XP OEM SLP1.0 "Repair Installation" CD

Discussion in 'Windows XP / Older OS' started by xfilz, Sep 16, 2008.

  1. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    #1 xfilz, Sep 16, 2008
    Last edited: Feb 16, 2009

    Attached Files:

  2. 911medic

    911medic MDL Guru

    Aug 13, 2008
    5,772
    504
    180
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    #3 xfilz, Feb 14, 2009
    Last edited: Apr 1, 2009
    (OP)
    1. No need for VOL CD, unless you have a VOL CD, from work? And want change it to OEM CD. Anyway --> 04-21-2008, 05:35 PM I got this question:
    2.Simply because a VOL cd with an OEM .CA_, very often results in errors and you can not complete your installation. See the above error description.
    3.Additional Attachements for you below. Thanks to all authors 4 hard work. With your Tech knowledge maybe the .CA_ issue can be explained further?
     

    Attached Files:

  4. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
  5. colinzim

    colinzim MDL Senior Member

    May 14, 2007
    461
    114
    10
    Working A1

    Followed instructions in 1st post and works perfectly.
    VLK to OEM
    Congrads & Thanks !
     
  6. XcopyBR

    XcopyBR MDL Member

    Apr 25, 2008
    176
    2
    10
    Oh man, I wish I had seen this earlier this month!
     
  7. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
  8. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    #9 xfilz, Apr 1, 2009
    Last edited: Apr 1, 2009
    (OP)
    Yes, thats all you need to do, but u must be sure to have correct oembios files for ur system, then u are all fine. be sure to run oembios.exe first to make sure your system can be preactivated. it converts ur system to an oem system with oem serial key, and copies oem pidgen and dpcdll thats included. make sure u place the .exe in same folder that you have the oembios files that can activate ur system. never ever use it alone without correct oembios files, then u will be prompted to activate at reboot. please read about slp1.0 activation before running my tools. feedback will be nice for others to read.

    xfilz
    :)
     
  9. pbgbottle

    pbgbottle MDL Member

    Mar 7, 2008
    140
    2
    10
    sounds good i will report back .i did run it the first time by itself . it did change the info and the key but i did not have it in a folder with the oem files.then i reread abit more and placed the exe in the folder with oem files and then re-ran the tool .we'll find out on reboot . i won't be rebooting for about 3 hours Doh!
    i do have the slp 1 dell info in the bios do i need to run it with the full oem files (9 files) or just the (4 files download.) i used the 4 file download from oembios.net

    cheers .
     
  10. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    #11 xfilz, Apr 1, 2009
    Last edited: Apr 1, 2009
    (OP)
    You only need the 4 files from oembios.net and OEMBIOS_restoration.exe, ive done it like this manually for a long time, it should work for you also;)

    xfilz
    :)
     
  11. pbgbottle

    pbgbottle MDL Member

    Mar 7, 2008
    140
    2
    10
    all is good i just rebooted ran oobe/msoobe /a says all is activated tryed to download directx tested for genuine passed thank you very much simple and easy utility

    cheers ;)
     
  12. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    cool, thank you for feedback, just like you were a bit worried before reboot i bet many others also was a bit scared trying it.
    nice to be able to help out, its so much easier than reinstalling or doing a repair install doing it this way saves u the work.

    cheers
    :)
     
  13. pbgbottle

    pbgbottle MDL Member

    Mar 7, 2008
    140
    2
    10
    Xfils just wanted to let ya no i had to use your utility a few more times i requested a different modded bios and used your program again to change from Dell oem to HP oem and finally Asus oem wow! . all went smooth .as long as i flashed my bios during the reboot to match the proper OEM files upon boot up the machine was always activated .
    cheers

    i also put my buddy onto your little program and he has since used it on 3 of his machines . all converted from VOL to OEM no problems

    P.S. i like that tune it plays also , i ended up downloading her album .:D
     
  14. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    thank u so much pbgbottle, its very nice to hear ur feedback, coz it took me
    time to develope these tools for others, and its not just stolen work like many
    try to "impress" and take credit that others deserve, but you give me nice
    feedback, and im happy i shared my knowledge with you and u shared for
    others the "how to" in an easy way so others will benefit from ur experience.

    thank you pbgbottle
    ;)
     
  15. dobbelina

    dobbelina MDL Senior Member

    Apr 2, 2009
    437
    556
    10
    I just got my bios flashed with the Asus string (B20C65BF)
    (thanks to offon7544 for that :D)
    Have downloaded the B20C65BF files from oembios.net and plan to run
    your utility soon.

    I was wondering, could you specify exactly what your tool does, so that
    in the future I might do a reverse.
    I mean: today VLK to OEM
    tomorrow OEM to VLK.
    Reason being, i'm a bootCD freak, and sometimes export my HDimage
    to other hardware/Virtual etc.(Yes, an image can be made hardware independent)
    Having a OEM isn't practical then for obvious reasons.

    I'm very impresed by what i have been reading so far, and thanks for
    spending time helping others :)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  16. pbgbottle

    pbgbottle MDL Member

    Mar 7, 2008
    140
    2
    10
    awsome i 'll take this aswell i have a legitimate VLK does this work in the same way ?
    create a folder copy the appropriate 4 VOL files or are they already built in to your utility , do i just run the utility .subsequently changing my key after .does it use any kind of VLK ? any info would be great .

    cheers PBGbottle
     
  17. dobbelina

    dobbelina MDL Senior Member

    Apr 2, 2009
    437
    556
    10
  18. xfilz

    xfilz MDL Novice

    Mar 30, 2008
    19
    0
    0
    #20 xfilz, Apr 6, 2009
    Last edited: Apr 6, 2009
    (OP)
    Hi there, happy to help you out, feedback appriciated.

    The VLK to OEM tool contains only pidgen and dpcdll.
    Thats why its smaller in size without the OEMBIOS files.
    No need to change key because its one valid OEM key.

    The OEM to VLK needs all OEMBIOS files to activate.
    Thats why its larger in size with the OEMBIOS files.
    Just change VOL key to the one you have from work.

    Be sure to keep in separate folders, to avoid errors.
    -OEMBIOS_supplement.exe in it own backup folder.
    -OEMBIOS_restoration.exe in its own OEM folder.
    -OEMBIOS-VLK_restore.exe in own VOL folder.

    This method just swapps the "corp. files" for you.
    Its not usefull to integrate on to an xp install cd.
    Then u just follow tutor in first post this thread,
    thats the way to preactivate the XP OEM system.

    If you like to add something cool to your install cd,
    try AntiWPA or maybe a nice tool called Tweak NT...

    xfilz
    :)