@Jack_90 From where did you download your KMS activator? Link, version etc.... Is it your AV engine that gives you problems? Normally you can remove it by running 1-SppExtComObjPatcher.cmd if you used @abbodi1406 ´s KMS_VL_ALL
It's the MDL version, abbodi's latest one I belive, my CPU clock goes from normal idle speed to about 1.6 GHz and full throttle back and forth, also the os seems quite more "fast and responsive", as if eist and other power saving features can't kick in
Ok, remove it by running 1-SppExtComObjPatcher.cmd if you suspect this cause any problem Spoiler: From readme.txt ================================================================ # Auto Renewal: To install this solution for auto renewal activation, run these scripts respectively: 1-SppExtComObjPatcher.cmd install/uninstall the Patcher Hook. 2-Activate-Local.cmd activate installed supported products (you must run it at least once). you may need to run it again if you installed Office product afterwards. ================================================================ # Manual: To only activate without installing and without renewal, run this script only: KMS_VL_ALL.cmd you will need to run it again before the activation period expire (6 months by default). ================================================================ # Windows 10 KMS 2038: Both KMS_VL_ALL.cmd and Activate-Local.cmd are set by default to check and skip Windows activation if KMS 2038 detected However, if you would like to revert or use normal KMS activation: - edit KMS_VL_ALL.cmd or 2-Activate-Local.cmd with Notepad - change KMS38=1 to zero 0 - save the script, and run it as administrator ================================================================ # Online KMS: You may use Activate-Local.cmd for online activation, if you have valid/trusted external KMS host server. - edit Activate-Local.cmd with Notepad - change KMS_IP=172.16.0.2 to the IP/address of online KMS server - change Online=0 from zero 0 to 1 - save the script, and run it as administrator ================================================================ # Setup Preactivate: - To preactivate the system during installation, copy $oem$ to "sources" folder in the installation media (iso/usb) - If you already use another setupcomplete.cmd, rename this one to KMS_VL_ALL.cmd or similar name then add a command to run it in your setupcomplete.cmd, example: call KMS_VL_ALL.cmd - Use SppExtComObjPatcher.cmd if you want to uninstall the project afterwards. - Note: setupcomplete.cmd is disabled if the default installed key for the edition is OEM Channel ================================================================ # Remarks: - Some security programs will report infected files, that is false-positive due KMS emulating. - Remove any other KMS solutions. Temporary turn off AV security protection. Run as administrator. - If you installed the solution for auto renewal, exclude this file in AV security protection: C:\Windows\system32\SppExtComObjHook.dll ================================================================ # KMS Options for advanced users: You can modify KMS-related options by editing SppExtComObjPatcher.cmd or KMS_VL_ALL.cmd or setupcomplete.cmd - KMS_Emulation Enable embedded KMS Emulator functions never change this option - KMS_RenewalInterval Set interval (minutes) for activated clients to auto renew KMS activation this does not affect the overall KMS period (6 months) allowed values: from 15 to 43200 - KMS_ActivationInterval Set interval (minutes) for products to attempt KMS activation, whether unactivated or failed activation renewal this does not affect the overall KMS period (6 months) allowed values: from 15 to 43200 - KMS_HWID Set custom KMS host Hardware ID hash, 0x prefix is mandatory only affect Windows 8.1/10 - Windows, Office2010, Office2013, Office2016, Office2019 Set custom fixed KMS host ePID for each product, instead generating it randomly ================================================================ # Debug: If the activation failed, you may run the debug mode to help determining the reason move SppExtComObjPatcher-kms folder to a short path with Notepad open/edit KMS_VL_ALL.cmd change the zero 0 to 1 in set _Debug=0 save the script, and run it as administrator wait until command prompt window is closed and Debug.log is created then upload or copy/post the log file Note: this will auto remove SppExtComObjPatcher if it was installed ================================================================ # Supported Volume Products: Windows 7-8-8.1-10 Windows Server 2008R2-2012-2012R2-2016-2019 Office 2010-2013-2016-2019 ================================================================ # Credits: cynecx - SppExtComObj Injector qad - SppExtComObjPatcher Mouri_Naruto - SppExtComObjPatcher-DLL CODYQX4 - KMSEmulator Source MasterDisaster - initial script / WMI methods qewpal - KMS-VL-ALL author abbodi1406 - KMS_VL_ALL-SppExtComObjPatcher-kms author thanks for special assistance: NormieLyfe, Nucleus, Enthousiast, rpo
Which exe shouldn't I block in my firewall if I want office2019 to update itself. Is it just OfficeC2RClient.exe and OfficeClickToRun.exe ?
Could someone help me figure out a page on this topic that has a bunch of downloads for office online installers including several editions? I found it two days ago and I think it was on this topic but I forgot to bookmark
Is there a way to see my retail 2019 ProPlus keys after installation? It is activated and I lost the paper that had the key written on. I would just like to have a hard copy in the file cabinet. Please forgive if this is wrong place for this discussion.
Thank you for the information of Office Tools Plus. Yes, I tried it already and got the same warning on ProjectPlus2019, but not on other Office 2019 components including VisioPro2019. Then I tried Office Tool Lite.exe expecting the result for eliminating this waning on ProjectPro2019. But in vain. Only ProjectPro2019 got the same warning, and I could not get out from this. Do you have any clue for this issue other than using other installation tools. This is the "LICENSE PROBLEM" considering the meaning of "License changed" popps up everytime I launch ProJectPro2019.
YAOCTRI should have installed KMS key by default you may run Check-Activation-Status-Alternative.cmd (from SppExtComObjPatcher-kms pack) to see what's wrong or run this command Code: wmic path SoftwareLicensingProduct where (ApplicationID='0ff1ce15-a989-479d-af46-f275c6370663') get LicenseFamily,PartialProductKey /value