thanks, the MB I developed on is a ASUS P8P67 PRO so in theory it should work. So when you press enter after the SLIC copied to screen nothing happens? frozen?
Yep, once I press enter the final time, the PC is frozen - I have to power cycle it with the power button to recover.
Ok ether it is the scan memory for the SLP1.0 string function, or the make Low memory writable function. try this one, I disabled SLP1.0 injection (kinda useless anyway). If it is the Scan memory function then this one should work, else it will stop again after "Updating RSDP checksum". thanks helping for debug.
It looks like it froze again after Updating RSDP checksum as you mentioned above. This time the lock occurred before clearing the screen, if that makes any difference. Here is a screenshot, in case that helps: View attachment 14957 Thanks again for your help! Edit: I forgot to mention that I also tried this on a fresh install of Win 7 x64 Ultimate (with SP1 included). Other than that, I have not applied any patches by Microsoft.
Thanks, what CPU do you have? Ill have to look at the documentation for the Z68, Z77 chipset. attached is one that should work, tools like SLIC dump tool kit will not find the SLIC but you should activate no problem.
I'm using an i5 2500K CPU on the Z68 chipset. I tried your most recent installer and got mixed results. It allows the system to boot (I double checked my boot order and Windslick is listed first), but unfortunately it doesn't activate Windows. Here's the screenshot: View attachment 14959 Not sure if there is anything else I'm missing however. I double-checked and both the Cert and Key were installed by My Digital Activator.
you installed an ASUS certificate but have an ACER slic, install the ACER certificate or I can post a version with a ASUS slic.
That did the trick. My bad..I should have realized that the CLI version may not have installed the same slic that I had installed a cert for. Thanks for your help and let me know if you need any more help debugging!
Glad to hear it worked, if you could download and run CPU-Z then post the report form the "About" tab I can try to filter out the CPU's that has trouble with WindSLIC.
Hi, I can't get activation...(a second time) I tried to install dualboot Debian/win7 in efi mode. I installed win7(ultimate sp1) in efi with gpt. I ran your script, everything was fine, after reboot, it said activated. I tried to install Debian (wheezy 64bits with Grub-efi) and after a lot of thing, i succeed... but with all the things i have done, it wasn't a clean install... I reinstall win7( during the install process, i errase all partition and partition table, set disk to gpt again)And after this clean install of win7, i couldn't get it activated again... The script seem to be ok, no error...(press key...) I reboot and then black screen. After a reset i enter efi bios and i set windows normal boot and it boot, but not activated... My mainboard is Asus P8H61-M. View attachment 14971 View attachment 14969 View attachment 14970 View attachment 14968 View attachment 14972 thanks for helping, and sorry for my english...