Sorry I just saw the replies to my post. I don't know what caused the BSOD. This was installed on a secondary system with multiple boot disks that are connected via hot swap bays. I hadn't booted into the LTSC install in months, it's possible I shut the system off during an update or something. The install was not provided by the seller of the key, I think I got it on here. It hashes to SHA-1 0b8476eff31f957590ade6fe671f16161037d3f6 I have another LTSC activated with a different key that I have been using on a different machine without issue as my main computer.
All Thanks To @Enthousiast & other Seniors. 1. You have to just put the two files ( Eval ISO & the Corresponding Executable ) in a folder, run the executable & wait for the process to finish : https://forums.mydigitallife.net/threads/windows-10-svf-repository.63324/page-128#post-1468363 & You will end with the desired ISO in the same folder! Take care of the following : Don't put any other file in the same folder but only the two. Need not extract the Executable with Bandizip, etc. In the process, some file(s) may appear & disappear automatically but its all fine. No worries, let the process finish. ( Need not do anything with smv.exe ) Also take care as said by @bfoos : "The root of C: is protected in userspace. Try using another drive/partition" 2. This ISO is all good to go with & you can still use the same updates to make an up to date ISO : https://forums.mydigitallife.net/th...b-17763-xxx-pc-rs5.77945/page-51#post-1467631 Thanks. ...
@Enthousiast My ISO is: en_windows_10_enterprise_ltsc_2019_x64_dvd_be3c8ffb.iso It has an SHA1 of: Code: d5b2f95e3dd658517fe7c14df4f36de633ca4845 Is this the untouched ISO of 1809? I tried getting the updated ISO but it is above 4GB in size which I don't like because I have to disable Secure boot temporarily to be able to boot of the USB Flash Disk that's why I'm sticking to the first build of that 2019 Enterprise LTSC ISO
Could someone with an AMD Ryzen processor please check if the Ryzen Master software works on LTSC? Unfortunately, due to my account being new I cannot post links but it's readily available on AMD's website edit: I tested Ryzen Master 2.1.1 and it worked fine on LTSC
Check out... [SOLUTIONS] Installing Windows on UEFI System with install.wim over 4 GB EDIT: Remembered to check the install.wim of LTSC ISO is only 3.3 GB.
Yes, this was the user error on my side. Initially I had issues getting the larger .exe to do what it is coded for, so I unpacked it with Bandizip to circumvent that initial issue succesfully. I didn't know hitting the smv.exe is not supposed to work. I forgot that and copied that user error to other systems. When it finally downed on me, I got it working on the target laptop with the EVAL Windows, which the new .iso promptly replaced. Activation with KMS was straight forward as advertised, love it. The laptop is finally ready for their new owners, with the ball bearing of the noisy ventilator relubbed with a touch of sewing machine oil, dust blown out, removed some broken plastic from the inside (unfortunately one hinge is broken, but laptop is mechanical fully functional) and a TP-Link Archer T2U USB-adapter as a replacement of the broken internal WiFi adapter. And I'm ready for class tomorrow as well. Thanks to Enthuosiast and Eneloop1! You and other MDL-ers make this forum the place to be for Windows!
The answers are already there where you left! For eg. the posts from the likes of @Carlos Detweiller. Still to say briefly : The keys are normally bound to particular edition. So, Fizbin asked whether you are using the key on the same edition ? For eg. LTSC 2019 offers two editions "Enterprise & Enterprise N" . A key for "Enterprise" will not work for "Enterprise N" & vice versa. Besides, It seems that the key will not be able to pass the verification anymore & so will not be able to freshly activate anything. It has been blocked for some reasons! Its a very common scenario for the open keys, bought from e-bay & other sellers. I would advise to not to waste the money on such keys. For now : I don't know & am not interested in the authenticity / validity of your transaction with e-bay , whether you have a valid receipt, etc. But I think its not very difficult for them to provide you an alternate key. Just make sure that you are able to use the key on the Untouched / Official M$ iso & activate it yourself! P.S. This is the right time to understand the importance of a System Image when the OS is activated & working all well. Thanks. ...
New 1809 Updates: https://forums.mydigitallife.net/threads/windows-10-hotfix-repository.57050/page-496#post-1595736
I think you should head there : https://forums.mydigitallife.net/threads/repo-windows-10-telemetry-repository.63874/ Thanks. ...
This can happen when some (language) feature is installed/enabled after the CU is installed/integrated. Addition: I noticed the "installed Updates" showing dates from march, when integrating updates to a windows image it's best to start with a clean base wim, not containing any previously integrated updates and better to use W10UI for the best integration experience.
@Enthousiast Ah..ok Btw.... To my knowlegde are those updates intergrated in this version >> Windows 10 Enterprise LTSC 1809 -- 17763.316 It's updated until Feb2019 Correct? Code: Windows 10 version 1809 updated feb2019 en_windows_10_enterprise_ltsc_2019_x86_dvd_892869c9.iso 88af607f1e752761577d21f2b7aa98692809bf66 nl_windows_10_enterprise_ltsc_2019_x86_dvd_7de5cbe9.iso 56A4E9E77605276E0DB6D25F17F69EDE089C92BA It Includes >> Net Framework 4.7 2018-11 Update for Windows 10 Version 1809 for x86-based Systems (KB4470788) Security Update for Adobe Flash Player-Wi 10-1809 -x86 (KB4537759) after installing this version, WU added these updates >> (back in April...) 2020-02 Cumulative Update for .NET Framework-3.5-4.8 -Win10-1809 (KB4538156) = windows10.0-kb4537490-x86 ( Net Framework 4.7.03190) 2020-02 Security Update for Adobe Flash Player-Wi 10-1809 -x86 (KB4537759) 2020-04 Servicing Stack Update for Windows 10 Version 1809 for x86-based Systems (KB4549947) 2020-04 Cumulative Update for Windows 10 Version 1809 for x86-based Systems (KB4550969) I used this as a base image for updating. By clean base image, u mean the 17763.1 version? I see no real problem in using the 17763.316 as a base. Pls correct me if wrong PS: Is it possible to remove those 2 packages from the WIM, then it's also a clean base like 17763.1 (not used this one so no idea there) Thx for the info and keep up the good work