1.ASUSTeK.CMD will do it for you, no worries 2.To remove Starter restrictions, Use ERD 2008 to change the registry value. from [HKEY_LOCAL_MACHINE\SYSTEM\WPA\Starter] "Installed"=dword:00000001 to [HKEY_LOCAL_MACHINE\SYSTEM\WPA\Starter] "Installed"=dword:00000000 Thus, it turns to be a Slim-Home Edition in Starter infrastructure. This method can be applied to those computers unsupported by Starter. Good luck. And thank you again for your ftp server.
xinso, thanks again. one more question. is there any difference between your tool and by inserting oemfiles and slp home key the starter cd. i tried asus oemfiles and a home key. it activated but shows xp home instead of starter edition.
Because you use Home keyset, there's no such registry [HKEY_LOCAL_MACHINE\SYSTEM\WPA\Starter] "Installed"=dword:00000001 the setup process (T29) won't install Starter Components, therefore, you'll get a normal Home Edition down the track. If you want this way to be a success, I think that those old articles about manually install MCE Components would be helpful to you
xinso, finished install use the key from payz with no problem. after apply your tool, error message pops up something like "Computer in a state not support by this version of window..blah..blah" then restart, same message, restart again...
xinso, i changed the registry key to [HKEY_LOCAL_MACHINE\SYSTEM\WPA\Starter] "Installed"=dword:00000000 become more worst. start safe mode with same message. Later will clean re-install, try change the key again, see how it works. thanks again
"safe mode with same message" means the key value was not changed successfully. The value could be changed only from other system, like ERD 2008. So, you need to get an ERD 2008 CD, then boot with this CD, and change the key successfully. Or, from other system on different partition of the same computer where the Starter system is.
no luck what i did -clean install starter edition -start pc with erd 2008 cd -change registry key to [HKEY_LOCAL_MACHINE\SYSTEM\WPA\Starter] "Installed"=dword:00000000 -apply your tool (need to edit your file from regedit to erdregedit) -restart pc same error message it starts up with no problem after fresh install, should not be any hardware issue. pc specification Mobo ASUS F3B-F CPU P3-500 memory PC-133 512MB Display ATI xpert 98 - 8M