MSMG ToolKit

MSMG · Oct 20, 2021

Okay will check and make the necessary changes, need to check with server OS too.

RaiyvaN said: ↑

So I put the commands in the order, in which it was displayed on screen in my test.
And it was like this:

Code:

:: Setting Host OS version, architecture and language variables
set HostOSName=
set HostEdition=
set HostBuildBranch=
set HostReleaseBranch=
set HostDisplayVersion=
set HostVersion=
set HostBuild=
set HostServicePackBuild=
set HostInstallationType=
set HostArchitecture=
set HostLanguage=

for /f "tokens=1 delims=" %%p in ('wmic os get Caption ^| find /v "Caption"') do (for /f "delims=" %%b in ("%%p") do (set "HostOSName=%%~nb"))
for /f "tokens=3 delims= " %%l in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "EditionID" ^| find "REG_SZ"') do (set "HostEdition=%%l")
for /f "tokens=3 delims= " %%j in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "BuildBranch" ^| find "REG_SZ"') do (set HostBuildBranch=%%j)
for /f "tokens=3 delims= " %%j in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /f "ReleaseId" ^| find "REG_SZ"') do (set /A HostReleaseVersion=%%j & if "%%j" lss "2004" set /A HostDisplayVersion=%%j)
if "%HostDisplayVersion%" equ "" for /f "tokens=3 delims= " %%k in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "DisplayVersion" ^| find "REG_SZ"') do (set HostDisplayVersion=%%k)
for /f "tokens=4-5 delims=. " %%s in ('ver 2^>nul') do (set "HostVersion=%%s.%%t")
for /f "tokens=1 delims=" %%i in ('wmic os get BuildNumber ^| find /v "BuildNumber"') do (for /f "delims=" %%b in ("%%i") do (set /a HostBuild=%%~nb))
for /f "tokens=3 delims= " %%r in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "UBR" ^| find "REG_DWORD"') do (set /a HostServicePackBuild=%%r)
for /f "tokens=3 delims= " %%m in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "InstallationType" ^| find "REG_SZ"') do (set HostInstallationType=%%m)
if exist "%SystemROOT%\SysWOW64" (set "HostArchitecture=x64") else (set "HostArchitecture=x86")
rem for /f "tokens=6 delims= " %%o in ('DISM /Online /English /Get-Intl ^| findstr /i /C:"Default system UI language"') do (set "HostLanguage=%%o")
for /f "tokens=3 delims= " %%o in ('reg query "HKLM\SYSTEM\CurrentControlSet\Control\CommonGlobUserSettings\Control Panel\International" /v "LocaleName" ^| find "REG_SZ"') do (set "HostLanguage=%%o")

Note: I preferred HostOSName through wmic. But I do not know if it's right in Windows 11.

Code:

echo.Reading Host OS Information...
echo.
if "%HostBuild%" lss "19041" (
   echo.%HostOSName% ^(%HostDisplayVersion%^) - v%HostVersion%.%HostBuild%.%HostServicePackBuild% %HostArchitecture% %HostLanguage%
) else (
   echo.%HostOSName% ^(%HostReleaseVersion% %HostDisplayVersion%^) - v%HostVersion%.%HostBuild%.%HostServicePackBuild% %HostArchitecture% %HostLanguage%
)

That way I had put it before it was only a palliative for that moment.
This way:

Code:

rem for /f "tokens=3*" %%p in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v "ProductName" ^| find "ProductName"') do (if "%HostBuild%" lss "21996" (set "HostOSName=%%p %%q") else (set "HostOSName=%%p 11"))

Click to expand...

MSMG · Oct 20, 2021

Not yet, there are too many packs to be updated this time.

tefor said: ↑

Has NET5 pack been updated to new version which is Microsoft .NET Desktop Runtime 5.0.11 Build 30524 ?
Click to expand...

MSMG · Oct 20, 2021

ToolKitHelper.exe works independently of Toolkit, the frequent updates for ToolKitHelper.exe and ToolKit.cmd is meant for next version to be released but you can use it with the current version.

If you are sticking to source image with older CU specified in the current version, then you can skip the ToolKitHelper.exe and just use the ToolKit.cmd.

The AV programs flagging the ToolKitHelper.exe as Virus/Malware/Trojan is just a false positive sign and it's due to the code protection programs used to protect the code.

jinvidia said: ↑

@MSMG - Sir i see frequent updates for toolkithelper.exe and toolkit.cmd. These are meant for the latest toolkit v11.8 right ?. Correct me if I am wrong. Thank you

edit: toolkithelper.exe is flagged as a malware in kaspersky. Previously there was no such issue. Can you kindly rectify this ?. May be some new virus definitions and signatures were added to the antivirus and this is causing the toolkithelper.exe to be flagged as a virus. Is there anything which can be done to avoid this ?. I have excluded the toolkit directory in KIS but still previously there was no such issue even if the toolkit folder was not placed in the exclusion list of KIS.
Click to expand...

MIMMO61 · Oct 20, 2021

Good morning.
I set in toolkit [4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check
I also applied via toolkit the registry key as suggested in the post # 20882
The ISO regularly installs on the latest version of VirtualBox, I tried in the host computer, unfortunately I always get the message that the installation is not possible because of the TPCM.

JLT2000 · Oct 20, 2021

MIMMO61 said: ↑

Good morning.
I set in toolkit [4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check
I also applied via toolkit the registry key as suggested in the post # 20882
The ISO regularly installs on the latest version of VirtualBox, I tried in the host computer, unfortunately I always get the message that the installation is not possible because of the TPCM.
Click to expand...

I done this to my image

[4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check

and i use the final version of VM Player 15.5.7.

It dosent work without the Tweak, after Ver. 10.0.22000.184

Titanos · Oct 20, 2021

MIMMO61 said: ↑

The ISO regularly installs on the latest version of VirtualBox, I tried in the host computer, unfortunately I always get the message that the installation is not possible because of the TPCM.
Click to expand...

Add this to computer registry:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\Setup\MoSetup]
"AllowUpgradesWithUnsupportedTPMOrCPU"=dword:00000001

MIMMO61 · Oct 20, 2021

JLT2000 said: ↑

I done this to my image

[4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check

and i use the final version of VM Player 15.5.7.

It dosent work without the Tweak, after Ver. 10.0.22000.184
Click to expand...

With VirtualBox 6.1.28 works, the problem is with the host computer.

MIMMO61 · Oct 20, 2021

You need to login to view this posts content.

Titanos · Oct 20, 2021

You need to login to view this posts content.

umut24 · Oct 20, 2021

When will 11.9 be released ???

MIMMO61 · Oct 20, 2021

You need to login to view this posts content.

MIMMO61 · Oct 20, 2021

You need to login to view this posts content.

MSMG · Oct 20, 2021

Use the latest VMware Workstation Pro or Player 16.2.0.18760230

Adding the below software level TPM to Workstation Pro and Workstation Player will enable you to run the VM without entering the Encryption password each time.

- Go to the directory where the VM is stored (for example C:\VM\Windows 11)
- Open the file with the .vmx extension with Notepad
- Add the line managedvm.autoAddVTPM = "software"
- Save the file by closing it
- Double click on it to open it in VMware Workstation Pro or Player
- Start your VM

JLT2000 said: ↑

I done this to my image

[4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check

and i use the final version of VM Player 15.5.7.

It dosent work without the Tweak, after Ver. 10.0.22000.184
Click to expand...

MIMMO61 said: ↑

Good morning.
I set in toolkit [4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check
I also applied via toolkit the registry key as suggested in the post # 20882
The ISO regularly installs on the latest version of VirtualBox, I tried in the host computer, unfortunately I always get the message that the installation is not possible because of the TPCM.
Click to expand...

MSMG · Oct 20, 2021

It will take time as I need to update the Toolkit Packs and also update the ToolKitHelper to support latest Patch Tuesday CU's for Windows 10.

umut24 said: ↑

When will 11.9 be released ???
Click to expand...

MIMMO61 · Oct 20, 2021

MSMG said: ↑

Use the latest VMware Workstation Pro or Player 16.2.0.18760230

Adding the below software level TPM to Workstation Pro and Workstation Player will enable you to run the VM without entering the Encryption password each time.

- Go to the directory where the VM is stored (for example C:\VM\Windows 11)
- Open the file with the .vmx extension with Notepad
- Add the line managedvm.autoAddVTPM = "software"
- Save the file by closing it
- Double click on it to open it in VMware Workstation Pro or Player
- Start your VM
Click to expand...

I made tests eliminate from the ISO only the "appraiserres.dll" file W11 is installed by avoiding hardware verge.
I have not entered the registry keys.

Enthousiast · Oct 20, 2021

MIMMO61 said: ↑

I made tests eliminate from the ISO only the "appraiserres.dll" file W11 is installed by avoiding hardware verge.
Click to expand...

= upgrades only.

MIMMO61 said: ↑

I have not entered the registry keys.
Click to expand...

= boot.wim index 2 and for clean installs only.

graver.x · Oct 20, 2021

MIMMO61 said: ↑

Good morning.
I set in toolkit [4] Customize > [8] Apply Tweaks A] Disable Windows 11 Installer Hardware Check
I also applied via toolkit the registry key as suggested in the post # 20882
The ISO regularly installs on the latest version of VirtualBox, I tried in the host computer, unfortunately I always get the message that the installation is not possible because of the TPCM.
Click to expand...

Titanos said: ↑

Edit:
Copy install.wim from win11 iso to a win10 iso (replace that file). Use the new created iso (win10 install files + win11 install.wim).
Works 100%.
Click to expand...

Yes. Therefore, I did not just immediately suggest this cardinal method

graver.x said: ↑

But there are ways around the new requirements. Why not use it?
For example, take Win 10 ISO and replace Win 10 install.wim in it with Win 11 install.wim
And if you just wait for something, then you can not wait for anything... after all, the problem inconveniences not Oracle, but you. We need to help ourselves somehow.
Click to expand...

MIMMO61 · Oct 20, 2021

graver.x said: ↑

Yes. Therefore, I did not just immediately suggest this cardinal method
Click to expand...

Thank you for alternative solutions.
For my curiosity, eliminating only the file "appraiserres.dll" wouldn't the problem solve the same?

Enthousiast · Oct 20, 2021

MIMMO61 said: ↑

Thank you for alternative solutions.
For my curiosity, eliminating only the file "appraiserres.dll" wouldn't the problem solve the same?
Click to expand...

As said, the appraiserres.dll fix is for upgrade scenarios only, here you can read all info:
https://forums.mydigitallife.net/threads/win-11-boot-and-upgrade-fix-kit-v2-0.83724/

MIMMO61 · Oct 20, 2021

Enthousiast said: ↑

As said, the appraiserres.dll fix is for upgrade scenarios only, here you can read all info:
https://forums.mydigitallife.net/threads/win-11-boot-and-upgrade-fix-kit-v2-0.83724/
Click to expand...

OK! Thanks I understand.
Perhaps it is better to do the opposite, copy only the file "intall.vim" (W11) inside the W10 ISO.

MSMG ToolKit

MSMG MDL Developer

MSMG MDL Developer

MSMG MDL Developer

MIMMO61 MDL Senior Member

JLT2000 MDL Junior Member

Titanos MDL Novice

MIMMO61 MDL Senior Member

MIMMO61 MDL Senior Member

Titanos MDL Novice

umut24 MDL Novice

MIMMO61 MDL Senior Member

MIMMO61 MDL Senior Member

MSMG MDL Developer

MSMG MDL Developer

MIMMO61 MDL Senior Member

Enthousiast MDL Tester

graver.x MDL Senior Member

MIMMO61 MDL Senior Member

Enthousiast MDL Tester

MIMMO61 MDL Senior Member