Master Password for dell latitude d830 Unlock Setup

You need to login to view this posts content.

 

I just found an 1.8 IDE external enclosure. I just want to verify before I purchase it, if I make it an external drive, will I be able to access/fdisk/low level format the disk so I can use it? Because as far as I research the password is inside the Hard Disk.

 

I have no idea. It's best if you can plug the drives into a PC with SATA ports on it.

 

Hi to everyone. Just replace mobo in my Dell Latitude D830 with refurbished one. But refurbished mobo is setup locked. My service tag is C222W1S - 595B

Can someone help me ?

 

You need to login to view this posts content.

 

Ok, I have finally been able to access my hard disk but hdparm is not able to unlock it... Google for the default manufacturer master password and it says 32 "t" but it didn't work. ***sigh***

[root@localhost ~]# hdparm -I /dev/sdc
/dev/sdc:
ATA device, with non-removable media
Model Number: SAMSUNG HS08XJC
Serial Number: S18EJ16PB06838
Firmware Revision: GR100-01
Security:
Master password revision code = 65534
supported
enabled
locked
not frozen
not expired

[root@localhost ~]# hdparm --user-master u --security-unlock p
/dev/sdc security_password="p" /dev/sdc:
Issuing SECURITY_UNLOCK command, password="p", user=user
SECURITY_UNLOCK: Input/output error

[root@localhost ~]# hdparm --user-master u --security-disable p
/dev/sdc security_password="p" /dev/sdc:
Issuing SECURITY_DISABLE command, password="p", user=user
SECURITY_UNLOCK: Input/output error

[root@localhost ~]# hdparm --user-master u --security-unlock tttttttttttttttttttttttttttttttt
/dev/sdc security_password="tttttttttttttttttttttttttttttttt" /dev/sdc:
Issuing SECURITY_UNLOCK command, password="tttttttttttttttttttttttttttttttt", user=user
SECURITY_UNLOCK: Input/output error

My Hard Disk is:
Samsung
Model: HS08XJC
HDD P/N: HS08XJC/D
lba 153,301,488 80gb n1c
S/N: S18EJ16PB06838

Any help extended is highly appreciated. I'm open for any suggestion

 

Btw, I have downloaded UltimateBootCD but none of the tools there was able to detect the HD and wasn't able to unlock it. Aside from hdparm, I have tried nwipe (dwipe) but it error out around 4 hours of running... shred also work but still didn't unlock it.

 

Looks like you only tried the user password...did you try the master option?

 

i usually do this for 20 USD but i will make an exeption for you to tell you friends about me
your password is : ayvcph7q
good luck

 

Same result

[root@localhost ~]# hdparm --security-unlock p /dev/sdc
security_password="p"
/dev/sdc:
Issuing SECURITY_UNLOCK command, password="p", user=master
SECURITY_UNLOCK: Input/output error

[root@localhost ~]# hdparm --security-unlock tttttttttttttttttttttttttttttttt /dev/sdc
security_password="tttttttttttttttttttttttttttttttt"
/dev/sdc:
Issuing SECURITY_UNLOCK command, password="tttttttttttttttttttttttttttttttt", user=master
SECURITY_UNLOCK: Input/output error

 

Btw, I have tried also atapwd and hdderase but they are also asking for master password

 

I have the same problem. System # 76plld1-595b

 

dell hdd password recovery

dear sir,

my dell service tag is service tag : G5KXVS1 HDD=***W2AD8xkl-1d3b

pls send me the password to recover hdd

 

You need to login to view this posts content.

 

Hello

I do not know if I'm on the right post to get the password hard drive...

If anyone can help. please...

Model Latitude E5520
Service Tag: 35J2LQ1
Express Service Code: 6864712057
Hard Drive number is: #XH1A3133254-1D3B

 

I have a dell inspriron 1420 that has a setup lock on it. service tag 4n9d8f1. I cannot get passed it. Is there a master code I can put in there?

Express service code: 10113585373.

 

look at my link up 3 posts.

 

No updates... Looks like I have to wait until a HD is available in the local store.

 

I also have a Dell D810 with Password Set. Any help with a master password? Service Tag 3KNRH71 Express Service Code 7779583693 , Thanks!

 

Help! I have a Dell Latitude D830 with a service tag GRDSQH1-595B and it's asking for a password to access the data... The BIOS revision is A13 help?