports ).

 

Aren't from kabylake up all usb ports xhci controlled, usb2 and 3.x?

 

Thank you .

In the original install.wim its in Windows\System32\Recovery\winre.wim . But in this one i'm playing with it isnt . There isnt a recovery folder . I'll try to do it all again and see what happens and report back .

 

They are, I think. Most mobos' bioses have an ehci and/or xhci hand-off option for that reason. The maximus vii hero(Z97) has it and it's what you toggle in order to make any usb port work during and after windows 7 installation(assuming the necessary drivers are already integrated).

 

Atak_Snajpera

At foot in mouth

The tool works . I tried it again with just the driver files and then just with the win 10 part . There were no errors in the tool log but the same errors were still in the DISM log .

Maybe / probably i got the install.wims from several experiMENTAL win7 versions mixed up ? Or i did it twice with the same install.wim ?

My problem wasnt with USB ...... it was because my computer came out after win 7 SP 1 . Whatever ...... With your drivers win 7 finally went in with no problems .



Thank you .

 

Hi Atak... so it means the USB will work with Z370?