"Bump" Can nobody help me out here? Or even point me in the right directions as to where I can learn how to do this myself?? Like I said, both the DDR Voltage, and CPU VCore options are there already, I just can't raise the voltage on the CPU at all, and I can only take the memory up to 1.95v, and on my RAM sticks it says on the sticker that they require 2.1v... Although I ran Orthos stressing both the RAM and CPU for an entire night with the CPU clocked to 2.62ghz, I used 4x HT Multiplier, 250mhz for the CPU frequency, and the CPU multiplier set to 10.5x and left the voltages on "auto", and Orthos ran the entire night, and the CPU didn't get any hotter than 49c after being stressed for that length of time, so I would say that this is a stable overclock, but I know that if I had the ability to raise the voltages I could get even more out of this processor. If anyone at all can help me out here it would be highly appreciated!! Thanks in Advance again!
Hi Yen, Thanks for the reply man, I have sent you a private message regarding this matter. This is much appreciated.