Simplix Pack to update Live Win7 System/ Integrate hotfixes into Win7 distribution

I have Win7 and XP installed on a PC that is working. I purchased a new PC. I restored both partitions to the new PC. I'm getting a BSOD 0x7b on both. I have downloaded the xhciDriverWin7x86 for the new PC. Will Simplix install the driver into an OS that is not running?
I understand Simplix will install the drivers into an ISO file to install the OS from scratch. I have a lot of programs installed in the current build and I'd like to transfer my current os's to the new PC.

Thanks,
Docfxit

 

It's kinda hard to run simplix when the OS won't run. Sounds like you'd be bettter off with simplix integrated into your iso before install. Of course, there are ways to install a driver on a non-working system, which requires something besides simplix.

 

Does anyone know how to install a driver on a non-working system?

Thanks,

Docfxit

 

Boot to safety mode , that will use just a basic set of drivers, then you can copy the drivers to the resource folder where they can be found.


...T

 

Thanks for the reply.

I can't boot into the machine in normal or safe mode. I get a BSOD 0x7b

Thanks,
Docfxit

 

Imma go on a limb and bet on your "restoring the partitions" as a problem. Just perform a clean install and copy over whatever data you need. It's not that much of a hassle.

 

BSOD means clean install like shhnedo says.

Boot with Hiren's cd and copy your data out to a portable, then clean install and copy it back.

We're a long ways away from the topic of the OP which is what I came looking for

...T

 

You need to reset the HAL "Hardware Abstraction Layer" in windows offline (& possibly load current ahci drivers) before you could boot into your OS.
By doing this Windows 7 will re-detect your hardware & not try booting your old config. If you don't, it will blue-screen...
The last time I did it I used "Shadow Protect IT" to reset the HAL. There must be other tools available too...

 

Good morning,

I have been investigating Simplix and what it does etc.
I wanted to download the batch files: Simplix_Batches_Win7.zip - 6 KB as posted in #1100 but my AVG said that it was unsafe. Is it OK to download and save this file or is there a new location in which I can do this please.

Thanks in advance.

 

Thank you Enthousiast, it is appreciated .

 

The availability of the UpdatePack 18.2.18 will be ready in the next days or it need to wait for the next patch days of March.
Regards

 

You need to login to view this posts content.

 

they have one apply-image if you looking in msmg toolkit..first i integrated the updates and last the net 4.7.1 and works fine.go in msmg toolkit in mega link and you will see there is some folders with net 4.7.1

 

if i'm correct you don't put the net 4.7.1 into updates folder, you put it into packs folder. Correct ?

 

yes

 

why do you choose MSMG to integrate updates ? there are other tools here that allow to do this as well as the ones from @abbodi1406 (Win7UI, Win81UI,Win10UI)
Do you have any reason to choose MSMG tool to integrate updates rather than other tools as the ones from @abbodi1406 ? would you say that it's the best tool to integrate updates ? if so, why ?

 

no i said im using the updatepack integrate the updates..i didnt say i used msmg for integrate the updates.

i use updatepack for integrate the updates and msmg for apply net 4.7.1 for windows 7 only.!

 

ok that's what i do as well concerning win7.
what about win8.1 and win10 ? which tool do you use to integrate updates ? MSMG or the ones from @abbodi1406 ? or do you choose to integrate them in audit mode then sysprep as i do ?