Can't do it... Installed GogoClient, the bender server pings, but still get 0xC004F074 when trying to activate.
I highly advise those who are using Windows 8 Pro x64 to do the gogo6 method but I will leave that up to you all. Yes you will get a pop saying something like "OS not supported" but to use the app you will need to set compatibility for Win 7 and Run as Admin and app will work. Follow instructions and happy activating
Gogo6 worked here, but I wanted to see about teredo, too, for the future, but nothing I try with it allows me to ping the KMS server or pass test.ipv6.com, two things presumably I should be able to do. I've always shown an IPv6 IP with ipconfig /all. Here's what I've tried based on past posts: 1) Enable UPNP (temporarily) on the router 2) Set appropriate DNS for both Ipv4 and Ipv6 3) Run "netsh interface ipv6 set teredo enterpriseclient" That one's interesting, since the default is "client," and based on "netsh interface ipv6 show teredo" it shows that it's in a "qualified" (i.e. working) state already, so I'm not sure why/if the command is needed but I did it anyway. Am I missing something?
C:\Windows\system32>ping kms-c.no-ip.org Pinging benderrodriguez-1-pt.tunnel.tserv28.waw1.ipv6.he.net [67.215.65.132] wit h 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=50 Reply from 67.215.65.132: bytes=32 time=16ms TTL=50 Reply from 67.215.65.132: bytes=32 time=16ms TTL=50 Reply from 67.215.65.132: bytes=32 time=16ms TTL=50
GUIDE THAT i FIND ON THIS FORUM:ACTIVATION FOR 180 DAYS: 1- go here (gogo6.com/freenet6/registration) and register (need for gogoClient program) 2- then go here (gogo6.com/profile/gogoCLIENT) and download gogoCLIENT - Basic Version 3- run gogoCLIENT and in for Server Address put this: amsterdam.freenet6.net 4- select Connect Using the Following Credentials and enter your User and Pass 5- in Advanced tab select IPv6-in-UDP-IPv4 Tunnel (NAT Traversal) for Tunnel Mode 6- press Apply then press Connect in Basic tab 7- go to Status tab and wait till Tunnel Status shows Connected now if you did everything correct after this command: ping benderrodriguez-1-pt.tunnel.tserv28.waw1.ipv6.he.net you should see ping time. now you can easily active your windows by below commands (remember you should run CMD as Administrator): 1- slmgr /skms benderrodriguez-1-pt.tunnel.tserv28.waw1.ipv6.he.net 2- slmgr /ato NOTE: i already inserted KEY by 7TKMSA 1.4 program i dont know it was needed for Win8 Enterprise or not but you need to enter key for Pro version.
The PCBeta people had also reported success thru the servers : kms-c.no-ip.org:1688 91.149.135.121 91.149.135.83
Yep. Same error: --------------------------- Windows Script Host --------------------------- Activating Windows(R), Professional edition (a98bcd6d-5343-4603-8afe-5908e4611112) ... Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information. --------------------------- OK ---------------------------
To the people using the benderrodriguez address, if you get 0xC04F074 disable wifi and use a wired connection... worked for me anyway