@kenshinmokota: as far as i know Gigabyte still has its Dual-Bios, so there will also still be the built-in Bios-Flash utility, called QFlash. Call it by pressing f8 while in Bios Setup. then choose "update Main Bios from Floppy" and insert a floppy disk with the modded Bios on it. thats all. Pretty easy with Gigabyte. That is if its still the same concept as with the old boards. for the paradox crack do the following: after flashing, boot into vista. then run the "oemtool.exe" which came with the paradox crack. press "uninstall driver", reboot. If you are running paradox with the same certificate as the modded bios slic table would support, you will not do anything else. its that simple. only if you used a different cert with paradox (one which is not identical with the requested slic) you will have to remove the cert and put a new, fitting one in. use the slmgr.vbs method.
Apology however the Bios gives it only on the Siemens side and then also only with PC serial number translated with google In deutsch: Entschuldigung jedoch gibt es das Bios nur auf der Siemens Seite und dann auch nur mit Seriennummer vom PC
Doesn't matter. Let's say 1405 UNMODDED! Please report Everest RSDT table XSDT and hopefully SLIC . Yen
Please wait 15 min I have to check the mod again!!! Stay tuned!!! Have updated link. It´s now a rar file, sorry for that. XSDT is another table that may occur. Yen
XSDT Extended System description Table. Now you may try the mod (rar file). But it could be that asus integrated a routine which blocks address call Yen
Hi Yen and China4Ever, Yen Mod is not good: CMOS boot errors + not able to save BIOS + BSOD during Vista loading then reboot. This will then repeat it’s self so I am not able to fully load up Vista. Tried China’s Mod 3 with CMOS reset then EZ flash then Asusupdate from OS. All have same issue of no SLIC and wrong RSDT table, BUT no CMOS boot errors + no saving BIOS setting issues. Tried China’s Mod 4 with CMOS reset then EZ flash then Asusupdate from OS. All have same issue of CMOS boot errors + not able to save BIOS settings + hard lock after warm restart needing full power off to fix. SLIC is missing but RSDT table is correct. Given up now so back to China’s working 1202 mod for now until someone can find a fix or Asus bring out a newer version over 1405 and we all try again….. Regards, Discoboy
@ Discoboy: You tried the mod I posted too early or that one in rar archive? The mod before was not perfect Yes please and if you want i have one more idea..to release tomorrow Yen
Hi Yen, RAR file is better but not good: - CMOS boot error + BIOS settings not saving - OS now loads fully to desktop - SLIC now = _ASUS_ - RSDT now = _ASUS_ - Do not know where to find XSDT - BUT Vista is NOT activated i.e 20days left to go etc...