How to Use New Phoenix Bios Mod Tool to Modify Phoenix/Dell/Insyde/EFI Bios Files

I can't mod bios "rw" ACPI table incomplete

Help ,I want to mod Pheonix bios but I put a ACPI .rw file with error incomplete so I can't flash bios.

 

Is there a way to use the tool to mod a Fujitsu Siemens bios?

The files seem to be an ocf and the tool doesn't seem to like it.

 

Thanks a lot for the info

 

Modding a Lenovo A51 8131 35U, Bios 2FJT25A, Phoenix BIOS (new style) because I could not find one modded. I followed the steps "how to modify and flash lenovo bioses" to step # 11.

11. After parsing $01B8200.FL1 bios file, a window will appear showing what SLIC is presently in the bios file and that slic is lenovotp-7u.

12. Therefore, we need to use SLIC lenovotp-7u 2.1 to modify it - the point here is to choose the exact slic v2.1 that matches the slic 2.0 that is in the bios in which we are going to modify.


step 11 state slic lenovotp-7u should appear, but that does not happen. The window that pop up does not show that, what am I doing wrong?

the pop up win shows
Header (oemid_oemtable LTP) in bioscodo2.rom(x1)
Pubkey in mod_4a01.rom(x1)

I was expecting it to show lenovotp-7u.

RW
Root System Description Pointer: 0x000F6590

52 53 44 20 50 54 52 20 8F 50 54 4C 54 44 20 00RSD PTR .PTLTD .
6F 4D 6F 7F oMo.

Signature"RSD PTR "
Checksum0x8F (143)
OEM ID"PTLTD "
Revision0x00 (0) - ACPI 1.0
RSDT Address0x7F6F4D6F

 

Just wanted to say a giant thank you for the effort of all the people on MDL. I've already successfully modded 3 BIOSes following your instructions, my desktop pc and 2 laptops. Unfortunately I can't post them due to my low post count. Keep up the good work.

 

Thanks, I will give it a try.

 

I did the mod successfully. But it would not flash.

I used winPhlash that came with the bios and it is telling me that

"Part ID of system bios and new Image file are different (system =2fkt25aus, file = 7uet79ww). The system platform may be different from the image file. Are you sure you want to proceed?"

When i clicked yes to proceed, my system (win xp) freezes.

The system rebooted normally.

I will have to figure out a way to flash it.

 

Hi Busykid508! I have read this post and do it! But, when i choose BIOS.FL1 (lenovo t61), this tool show "lenovotp-1E", i don't have it, but there are many another SLIC such as "lenovotc-5m, lenovotp-7y,...". Can I use SLIC lenovotc-5m or lenovotp-7y,...?
Thanks!

 

I cannot figured out to flash it. If I post a request would someone able to mod it for me so I can flash it?

 

Thanks for your instructions Busykid508!
Very clear and detailed; worked like a charm!

 

Busykid - thanks! Just SLIC'ed some previously unSLICable Dell BIOSes and they worked like a champ (Optiplex SX280/Optiplex GX620)

 

You need to login to view this posts content.

 

nice thread. thanks for all the useful posts

 

in desperate need to add custom logo to DELL
Optiplex 780
and
Latitude E6410

will pay.

can you help ?

I can be reached at tony(at)780tech(dot)com
or
abnetlo(at)gmail(dot)com

 

Thanks busykid. Just modded a Dell Dimension 4700 and it worked perfectly. It reports that it is now permanently activated!! Also thanks to opa's tool . Made installing the certificate and oem key a breeze.

 

Having an issue with the tools modding a Dell PowerEdge 850 Bios, it mods correctly but show slic as invalidated with SLIC TK.

both are at mediafire dot com

Here is the bios unmodified.

/file/3m8n9a0lfyo8lb6/mm-a04C.exe

Here is the RW everything log

/file/6ckpgbr8abc84wp/AcpiTbls.rw

Any help with what I'm doing wrong?

 

Many thanks for the clear instruction which can be easily followed. I finished the procedure successfully, but failed to flash the bios. I got message 'Part ID of the System BIOS and new Image File are different (System = , file = VAIO). the System platform may be different from the Image file. Are you sure you want to proceed?' Aftger I pressed 'Yes' I got BIOS update failed! ... Error Code: -149'. Could you please advise. It is for my Vaio laptop VGN-TZ21WN. Many thanks in advance.

 

Hello
Can i modify my bios:
_ttp://support1.toshiba-tro.de/tedd-files2/0/bios-20070807154017.zip
with Phoenix Bios Mod Tool?
Thank you.

 

Can anyone help me with a Compaq Presario V3000?
Board is a Wistron 30B5.
Using latest BIOS (F3D).

I tried 2 different BIOS mods posted on the forums here (both based on F3D) and both gave me a half-mapped SLIC (therefore invalid).

I tried the BIOS by Fzeven from here ( forums.mydigitallife.net/threads/814-Award-amp-AMI-Bios-mod-requests.-Previous-requests?p=15457#post15457 ) which is very old (F39) and only has a 2.0 SLIC, but it actually mapped correctly, and SLIC ToolKit reports the SLIC as being totally valid.

How the hell did Fzeven make that 2.0 SLIC which fills the entire SLIC table and actually works? I can't get it to work at all