WindSLIC UEFI SLIC injector

Hello.

I tried to do the procedure, but always appears as "access denied" here, so I can not copy the file BOOT * for EFI partition. How should I proceed?

Thanks very much.

 

Worked perfectly thank you.

Asus p8p67 deluxe.

 

The laptop will no longer start after using this utility (asus X551MA)... It just freeze in BIOS. I did everything by procedure, no key combo works, not even setup, nothing.

If I let the battery drain completely will this fix it? Or does the CMOS battery last longer? What modifications does this application make?

The laptop is now stuck on the ASUS splash screen and nothing works...bricked totally. If it doesn't flash the BIOS then what could have caused this?

Same problem as him a few pages ago. Please help. It's not even my laptop, I was asked to reinstall Windows on it... I have to fix it somehow

 

Complete newbie here. Be kind

I have a dual boot Windows 7 Ultimate 64 bit and Ubuntu 14.04 system with UEFI. Before using the WindSLIC-UEFI-SLIC-injector, my PC would boot into the GRUB menu where I could see both the systems and choose one. Of course Windows wan't activated at this point of time. So I grabbed the WindSLIC tool and installed the certs - the whole thing went like a charm

Now when I boot the system however, the system boots directly into Windows. Figured out that I had the following entries in the BootLoader:

There are a total of 6 entries listed in the bootloader.


Default: Windows 7
Timeout: 30 seconds
EasyBCD Boot Device: C:\


Entry #1
Name: WindSLIC
BCD ID: {83a75ce3-3b55-11e4-a7e5-806e6f6e6963}
Device: \Device\HarddiskVolume1
Bootloader Path: \EFI\2c9e3c6c9c53fc5634218e87b1479244\BOOTX64.EFI


Entry #2
Name: ubuntu
BCD ID: {ea664f60-3b30-11e4-aba7-806e6f6e6963}
Device: \Device\HarddiskVolume1
Bootloader Path: \EFI\ubuntu\shimx64.efi


Entry #3
Name: CD/DVD Drive
BCD ID: {2ff6926b-3b6c-11e4-9ac8-f968f5b49185}
Device: Unknown
Bootloader Path:


Entry #4
Name: ubuntu
BCD ID: {647de05d-3aff-11e4-9c17-806e6f6e6963}
Device: \Device\HarddiskVolume1
Bootloader Path: \EFI\Ubuntu\grubx64.efi


Entry #5
Name: Hard Drive
BCD ID: {2ff6926c-3b6c-11e4-9ac8-f968f5b49185}
Device: Unknown
Bootloader Path:


Entry #6
Name: Windows 7
BCD ID: {current}
Drive: C:\
Bootloader Path: \Windows\system32\winload.efi


If I select the Entry #2 (shimx64.efi) I get the GRUB menu back but when I boot into Windows, it shows that the copy is not activated!

How can get the GRUB menu as well as boot into an activated Windows?

 

hi Tito,


Thanks for your reply. This might appear really silly, but I could not boot into Windows 7 using the BOOTX64.efi file. The system refused to recognize the path \EFI\2c9e3c6c9c53fc5634218e87b1479244\BOOTX64.EFI which I think is correct. I somehow need to modify the Windows BootLoader but I'm clearly struggling with it. My bad!

Could you please help me with details of the steps required to correct this?

 

You need to login to view this posts content.

 

Hi.

Can anyone help me activate my Windows 7 Ultimate 64-bit step by step? I'm working with a UEFI/GPT system. I tried to follow the steps in one of the forums but it just won't work. I have an HP 14-d007tx laptop, and already installed several programs/software and really would not like to go through all that
reformatting/reintall again.

Personally, I'd like to try the SLIC injector method. I'm not an advanced user so I would really appreciate an easy-to-follow tutorial.

Thanks.

 

MY PC DOESNT REBOOT AFTER USING WINDSLIC - PLEASE HELP ME

i have
Windows 7 ultimate 64 bit not yet activated, in uefi gpt mode
gigabyte ga x99 ud4 mainboard
american megatrends bios version 1ARVYF5

i used the tools like written in the first post, thani restartet my new pc
afterwards i got stuck before i can enter bios, i press del and it says
Entering Setup...
bit nothing happens

i tried to reset bios via jumper and removalof the battery for at least 20 mins,
but the same problem occurs.

what did this patch, that i cant start or reset the bios so that i can start my pc?

plz answer me as soon as possible, i am really upset...

thanks
tobias

 

ater reading more posts, there are two more users with the same problem, gettobg stuck in the splash logo before bios. is there a way to solve this? please help us or give us an idea what this hack does.
is it able to destroy bios?, no one answered the other poor guy. please

 

You need to login to view this posts content.

 

You need to login to view this posts content.

 

how canit be hdd related, when i cant even reach the bios?

what should i change in bios, in case it starts with unplugged hdds?

thanks for answer
tobi

 

Afaik the tool only changes the boot sequence what can be problematic if it fails in a secure boot environment. There are no changes applied to BIOS/UEFI.

In case you have access to BIOS/UEFI change boot sequence to boot from DVD or USB, re-connect the HDD, boot from Install Media and perform a Startup-Repair.

 

Thanks s1ave77.

unplugging the main HDD worked, than i loaded bios default settings, pluged the hdd again and i was able to load.
windows isnt activated though... but i wont do this s**t again... a shame that there is no loader that supports gtp.

thanks for ne fast help

 

I would opt for Pro or Enterprise which can be activated by KMS tools like Microsoft Toolkit .

 

Hi guys. How I can activate my Win 7 Ebterprise on GPT? Sorry for the repeat.

 

Hi ..
any key installer for my "lenovo" laptop windows 7 ultimate 7601 ?